GO-functionalized MXene towards superior anti-corrosion coating

Yujie Qiang,Boyuan Ran,Minjiao Li,Qian Xu,Jian Peng

DOI: https://doi.org/10.1016/j.jcis.2023.03.167

IF: 9.9

2023-04-07

Journal of Colloid and Interface Science

Abstract:MXene flakes shows the great potential in corrosion protection area owing to their lamellar structure and remarkable mechanical features. However, these flakes are highly susceptible to oxidation, which results in their structure degradation and restrict their application in anti-corrosion field. Herein, graphene oxide (GO) was used to functionalize Ti 3 C 2 T x MXene through TiOC bonding to fabricate GO-Ti 3 C 2 T x nanosheets, which proved by Raman, X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FT-IR). GO-Ti 3 C 2 T x nanosheet inclusion into the epoxy coating and their corrosion performance in 3.5 wt.% NaCl solution with 5 MPa pressure was evaluated through electrochemical techniques including open circuit potential (OCP) and electrochemical impedance spectroscopy (EIS) along with salt spray. Results indicated that GO-Ti 3 C 2 T x /EP presented superior anti-corrosion capability, the impedance modulus at low frequency (|Z| 0.01 Hz ) was above 10 8 Ω cm 2 after 8 days' immersion in 5 MPa environment, which was 2 orders of magnitude higher than that of the pure epoxy coating. Scanning electron microscope (SEM) and salt spray images demonstrated that the epoxy coating loaded with GO-Ti 3 C 2 T x nanosheet could provide robust corrosion protection for Q235 steel via the physical barrier effect.

chemistry, physical