Abstract:A synthesis method of N th-order wideband bandpass filter (BPF) with cross-coupled or inline topology using inductive-and capacitive-coupling components is presented. The synthesized admittance matrix can fully represent the frequency-dependent characteristics of the J-inverters and resonators that are used to implement the wideband BPF. All negative inductive-coupling elements in the trisection, quadruplet, or conjoined trisection blocks can be transformed into negative capacitive-coupling elements by using the proposed similarity transformation matrix and the corresponding transformation conditions. As a consequence, the resulted admittance matrix can be directly implemented using lumped elements. All values of the lumped elements can be calculated without any optimization. The transformation method of cascaded blocks filter with trisection, quadruplet, and two conjoined trisections is demonstrated through several numerical examples. The fundamental transformation of third-order and fourth-order cross coupled or inline topologies is proposed first. Cascaded block synthesis for higher order wideband BPF with multiple transmission zeros (TZs) is then carried out based on the proposed fundamental transformation. The proposed synthesis method can be applied to N th-order wideband BPF with multiple TZs. To validate the proposed method, a fifth-order cascaded triplets (CTs) filter with fractional bandwidth (FBW) of 66.7%, one TZ at the lower stopband, and two TZs at the upper band are synthesized, designed, and fabricated.

Precise Design of an 11-Pole TM 010 Mode Dielectric Resonator BPF with Novel Capacitive Coupling Structures

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

Novel circular dual-mode filter with both capacitive and inductive source-load coupling for multiple transmission zeros

DUAL-MODE BPF WITH FOUR TRANSMISSION ZEROS USING S-L COUPLING STRUCTURE WITH QUADRATIC FUNCTION COUPLING COEFFICIENT

Miniaturized Two-Pole Lumped BPF with Four Controllable TZs Using Multiple Coupling Paths

High-Selectivity Balanced Bandpass Filter with Mixed Electric and Magnetic Coupling

A tri-mode bandpass filter using capacitive and inductive source-load coupling

Design of Miniaturized and Highly Selective On-Chip BPFs with Mixed-Coupled Resonators

Design of Quad-Band HTS Bandpass Filter Using Quadruple-Mode Square Ring Loaded Resonator

Compact Quad-Mode BPF Based on Half-Mode Short-Circuited Semicircular Patch Resonator

Balanced Tri-Band Bandpass Filter Using Sext-Mode Stepped-Impedance Square Ring Loaded Resonators.

A Three-Pole Substrate Integrated Waveguide Bandpass Filter Using New Coupling Scheme

Synthesis of Wideband Bandpass Filter With Cross-Coupled or Inline Topology for Direct Circuit Implementation Using Lumped Elements

Individually Controllable Dual-Band Bandpass Filter with Multiple Transmission Zeros and Wide Stopband

High-Selectivity Bandpass Filter Based on Two Merged Ring Resonators

Novel Cross-Coupled Dual-Band Bandpass Filters With Compact Size Based on Dual-Mode Isosceles Right-Angled Triangular Resonators

A Compact Dual‐band Superconducting Filter with Fine‐tuning Coupling Structure

Coupled‐line Band‐pass Filter with T‐shaped Structure for High Frequency Selectivity and Stopband Rejection

Compact Bandpass Filter with High Selectivity Using Quarter-Mode Substrate Integrated Waveguide and Coplanar Waveguide