Abstract:Fe–N–C catalysts exhibit promising activity toward the catalytic oxygen reduction reaction (ORR). However, applicability of such catalysts is limited by serious oxidative corrosion via the Fenton reaction. In this feature work, we prepared manganese–nitrogen species by pyrolyzing a bimetal CdMn and P-phenylenediamine organic complex (CdMn–PPD) under different atmospheres for the first time. The experimental results suggest that the carbonized atmosphere deeply affects the graphitization degree, pore structure of carbon, and the formation of Mn–N active sites. Of the three prepared catalysts, –NH3 exhibited the greatest Mn–N and pyridinic N content and delivered excellent ORR activity (Eonset: 0.95 V, E1/2: 0.83 V). Even more impressive, the Fenton reaction was substantially restrained by this catalyst. Overall, the –NH3 offers superior stability to that of Fe–N–C catalysts, providing new insight for further explorations of excellent non-noble metal ORR catalysts.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c04082?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c04082</a>.TEM images of CdMn–PPD, HRTEM images of the –N2, –H2, and –NH3, C 1s XPS spectra of CdMn–PPD, –N2, –H2, and –NH3, percentage of pyridinic N, pyrrolic N, graphitic N, and Mn–N of as-prepared samples, N 1s XPS spectra of Co–N–C–NH3, Co–N–C–H2, and Co–N–C–N2, XRD patterns of –N2, –H2, and –NH3, XPS spectra of Cd 3d for –NH3, weight loss of –N2, –H2, and –NH3 by thermal gravimetric analysis under air conditions, Raman patterns of –N2, –H2, and –NH3, N2 sorption isotherms at 77 K of –N2, –H2, and –NH3, pore size distributions of –N2, –H2, and –NH3, LSV curves of NPC and –NH3 at an RDE rotation speed of 1600 rpm, current–time (i–t) curves of –NH3 and Pt/C at 0.7 V with an addition of 2 M methanol, RDE polarization curves of –NH3 before and after 10000 cycles of accelerated durability testing, photographs showing the color change of the solution after Fenton reaction, UV–vis absorption spectra of 0.5 M H2SO4 solutions include ATBS, H2O2, and the catalyst, polarization curves of –NH3 at an RDE rotation speed of 1600 rpm with a scan rate of 10 mV s–1 in 1 M KOH solution and Tafel plots of –NH3, charge/discharge profiles of rechargeable zinc–air batteries using –N2 and –H2 as the air electrodes at 5 mA cm–2 under ambient conditions (10 min each for charge/discharge), and comparison of ORR catalytic performances between –NH3 and the catalysts in the literature (0.1 M KOH, 1600 rpm) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c04082/suppl_file/sc0c04082_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Manganese-Based Non-Precious Metal Catalyst for Oxygen Reduction in Acidic Media

Manganese Oxide-Induced Strategy to High-Performance Iron/nitrogen/carbon Electrocatalysts with Highly Exposed Active Sites.

MnO 2 nanoparticles supported on graphitic carbon nitride as an electrocatalyst for oxygen reduction and evolution

Manganese Doped-Nitrogenated Carbon as an Efficient Catalyst for Acidic Electrocatalytic Reduction of CO2

A Facile and Low-Cost Synthesis of MnOx/Mn2N-N-C Nanohybrid As an Advanced Oxygen Reduction Electrocatalyst

Nanocrystal Supracrystal-Derived Atomically Dispersed Mn-Fe Catalysts with Enhanced Oxygen Reduction Activity

Mn atomic clusters and Fe nanoparticles in-situ confined nitrogen carbon nanotubes for efficient and durable ORR electrocatalysts in both alkaline and acidic media

Mesoporous Metal-Nitrogen-Doped Carbon Electrocatalysts for Highly Efficient Oxygen Reduction Reaction

Xerogel-Derived Manganese Oxide/N-Doped Carbon as a Non-Precious Metal-Based Oxygen Reduction Reaction Catalyst in Microbial Fuel Cells for Energy Conversion Applications

Manganese Oxide/Iron Carbide Encapsulated in Nitrogen and Boron Codoped Carbon Nanowire Networks as Accelerated Alkaline Hydrogen Evolution and Oxygen Reduction Bifunctional Electrocatalysts

Manganese–polypyrrole–carbon Nanotube, a New Oxygen Reduction Catalyst for Air-Cathode Microbial Fuel Cells

Electrochemical Oxygen Reduction Reaction Performance Boosted by N, P Doped Carbon Layer over Manganese Dioxide Nanorod

Well-Coupled Nanohybrids Obtained by Component-Controlled Synthesis and in Situ Integration of Mn Xpd Y Nanocrystals on Vulcan Carbon for Electrocatalytic Oxygen Reduction.

CdMn Bimetallic Complex-Derived Manganese–Nitrogen Species as Electrocatalysts for an Oxygen Reduction Reaction

Electrospinning Synthesis of Carbon-Supported Pt3Mn Intermetallic Nanocrystals and Electrocatalytic Performance towards Oxygen Reduction Reaction

Nitrogen-coordinated single-atom catalysts with manganese and cobalt sites for acidic oxygen reduction

Highly Active Carbon/alpha-MnO2 Hybrid Oxygen Reduction Reaction Electrocatalysts

Engineering the electronic structure of isolated manganese sites to improve the oxygen reduction, Zn-air battery and fuel cell performances

Polyaniline/β-MnO2 nanocomposites as cathode electrocatalyst for oxygen reduction reaction in microbial fuel cells

Carbon-Free, Binder-Free MnO2@Mn Catalyst for Oxygen Reduction Reaction.

Restructured Fe−Mn Alloys Encapsulated by N‐doped Carbon Nanotube Catalysts Derived from Bimetallic MOF for Enhanced Oxygen Reduction Reaction