Abstract:Corrosion caused by hydrogen sulfide leads to significant costs for the rehabilitation or replacement of corroded sewer pipes. Conventional methods to prevent sewer corrosion normally involve the dosing of significant amounts of chemicals with the associated transport and storage costs as well as considerable maintenance and control requirement. Recently, a novel chemical free method for sulfide abatement based on electrochemical sulfide oxidation was shown to be highly effective for the removal of sulfide from synthetic and real sewage. Here, we report on the electrochemical removal of sulfide using Ta/Ir and Pt/Ir coated titanium electrodes under simulated sewer conditions during field trials. The results showed that sulfide can successfully be removed to levels below the normal target value at the end of a simulated rising main (i.e. <1mg/L). A coulombic efficiency for dissolved oxygen generation of ≈ 60% was obtained and was independent of the current density. Scaling of the electrode and the membrane was observed in the cathode compartment and as a result the cell potentials increased over time. The cathode potentials returned to their original potential after switching the polarity every two days, but a more frequent switching would be needed to reduce the energy requirements of the system. Accelerated lifetime experiments indicated that a lifetime of 6.0 ± 1.9 years can be expected under polarity switching conditions at a pH of 14 and significantly longer at lower pH values. As operating the system without switching simplifies construction as well as operation, the choice whether to switch or not will in practice depend on operational cost (higher/lower energy) versus capital cost (reactor and peripherals). Irrespective of the approach, our study demonstrates that electrochemical sulfide control in sewer systems may be an attractive new option.

Electrochemical caustic generation from sewage

In-situ caustic generation from sewage: The impact of caustic strength and sewage composition

Electrochemical Removal of Hydrogen Sulfide and Recovery of the Deposited Sulfur on the Anode from Wastewater

Long-term field test of an electrochemical method for sulfide removal from sewage

Electrochemical sulfide removal from synthetic and real domestic wastewater at high current densities

Experimental Study on Volatile Sulfur Compound Inhibition Using a Single-Chamber Membrane-Free Microbial Electrolysis Cell

Insight into the Effective Electrocatalytic Sulfide Removal from Aqueous Solutions Using the Surface Oxidized Stainless-Steel Anode and Its Desulfurization Mechanism

A Novel Microbial Electrolysis Cell (MEC) Reactor for Biological Sulfate-Rich Wastewater Treatment Using Intermittent Supply of Electric Field

Impact of Applied Current on Sulfate-Rich Wastewater Treatment and Microbial Biodiversity in the Cathode Chamber of Microbial Electrolysis Cell (MEC) Reactor

Full-scale investigation of in-situ iron and alkalinity generation for efficient sulfide control

Simultaneous Use of Nitrate and Calcium Peroxide to Control Sulfide and Greenhouse Gas Emission in Sewers

Electrochemical production of HO2- and O2 for sulfide removal from sewage

Remediation of Chromium-Slag Leakage with Electricity Cogeneration Via a Urea-Cr(vi) Cell

Low-voltage Electrochemical Treatment to Precipitate Sulfide During Anaerobic Digestion of Beet Sugar Wastewater.

Electrochemical sulfate production from sulfide-containing wastewaters and integration with electrochemical nitrogen recovery

Electrokinetic removal and recycling of heavy metals from sewage sludge with citric acid complexation

Electrochemical Dechlorination of Municipal Wastewater Effluent

Electrolytic Regeneration of Spent Caustic Soda from CO2 Capture Systems

A Biological Strategy for Sulfide Control in Sewers: Removing Sulfide by Sulfur-Oxidizing Bacteria.

Electrochemical processes for simultaneous sulfur and energy recoveries from sulfide-containing wastewater

Reducing sulfide and methane production in gravity sewer sediments through urine separation, collection and intermittent dosing