Abstract:Background: Biomass usage for energy purposes has emerged in response to global energy demands and environmental problems. The large amounts of by-products generated during logging are rarely utilized. In addition, some species (e.g., Quercus spp.) are considered less valuable and are left in the cutting areas. Production of pellets from this alternative source of biomass may be possible for power generation. Although the pellets may be of lower quality than other types of wood pellets, because of their physical and technological properties, the addition of different raw materials may improve the characteristics of the oak pellets. Methods: Sawdust from the oak species Quercus sideroxyla, Q. rugosa, Q. laeta and Q. conzattii was mixed with sawdust from the pine Pinus durangensis in different ratios of oak to pine (100:0, 80:20, 60:40, 40:60 and 20:80). Physical and mechanical properties of the pellets were determined, and calorific value tests were carried out. For each variable, Kolmogorov-Smirnov normality and Kruskal-Wallis tests were performed and Pearson's correlation coefficients were determined (considering a significance level of p < 0.05). Results: The moisture content and fixed carbon content differed significantly (p < 0.05) between the groups of pellets (i.e., pellets made with different sawdust mixtures). The moisture content of all pellets was less than 10%. However, volatile matter and ash content did not differ significantly between groups (p ≥ 0.05). The ash content was less than 0.7% in all mixtures. The addition of P. durangensis sawdust to the mixtures improved the bulk density of the pellets by 18%. Significant differences (p < 0.05) in particle density were observed between species, mixtures and for the species × mixture interaction. The particle density was highest in the 80:20 and 60:40 mixtures, with values ranging from 1,245 to 1,349 kg m-3. Bulk density and particle density of the pellets were positively correlated with the amount of P. durangensis sawdust included. The mechanical hardness and impact resistance index (IRI) differed significantly (p < 0.05) between groups. The addition of pine sawdust decreased the mechanical hardness of the pellets, up to 24%. The IRI was highest (138) in the Q. sideroxyla pellets (100:0). The mechanical hardness and IRI of the pellets were negatively correlated with the amount of P. durangensis sawdust added. The bulk density of the pellets was negatively correlated with mechanical hardness and IRI. The calorific value of mixtures and the species × mixture interaction differed significantly between groups. Finally, the mean calorific value was highest (19.8 MJ kg-1) in the 20:80 mixture. The calorific value was positively related to the addition of P. durangensis sawdust.

Cypress Wood and Bark Residues Chemical Characterization and Utilization as Fuel Pellets Feedstock

Short rotation woody crops and forest biomass sawdust mixture pellet quality

An integrated characterization of Picea abies industrial bark regarding chemical composition, thermal properties and polar extracts activity

Forest by-Product Valorization: Pilot-Scale Pinus radiata and Eucalyptus globulus Bark Mixture Extraction

Co-pyrolysis of plastic waste and eucalyptus waste wood for fuel pellets production: A study of fuel, mechanical, and combustion characteristics under varying binder proportion

Improving the physical, mechanical and energetic properties of Quercus spp. wood pellets by adding pine sawdust

Characterizing biomass pellets produced from torrefied biowaste and waste medical plastic pyrolysis oil

Densification of Wood—Influence on Mechanical and Chemical Properties when 11 Naturally Occurring Substances in Wood Are Mixed with Beech and Pine

Assessment of Quality Indicators of Pressed Biofuel Produced from Coarse Herbaceous Plants and Determination of the Influence of Moisture on the Properties of Pellets

Valorization of spent coffee ground by mixing with various types of residual biomass for pellet production: evaluation of solid biofuel properties at different mixtures

Energy usage of spruce with waste face masks and spent coffee grounds as fuel in a pellet boiler

Characterization and quality analysis of biomass pellets prepared from furfural residue, sawdust, corn stalk and sewage sludge

Variability in Physical Properties of Logging and Sawmill Residues for Making Wood Pellets

Valorization of Uruguayan Pinus elliottii Bark by Developing Sustainable Adhesives

Technical Feasibility Study of Orange Wood Residues (Citrus sinensis) for Bioenergy Generation

Combustion of Biomass Based Pellets With Pyrolysis Bio-Oils

Torrefaction and Densification of Wood Sawdust for Bioenergy Applications

Development of an efficient method to blend forest biomass with agricultural residue to produce fuel pellets with improved mechanical properties

Forest residues as renewable resources for bio-based polymeric materials and bioenergy: chemical composition, structure and thermal properties

Characterizing value-added pellets obtained from blends of miscanthus, corn stover, and switchgrass

Characterization of binderless fuel pellets from macrophyte Azolla blended with forestry biowaste