Abstract:NASICON structural materials have the advantages of structural stability, high ion conductivity, and high working potential, which have attracted widespread attention as cathode for sodium-ion batteries. Although the three-electron reaction in the NASICON structure Na3MnTi(PO4)3 increases the specific capacity of the material, poor electronic conductivity remains a key factor restricting its practical application. Herein, Na3Mn1-xZrxTi(PO4)3/C (x = 0, 0.01, 0.03, 0.05, 0.07 and 0.1), a typical three-dimensional NASICON structure cathode material for sodium-ion batteries, was synthesized by the sol-gel method. Through powder X-ray diffraction, the Zr4+ doping in the Na3MnTi(PO4)3 (NMTP) structure was verified. It was found that doping trace amounts of Zr at the Mn site can not only reduce the Jahn-Teller effect caused by Mn3+, but also strengthen the Zr-O bond compared to the Mn-O bond, making the crystal structure more stable by reducing the proportion of Mn. According to the findings of the EIS test, a suitable amount of Zr doping can enhance the electronic conductivity and Na ion diffusion coefficient of NMTP/C electrode materials, weaken polarization phenomena, increase electrode reaction rate, and significantly improve the rate performance and cycling performance of Na3Mn1-xZrxTi(PO4)3 material. The Na3Mn1-xZrxTi(PO4)3/C sample prepared has high initial capacity of 124mAh/g, a capacity retention rate of 86 % after 200 cycles at 0.2C, and a capacity retention rate of 84 % after 500 cycles at 1C. This proves that the material still exhibits excellent cycling stability and structural stability after high current cycling. More importantly, the Na3Mn0.95Zr0.05Ti(PO4)3 (Zr5-NMTP)//Hard carbon full battery also exhibits ideal electrochemical performance.

Zr 4+ -doped sodium manganese oxide: enhanced electrochemical performance as a cathode in sodium ion batteries

Physical properties and electrochemical performance of Zn-substituted Na$_{0.44}$Mn$_{1-x}$Zn$_x$O$_2$ nanostructures as cathode in Na-ion batteries

Zr-doped O3-type NaNi1/3Fe1/3Mn1/3O2 Cathodes with Enhanced Structure Stability for Sodium-Ion Batteries

Improving High-Voltage Cycling Stability and High-Rate Capability of Sodium-Ion Layered Cathode Oxides through Trace Amounts of Low-Valence Metals

Engineering sodium-rich manganese oxide with robust tunnel structure for high-performance sodium-ion battery cathode application

Effect of Zr4+ doping on the electrochemical properties of Na3MnTi(PO4)3/C cathode materials

Achieving Stable Zinc-Ion Storage Performance of Manganese Oxides by Synergistic Engineering of the Interlayer Structure and Interface

Zn‐doped hollow cubic MnO2 as a high‐performance cathode material for Zn ion batteries

Toward high stability of O3‐type NaNi1/3Fe1/3Mn1/3O2 cathode material with zirconium substitution for advanced sodium‐ion batteries

Multi-element doped hexagonal sheet Ni/Mn-based layered oxide with ZrO2 surface modification for sodium ion batteries cathode with high capacity and good cycle/air stability

Zinc-substituted P2-type Na0.67Ni0.23Zn0.1Mn0.67O2 cathode with improved rate capability and cyclic stability for sodium-ion storage at high voltage

Enhanced electrochemical performance of iron-manganese based cathode by Li doping for sodium-ion batteries

A novel NASICON-type Na3MnTi0.5Zr0.5(PO4)3 cathode material with multivalent redox reaction for high performance sodium-ion batteries

Ultrafast Charge‐Discharge Capable and Long‐Life Na3.9Mn0.95Zr0.05V(PO4)3/C Cathode Material for Advanced Sodium‐Ion Batteries

Core–Shell Structure and X‐Doped (X = Li, Zr) Comodified O3‐NaNi0.5Mn0.5O2: Excellent Electrochemical Performance As Cathode Materials of Sodium‐Ion Batteries

A Multiphase Coupling Strategy to Structurally Stable Manganese-Based Oxides Cathode for High Electrochemical Performance Sodium Ion Batteries

Unraveling the functioning mechanism of fluorine-doping in Mn-based layered oxide cathodes toward enhanced sodium-ion storage performance

Ultralow‐Strain Zn‐Substituted Layered Oxide Cathode with Suppressed P2–O2 Transition for Stable Sodium Ion Storage

Achieving a Deeply Desodiated Stabilized Cathode Material by the High Entropy Strategy for Sodium‐ion Batteries

Anion–Cation Synergetic Contribution to High Capacity, Structurally Stable Cathode Materials for Sodium‐Ion Batteries

Sodium-Potassium Co-doped Layered Manganese Dioxide Cathode Material for High Performance Aqueous Zinc-Ion Batteries