Abstract:_ This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper OTC 35418, “Design Execution and Evaluation of Advanced Completions in Deepwater West Africa,” by Piyush Pankaj, SPE, Matthew S. Jackson, and Lokesh, ExxonMobil, et al. The paper has not been peer reviewed. Copyright 2024 Offshore Technology Conference. _ Deepwater wells offshore West Africa traverse a complicated faulted block with sand bodies that can feature thicknesses of tens of meters. The study described in the complete paper provides insight into designing advanced well completions under various challenging reservoir conditions with autonomous inflow control devices (AICDs) that enable maximizing the producing life of the wells. Introduction The study area for this paper has been a challenging brownfield. Wells have been drilled in difficult deepwater conditions, and the target reservoirs have been lenticular sands with interbedded shale layers. To further complicate production, the sand bodies are poorly consolidated. Openhole wells with standalone screen and gravel packs have become a common approach to address sand control. Water- and gas-injection programs have been used actively in the field during the past 25 years, which further augments production and reservoir management challenges. Water and gas breakthrough in the infill wells has been a major concern for reservoir management. To address the gas buildup in the near-wellbore region and early water production, AICDs have become a popular feature in the lower well-completion designs in high-angled wells that intersect multiple sand bodies along the lateral completion interval. Two case studies are provided in the complete paper; one is included in this synopsis. Flow-Control Technology Although technology that empowers the ability to control the flow of unwanted fluids from zones in the well has been in use since the 1990s, flow-control technology has rapidly evolved, with advancement fueled by the need for long, complex well designs. The two broad categories of these approaches include active and passive flow control. The decision to use inflow-control technologies can be driven by the following economic values: - Balance drawdown along the wellbore - Increase recovery factor and reserves - Improve well cleanup - Reduces risk of erosion or hot-spotting of sandface completion Choice of Inflow Control for West Africa Field of Study Fluidic-diode AICDs were chosen because of their applicability to encountered fluid properties and reservoir conditions and their robustness of design in providing reliable long-term solutions. The reliability is prolonged in such AICDs because they work without any moving parts. Upon changes in viscosity, density, and rate, the fluid flow path will vary to gain the required control of flow rates. This AICD design, with its special geometry, alters the flow path or pattern for preferential fluid restriction. Operational Execution Ultimately, the AICDs were deployed on an inner string. This allowed the standard wire-wrapped screens and gravel pack to function as the traditional sand-control mechanism, while the inner string, deployed inside the lower completion, provides resistance to flow from unwanted gas production.

Performance Analysis of Autonomous Inflow Control Valve in a SAGD Late Life Process with Non-Condensable Gases

Autonomous Inflow Control Valve Multiphase Flow Performance for Light Oil

The Impact of Autonomous Inflow Control Valve on Improved Oil Recovery in a Thin-Oil-Rim Reservoir

The Autonomous Inflow Control Valve Design and Evaluation Criteria Along with Well Performance Review for Multiple Installations Across the Globe

Impact of Inflow and Outflow Rate Control to Minimize Freshwater Usage: Historical Canadian Steam-Assisted Gravity Drainage Operations versus Numerical Simulations

Fieldwide Application of Autonomous Inflow Control Valve in Increasing the Field Recovery in One of the Matured Fields in the Sultanate of Oman: Case Study

Improving Thermal Efficiency and Reducing Emissions with CO2 Injection during Late Stage SAGD Development

Fluidic Diode Autonomous ICD Selection Criteria, Design Methodology, and Performance Analysis for Multiple Completion Designs: Case Studies

Design and Numerical Simulation Study of a Novel AICD for Water Control and Gas Production in Gas Wells

An innovative in situ solvent generation enhanced SAGD technique: Mechanism analysis based on numerical simulation

A new pressure control scheme on steam‐assisted gravity drainage for heavy oil production

An integration of the numerical and soft computing approaches for determining inflow control device flow area in water injection wells

Analysis and experimental study on resistance-increasing behavior of composite high efficiency autonomous inflow control device

A semi-analytical model based on unsteady conductive heat transfer in steam-assisted gravity drainage (SAGD)

In-Depth Understanding of ICD Completion Technology Working Principle

Autonomous Inflow Control Devices Help Maximize Life of Wells in Deepwater West Africa

In-situ solvents generation enhanced steam assisted gravity drainage (ISSG-SAGD): A low carbon and high-efficiency approach for heavy oil recovery

Steam conformance investigation of flow control devices deployed in SAGD injection and production horizontal wells

On the Ratio of Energy Produced to Energy Injected in SAGD: Long-term Consequences of Early Stage Operational Decisions

Multi-stage development process and model of steam chamber for SAGD production in a heavy oil reservoir with an interlayer

Study on Characteristics of Steam Chamber and Factors Influencing Nitrogen-Assisted Vertical–Horizontal Steam Drainage Development