Abstract:Ammonia is one of the most produced chemicals worldwide and is currently synthesized by the Haber-Bosch process, which is a thermally catalyzed method that requires high pressures and temperatures. These harsh conditions, in addition to the prerequisite steam reforming process, leads to about 1 % of the annual energy consumption and 1.4 % of the global CO 2 emission. One way to mitigate some of the Haber-Bosch process is to produce ammonia electrochemically, utilizing renewable energy sources. The electrochemical synthesis of ammonia faces several big issues. One being the selectivity, since the more facile hydrogen evolution reaction (HER) will always dominate over the nitrogen reduction reaction (NRR), and another issue being the activity, given that the nitrogen triple bond is very stable and therefore hard to split. Hence, most often the reported ammonia contents are in the low ppm regime, which makes it very susceptible to contaminations both from the gas stream (NH 3 and NO x impurities) and the system itself (catalyst, cell, chemicals, nitrile gloves, etc.). To avoid misleading results, several protocols have been published on how to correctly perform NRR experiments [1, 2]. One of these confirm that only the Li-mediated ammonia synthesis (LiMeAS) is currently able to produce ammonia electrochemically [3]. The actual mechanism is not fully understood, but it is generally believed that the first step is Li plating from a Li salt containing non-aqueous electrolyte. The very reactive Li will then react with N 2 solvated in the electrolyte to form Li 3 N, which is believed to hydrolyze to ammonia when in contact with a proton source. The currently highest archived faradaic efficiency (FE) is at 69 % at 20 bar N 2 pressure when applying an ionic liquid as a proton shuttle [4]. In this work, we achieved up to 79 % FE at 20 bar N 2 by the addition of 0.8 mol. % O 2 in the reaction atmosphere. The positive effect of O 2 is a very counterintuitive observation, since the original work by Tsuneto et al. [5] showed that the use of synthetic air significantly hindered the reaction, as it was postulated that O 2 inhibits the reaction due to LiO 2 formation and/or leading primarily to the oxygen reduction reaction (ORR). We will present experimental results obtained at 10 and 20 bar with varying O 2 contents, which were measured accurately by a mass spectrometer probing the atmosphere just above the electrolyte inside the pressure vessel. By combining experimental observations with theoretical modelling, we conclude that the unexpectedly beneficial role of small O 2 concentrations has a positive influences the solid electrolyte interface (SEI), which is of great importance in our system. Additional ex-situ X-Ray diffraction (XRD) and X-Ray photoelectron spectroscopy (XPS) measurements were conducted without exposure to air and moisture, to analyze the SEI layer and deposition after electrochemistry. We believe that this study will not only be beneficial for industrializing the LiMeAS, but will also bring us a step further in understanding the complex mechanism behind this process. [1] S. Z. Andersen et al., "A rigorous electrochemical ammonia synthesis protocol with quantitative isotope measurements," Nature, vol. 570, pp. 504-508, 2019. [2] H. Iriawan et al., "Methods for nitrogen activation by reduction and oxidation," Nature Reviews Methods Primers, vol. 1, no. 1, pp. 1-26, 2021. [3] J. Choi et al., "Identification and elimination of false positives in electrochemical nitrogen reduction studies," Nature communications, vol. 11, no. 1, pp. 1-10, 2020. [4] B. H. Suryanto et al., "Nitrogen reduction to ammonia at high efficiency and rates based on a phosphonium proton shuttle," Science, vol. 372, no. 6547, pp. 1187-1191, 2021. [5] A. Tsuneto, A. Kudo, and T. Sakata, "Lithium-mediated electrochemical reduction of high pressure N2 to NH3," Journal of Electroanalytical Chemistry, vol. 367, no. 1-2, pp. 183-188, 1994.

Li-N 2 Battery for Ammonia Synthesis and Computational Insight

Cu(N 2 )-Li Battery for Ammonia Synthesis

Lithium‐Mediated Nitrogen Reduction for Ammonia Synthesis: Reviewing the Gap between Continuous Electrolytic Cells and Stepwise Processes through Galvanic Li─N2 Cells

Solvent effects in Li-mediated synthesis

Mechanistic insights into the stepwise lithium-mediated electrochemical nitrogen reduction for enhanced ammonia synthesis

Solvent engineering enables long-term continuous lithium-mediated ammonia synthesis

Pathway toward Scalable Energy-Efficient Li-Mediated Ammonia Synthesis

Lithium-mediated electrochemical nitrogen reduction: Mechanistic insights to enhance performance

Enhancement of Lithium-Mediated Ammonia Synthesis By Addition of Oxygen

Mechanistic Insights into Lithium-Mediated Nitrogen Reduction Reaction for Ammonia Electrosynthesis

Investigating Solid Electrolyte Interphase Layer Dynamics in the Electrochemical Li-Mediated Ammonia Synthesis

Direct in situ NMR observation of lithium plating, corrosion, nitridation and protonolysis for ammonia synthesis

Lithium-mediated nitrogen reduction to ammonia via the catalytic solid–electrolyte interphase

Electrosynthesis of ammonia with high selectivity and high rates via engineering of the solid-electrolyte interphase

(Invited) Lithium-Mediated Ammonia Synthesis at Ambient Conditions

Calcium-mediated nitrogen reduction for electrochemical ammonia synthesis

Towards sustainable metal-mediated ammonia electrosynthesis

Theoretical insight into the mechanism of Li-mediated nitrogen reduction reaction by density functional theory

Beyond lithium for sustainable ammonia synthesis

Copper Particle-Enhanced Lithium-Mediated Synthesis of Green Ammonia from Water and Nitrogen

Electrolyte Formulation By Design of Experiments: The Hidden Correlations in the Li-Mediated Nitrogen Reduction Reaction for Ammonia Production