Abstract:first_page Download PDF settings Order Article Reprints Font Type: Arial Georgia Verdana Font Size: Aa Aa Aa Line Spacing:    Column Width:    Background: Open Access Editorial Advances in Additive Manufacturing and Their Applications by Petru Berce Petru Berce Scilit Preprints.org Google Scholar View Publications Manufacturing Engineering Department, Technical University of Cluj Napoca, 400641 Cluj-Napoca, Romania Metals 2024 , 14 (2), 165; https://doi.org/10.3390/met14020165 (registering DOI) Submission received: 12 January 2024 / Accepted: 24 January 2024 / Published: 29 January 2024 (This article belongs to the Special Issue Advances in Additive Manufacturing and Their Applications) Download keyboard_arrow_down Download PDF Download XML Versions Notes 1. Introduction and Scope Additive manufacturing (AM) has evolved rapidly in the last few years. It has been embraced by major industrial companies looking for ways to improve their products. The ability to deliver near-instant part production and fully custom designs that cannot be replicated with other manufacturing techniques has accelerated investment and research in additive manufacturing.A number of different metals are now available in powdered form to suit exact processes and requirements. Stainless steel and titanium metal and its alloys are materials of interest in the fields of biomedicine [1], aerospace [2], and defense [3] and the automobile industry [4]. Other materials such as aluminum alloys [5], copper [6], and cobalt chrome, in addition to precious metals such as gold, platinum, palladium, and silver [7], are available in powdered form as raw materials in AM technologies. Many studies in this field have been and are oriented toward the following: (a) Structural optimization for AM is and will remain a hot and attractive issue. Moreover, further studies need to be carried out to optimize and design practical industrial structures [8,9]; (b) The interaction between building orientation and heat treatment may change the strength–stiffness behavior of steel manufactured by means of powder bed fusion (PBF) [10]; (c) Supports are optimized with respect to two different physical properties. First, they must support the overhanging regions of the structure to improve the stiffness of the supported structure during the building process. Second, support can help in channeling the heat flux produced by the source term (typically a laser beam), thus improving the cooling down of the structure during the fabrication process [11]. This Special Issue aims to present the latest developments in additive manufacturing processes, optimizations, new additive processes, rapid tooling, and applications from industry using metal powders as raw materials. 2. Contributions This Special Issue contains a total of 10 articles covering the main topics in this field.The goal of the study by Ayub H. et al. (Contribution 1) was to increase the laser power absorption capacity of copper powder through the inclusion of carbon nanotubes (CNTs), up to a maximum of 0.6 wt.%. The optical properties of the CNTs mixed with copper powder were examined through spectroscopy, which revealed that the IR laser reflectance of the copper powder was reduced by 8%. The results demonstrated that the addition of CNTs improved the sintering behavior and refined the grain structure, leading to an increase in strength and flexibility. The SEM analysis revealed that lower concentrations of CNTs and higher levels of laser power could cause residual porosity, while higher CNT concentrations and slower scan speeds led to better parti -Abstract Truncated-

Special issue: additive manufacturing applied to adhesive bonding

Mechanical strength of adhesively bonded joints using polymeric additive manufacturing

Editorial for the Special Issue on Laser Additive Manufacturing: Design, Processes, Materials and Applications

Editorial for the Special Issue on Laser Additive Manufacturing: Design, Materials, Processes, and Applications, 2nd Edition

Advances in Adhesive Bonded Joints for Composite Materials: A Comprehensive Review

Adhesively bonded joints – A review on design, manufacturing, experiments, modeling and challenges

Mechanical Strength of Additive Manufactured and Standard Polymeric Components Joined Through Structural Adhesives

Additive Manufacturing Technologies: An Overview about 3D Printing Methods and Future Prospects

Additive Manufacturing: A Comprehensive Review

Adhesive bonding of similar/dissimilar three-dimensional printed parts (ABS/PLA) considering joint design, surface treatments, and adhesive types

An overview of manufacturing functionally graded adhesives – Challenges and prospects

Developments in Laminate Modification of Adhesively Bonded Composite Joints

A review on recent advancements in additive manufacturing techniques

Characterization Methods for Additive Manufacturing

Advances in Additive Manufacturing and Their Applications

Additive manufacturing technology: the status, applications, and prospects

The Metallurgy of Additive Manufacturing: Potentials and Challenges towards Industrialisation

A Review of Structural Adhesive Joints in Hybrid Joining Processes

Additive Manufacturing of Biomaterials, Tissues, and Organs

Multiaxial stress effects on bonding strength in adhesively bonded joints

3D printing of biomedical materials and devices