Abstract:Hybrid joints combining pre-tensioned bolts and adhesive bonding have been shown to have the potential to increase joint loading capacity for steel structures. In this paper, experimental and numerical research on hybrid joints has been reviewed with a focus on load transfer mechanisms. However, there is still no clear consensus on whether hybrid joints are an extension of a pre-tensioned bolted connection with an increased friction coefficient or adhesively bonded ones. This is due to the complexity of hybrid joints, which require knowledge from two different fields of engineering and can result in incomplete characterisation of adhesives and documentation of manufacturing and testing large-scale samples. The first part of the review paper discusses the experimental evidence gathered on small-scale samples (Napkin and off-axis tests), although not strictly resulting from observations directly made on hybrid joints. The authors that studied the σ - τ –interaction on both tensile and compressive normal stresses provided evidence of a clear distinction to be made between tensile and compressive normal stresses. For tensile normal stresses, there is a clear lower limit below which no shear strength exists, while compressive stresses significantly increase shear strength. However, there is no clear consensus regarding the exact nature of the interaction between compressive normal stresses and shear strength. Some authors assume a linear relationship involving some cohesive strength, while others identified bi-linear or more complex relationships. Adhesives do not exhibit any noteworthy differences in the friction coefficient, and differences related to the failure mode were identified: cohesive failure is likely driven by the intrinsic strength of the adhesive, while adhesive failure can be modelled as a classic friction problem. Relating the aforesaid to the adhesive, or specific properties thereof, proved difficult, as most of the studies do not provide sufficient information. Additional complexity arises if tests are carried out on galvanised or coated surfaces, in which case the performance of the adhesive may be subordinated to that of the specific steel surface. Overall, the review paper provides valuable insights into the load transfer mechanisms of hybrid joints, but further research is necessary to fully understand their behaviour and to optimise their design for use in steel structures.

Adhesively bonded joints – A review on design, manufacturing, experiments, modeling and challenges

Advances in Adhesive Bonded Joints for Composite Materials: A Comprehensive Review

Analytical Solution for Externally Bonded Joints Considering Snap-Back

Enhancing Fatigue Life and Strength of Adhesively Bonded Composite Joints: A Comprehensive Review

A Review of Structural Adhesive Joints in Hybrid Joining Processes

Machine learning/finite element analysis - A collaborative approach for predicting the axial impact response of adhesively bonded joints with unique sandwich composite adherends

A review of joining techniques for thermoplastic composite materials

Hybrid joints consisting of pre-tensioned bolts and a bonded connection—A comprehensive review part I: Local approach

Long‐term performance of single‐lap joints: Review, challenges and prospects in civil engineering

A detailed experimental parametric analysis of bolted and hybrid bolted/bonded composite joints

Interfacial Fracture Mechanical Aspects of Adhesive Bonded Joints—A Review

Numerical analysis of hybrid (bonded/bolted) FRP composite joints: A review

Influence of 3D printed adherend design on structural performance and vibrational behaviour of adhesively bonded joints

Effects of adherend notching on the bonding performance of composite single-lap joints

A review of modification methods, joints and self-healing methods of adhesive for aerospace

Material and adhesive effect in adhesively-bonded composite stepped-lap joints

EXPERIMENTAL INVESTIGATION ON ADHESIVE BONDED JOINTS OF CARBON FIBER COMPOSITE LAMINATES CONTAINING DISBOND DEFECT

Numerical and experimental investigation on the load‐bearing performance of plain‐woven composites hybrid bonded‐bolted joints

Mechanical behavior investigation of fused deposition modeling joints by using different bonding geometry with variable adhesive thickness

Mechanical properties of all-C/C composite hybrid bonded/bolted joints

Study on mechanical behavior of adhesively bonded laminated envelope composite joints