Abstract:There has been a tendency in oil and gas industry towards the adoption of multilateral wells (MLWs) with completions that incorporate multiple types of flow control devices (FCDs). In this completion technique, passive inflow control devices (ICDs) or autonomous inflow control devices (AICDs) are positioned within the laterals, while interval control valves (ICVs) are installed at lateral junctions to regulate the overall flow from each lateral. While the outcomes observed in real field applications appear promising, the efficacy of this specific downhole completion combination has yet to undergo comparative testing against alternative completion methods that employ a singular flow control device type. Additionally, the design and current evaluations of such completions are predominantly based on analytical tools that overlook dynamic reservoir behavior, long-term production impacts, and the correlation effects among different devices. In this study, we explore the potential of integrating various types of flow control devices within multilateral wells, employing dynamic optimization process using numerical reservoir simulator while the Grey Wolf Optimizer (GWO) is used as optimization algorithm. The Egg benchmark reservoir model is utilized and developed with two dual-lateral wells. These wells serve as the foundation for implementing and testing 22 distinct completion cases considering single-type and multiple types of flow control devices under reactive and proactive management strategies. This comprehensive investigation aims to shed light on the advantages and limitations of these innovative completion methods in optimizing well and reservoir performance. Our findings revealed that the incorporation of multiple types of FCDs in multilateral well completions significantly enhance well performance and can surpass single-type completions including ICDs or AICDs. However, this enhancement depends on the type of the device implemented inside the lateral and the control strategy that is used to control the ICVs at the lateral junctions. The best performance of multiple-type FCD-based completion was achieved through combining AICDs with reactive ICVs which achieved around 75 million USD profit. This represents 42% and 22% increase in the objective function compared to single-type ICDs and AICDs installations, respectively. The optimal settings for ICD and AICD in individual applications may significantly differ from the optimal settings when combined with ICVs. This highlights a strong correlation between the different devices (control variables), proving that using either a common, simplified analytical, or a standard sequential optimization approach that do not explore this inter-dependence between devices would result in sub-optimal solutions in such completion cases. Notably, the ICV-based completion, where only ICVs are installed with lateral completion, demonstrated superior performance, particularly when ICVs are reactively controlled, resulting in an impressive 80 million USD NPV which represents 53% and 30% increase in the objective function compared to single-type ICDs and AICDs installations, respectively.

Impact of Inflow and Outflow Rate Control to Minimize Freshwater Usage: Historical Canadian Steam-Assisted Gravity Drainage Operations versus Numerical Simulations

Performance Analysis of Autonomous Inflow Control Valve in a SAGD Late Life Process with Non-Condensable Gases

Optimization of Steamflooding Heavy Oil Reservoirs

Steam conformance investigation of flow control devices deployed in SAGD injection and production horizontal wells

Numerical Simulation of Gas Mobility Control by Chemical Additives Injection and Foam Generation During Steam Assisted Gravity Drainage (SAGD)

A new pressure control scheme on steam‐assisted gravity drainage for heavy oil production

Study of Novel Steam Assisted Gravity Drainage Multilateral Wells with Dynamic Gridding

Investigation of the effect of surfactant co-injection on steam chamber expansion and oil production in steam-assisted gravity drainage in reservoirs with barrier layers

Practical Approach to Address Pitfalls of High-Resolution Numerical Simulation Modeling in Advanced Completion Design Optimization Today

On the Ratio of Energy Produced to Energy Injected in SAGD: Long-term Consequences of Early Stage Operational Decisions

An integration of the numerical and soft computing approaches for determining inflow control device flow area in water injection wells

Completion Performance Evaluation in Multilateral Wells Incorporating Single and Multiple Types of Flow Control Devices Using Grey Wolf Optimizer

Numerical Thermal Simulation and Optimization of Hybrid CSS/SAGD Process in Long Lake with Lean Zones

Coupling of steam chamber and liquid pool during steam-assisted gravity drainage process in heavy oil reservoirs

Improving Thermal Efficiency and Reducing Emissions with CO2 Injection during Late Stage SAGD Development

An innovative in situ solvent generation enhanced SAGD technique: Mechanism analysis based on numerical simulation

Physical and Numerical Simulations of Steam Drive and Gravity Drainage Using the Confined Bottom Oil–Water Transition Zone to Develop Super Heavy Oil

In-situ solvents generation enhanced steam assisted gravity drainage (ISSG-SAGD): A low carbon and high-efficiency approach for heavy oil recovery

A New Method to Reduce Shale Barrier Effect on SAGD Process: Experimental and Numerical Simulation Studies Using Laboratory-Scale Model

The Impact of Autonomous Inflow Control Valve on Improved Oil Recovery in a Thin-Oil-Rim Reservoir

Study of Heat Transfer by Thermal Expansion of Connate Water Ahead of a Steam Chamber Edge in the Steam-Assisted-gravity-drainage Process