Abstract:Water electrolyzers, such as proton exchange membrane water electrolyzers (PEM) and anion exchange membrane water electrolyzers (AEM) are important technologies for sustainable electrochemical energy conversion. The oxygen evolution reaction (OER) at the anode is a pivotal half-reaction in these systems. Despite substantial progress over the years, OER kinetics remain a major source of inefficiency in these devices, necessitating the development of stable catalysts. Currently, precious metal-based catalysts dominate the landscape of OER catalysts for these devices. As non-precious alternatives, nickel-iron (Ni/Fe) catalysts have emerged as particularly promising in alkaline conditions. However, they exhibit dynamic behavior during electrocatalysis—for instance, oxidizing to an active oxyhydroxide phase during the OER. This dynamic nature makes it challenging to establish clear structure-activity-stability relationships. Incorporating cobalt (Co) into the catalyst composition has been found to influence the activity and material conversion of mixed Ni-Fe-Co oxides and (oxy)hydroxides. Methods for rationally activating and stabilizing Ni-Fe-based catalysts via electrochemical and chemical (e.g. composition) routes are necessary for enhancing scalability and accessibility in hydrogen production devices. Herein, our goal is to understand and exploit activation protocols to enhance the OER performance of as-synthesized nickel-iron-cobalt metal thin films, addressing three primary objectives: synthesizing and characterizing homogeneous metal catalysts, investigating the impact of different potential ranges and scan rates on catalyst oxidation and surface conversion from the metal, and assessing how the addition of cobalt influences conversion rates and current density of the catalyst. We use cyclic voltammetry to facilitate and disentangle conversion (integrated reductive peak for Ni and/or Co 2+ → 3+ transition) and OER performance (current density (mA cm -2 ) at η = 350 mV). For all compositions tested of (Ni 80 Fe 20 ) 100-x Co x , x = 0 - 5 % we observe that the most effective conversion requires both redox and oxygen evolution. To further investigate the relationship between conversion and performance catalysts were tested in varying electrolytes such as 1M KOH, 0.1M KOH, and an ionomer overlayer to understand how these impacted conversion. Subsequently, post-analysis techniques such as X-ray photoelectron spectroscopy (XPS) and inductively coupled plasma mass spectrometry optical emission spectroscopy (ICP-OES) were conducted to gain insights into the surface composition and elemental distribution of the catalysts following potential cycling. Additionally, electrochemical mass spectrometry (EC-MS) was employed to quantify the faradaic efficiency of oxygen, providing an understanding of at what point the catalyst begins converting and how much of the OER current is directed towards OER versus metal conversion. This project advances the fundamental understanding of NiFeCo catalyst conversion, shedding light on the critical role of catalyst composition and investigating the conditions that foster optimal conversion efficiency. The use of physical vapor deposition for thin film catalysts offers distinct advantages, making deposition and scaling processes facile. This capability, coupled with the gained insights into conversion dynamics, sets the stage for in situ optimization of the surface to achieve the active oxyhydroxide phase with the highest performance for AEM water electrolysis.

High‐throughput screening of Co‐Fe‐Ni electrocatalysts for high‐current‐density water electrolysis

High throughput screening driven discovery of Mn5Co10Fe30Ni55Ox as electrocatalyst for water oxidation and electrospinning synthesis

In Situ Electrochemical Activation of a Codoped Heterogeneous System as a Highly Efficient Catalyst for the Oxygen Evolution Reaction in Alkaline Water Electrolysis

Fabrication of NiCo@Ni3S2/Nickel foam electrocatalyst with ultrathin NiCo layered double hydroxide film wrapping Ni3S2 nanoarrays for efficient oxygen evolution reaction

Confined growth of Ultrathin, nanometer-sized FeOOH/CoP heterojunction nanosheet arrays as efficient self-supported electrode for oxygen evolution reaction

Construction of an Electrode with Hierarchical Three-Dimensional NiFe-oxyhydroxides by Two-Step Electrodeposition for Large-Current Oxygen Evolution Reaction

Optimizing the Synergistic Effect of Co and Fe for Efficient and Durable Oxygen Evolution under Alkaline Conditions

In Situ Formation of Nano Ni–Co Oxyhydroxide Enables Water Oxidation Electrocatalysts Durable at High Current Densities

Rapidly Catalysis of Oxygen Evolution Through Sequential Engineering of Vertically Layered FeNi Structure

Composition-Dependent Dynamics of Nickel-Iron-Cobalt Metal Catalysts for Oxygen Evolution Reaction

Synergistic Assembly of a CoS@NiFe/Ni Foam Heterostructure Electrocatalyst for Efficient Water Oxidation Catalysis at Large Current Densities

Development of a CoFe2O4-MnO Electrocatalyst for an Improved Oxygen Evolution Process in Alkaline Media

Active-sites-enriched dendritic crystal Co/Fe-doped Ni3S2 electrocatalyst for efficient oxygen evolution reaction

A strongly coupled 3D ternary Fe2O3@Ni2P/Ni(PO3)2 hybrid for enhanced electrocatalytic oxygen evolution at ultra-high current densities

Development of Ni–Fe Based Ternary Metal Hydroxides As Highly Efficient Oxygen Evolution Catalysts in AEM Water Electrolysis for Hydrogen Production

Ni3Se4/Fe(PO3)2/NF Composites as High-Efficiency Electrocatalysts with a Low Overpotential Toward Oxygen Evolution Reaction

Rational construction of uniform CoS/NiFe2O4 heterostructure as efficient bifunctional electrocatalysts for hydrogen evolution and oxygen evolution reactions

Strongly coupling of amorphous/crystalline reduced FeOOH/α-Ni(OH)2 heterostructure for extremely efficient water oxidation at ultra-high current density

Rapid fabrication of NiFe(OH)x/Fe0.2Co-Se complexes for oxygen evolution reaction electrocatalysis

Highly durable FeNiS x /NiFe(OH) x electrocatalyst for selective oxygen evolution reaction in alkaline simulated seawater at high current densities

Mesoporous Ni60Fe30Mn10-alloy based metal/metal oxide composite thick films as highly active and robust oxygen evolution catalysts †