Abstract:Background: Biomass usage for energy purposes has emerged in response to global energy demands and environmental problems. The large amounts of by-products generated during logging are rarely utilized. In addition, some species (e.g., Quercus spp.) are considered less valuable and are left in the cutting areas. Production of pellets from this alternative source of biomass may be possible for power generation. Although the pellets may be of lower quality than other types of wood pellets, because of their physical and technological properties, the addition of different raw materials may improve the characteristics of the oak pellets. Methods: Sawdust from the oak species Quercus sideroxyla, Q. rugosa, Q. laeta and Q. conzattii was mixed with sawdust from the pine Pinus durangensis in different ratios of oak to pine (100:0, 80:20, 60:40, 40:60 and 20:80). Physical and mechanical properties of the pellets were determined, and calorific value tests were carried out. For each variable, Kolmogorov-Smirnov normality and Kruskal-Wallis tests were performed and Pearson's correlation coefficients were determined (considering a significance level of p < 0.05). Results: The moisture content and fixed carbon content differed significantly (p < 0.05) between the groups of pellets (i.e., pellets made with different sawdust mixtures). The moisture content of all pellets was less than 10%. However, volatile matter and ash content did not differ significantly between groups (p ≥ 0.05). The ash content was less than 0.7% in all mixtures. The addition of P. durangensis sawdust to the mixtures improved the bulk density of the pellets by 18%. Significant differences (p < 0.05) in particle density were observed between species, mixtures and for the species × mixture interaction. The particle density was highest in the 80:20 and 60:40 mixtures, with values ranging from 1,245 to 1,349 kg m-3. Bulk density and particle density of the pellets were positively correlated with the amount of P. durangensis sawdust included. The mechanical hardness and impact resistance index (IRI) differed significantly (p < 0.05) between groups. The addition of pine sawdust decreased the mechanical hardness of the pellets, up to 24%. The IRI was highest (138) in the Q. sideroxyla pellets (100:0). The mechanical hardness and IRI of the pellets were negatively correlated with the amount of P. durangensis sawdust added. The bulk density of the pellets was negatively correlated with mechanical hardness and IRI. The calorific value of mixtures and the species × mixture interaction differed significantly between groups. Finally, the mean calorific value was highest (19.8 MJ kg-1) in the 20:80 mixture. The calorific value was positively related to the addition of P. durangensis sawdust.

Pellets from mixtures of short rotation coppice with forest-derived biomass: Production costs and energy intensity

Short rotation woody crops and forest biomass sawdust mixture pellet quality

Eco-Efficiency of Pellet Production from Dedicated Poplar Plantations

Evaluation of Agricultural Residues as Organic Green Energy Source Based on Seabuckthorn, Blackberry, and Straw Blends

Multiscale analysis for the valorization of biomass via pellets production towards energy security

Characterizing value-added pellets obtained from blends of miscanthus, corn stover, and switchgrass

Energy usage of spruce with waste face masks and spent coffee grounds as fuel in a pellet boiler

Densification of Wood—Influence on Mechanical and Chemical Properties when 11 Naturally Occurring Substances in Wood Are Mixed with Beech and Pine

Variability in Physical Properties of Logging and Sawmill Residues for Making Wood Pellets

Improving the physical, mechanical and energetic properties of Quercus spp. wood pellets by adding pine sawdust

Pellet Production from Woody and Non-Woody Feedstocks: A Review on Biomass Quality Evaluation

Life Cycle Assessment of Biomass Chains: Wood Pellet from Short Rotation Coppice Using Data Measured on a Real Plant

Pellet production from furfural residue and sawdust: Evaluating the characteristics and quality of pellets and their dependency on process parameters

Willow, Poplar, and Black Locust Debarked Wood as Feedstock for Energy and Other Purposes

Pelleting of Pine and Switchgrass Blends: Effect of Process Variables and Blend Ratio on the Pellet Quality and Energy Consumption

Reductions in Emissions of Carbonaceous Particulate Matter and Polycyclic Aromatic Hydrocarbons from Combustion of Biomass Pellets in Comparison with Raw Fuel Burning.

Fuel Wood Pellets Produced from Sawdust of Scots Pine Mature and Juvenile Wood: Self-Heating and Off-Gassing Tests at Industrial Scale

Integrated torrefaction-extrusion system for solid fuel pellet production from mixed fiber-plastic wastes: Techno-economic analysis and life cycle assessment

Characterization and quality analysis of biomass pellets prepared from furfural residue, sawdust, corn stalk and sewage sludge

Cypress Wood and Bark Residues Chemical Characterization and Utilization as Fuel Pellets Feedstock

Recent development in production of pellet fuels from biomass and polyethylene (PE) wastes