Warm-mix asphalt state of the art and best practices

M. R. Murphy

Abstract:Warm-mix asphalt (WMA), an up and coming technology in the pavement industry, permits the lowering of production and placement temperatures by 35°F to 100°F less than traditional hot-mix asphalt (HMA). The reduction in temperature provides various benefits such as decreased fuel consumption, improved compaction, extended paving seasons, longer haul distances, incorporation of greater percentages of recycled asphalt pavement (RAP), improved working conditions, and a reduction in the production of greenhouse gases. Since the late 1980s when the National Asphalt Pavement Association (NAPA) partnered with the EPA to study air emissions, which included greenhouse gases, from asphalt plants and the primary introduction of WMA in the United States in 2002, there has been increased focus placed on the environment. In addition to the above benefits, research has shown that lowering the production temperature of warm-mix asphalt can lead to a significant reduction in the production of emissions. Multiple technologies have been developed to allow asphalt mixtures to be placed at significantly lower temperatures. These technologies can be classified in many different ways either by temperature reduction, technologies that use water, technologies that use either an organic additive or wax, those that use chemical additives or surfactants. Material testing is important for WMA just as it is for HMA. The Warm Mix Technical Working Group recommends two forms of testing for WMA: laboratory testing and field testing. These tests determine moisture content, specific gravity, tensile strength ratio, compaction, temperature cracking, fatigue life, density, bond strength, smoothness, and indirect tensile strength in addition to other testing techniques. Current standards and specifications for WMA are being developed by states. The common practice presently is for WMA to meet the specifications and requirements of HMA. However, some states have already developed WMA specifications for the specific state. The Warm Mix Technical Working Group is working to determine a generic specification that may be implemented by government agencies. Best practices are critical to the production and placement of warm-mix asphalt. These practices which include reduction of moisture content in stockpiles, burner adjustment to ensure complete fuel combustion, drying of aggregate and maintaining sufficient baghouse temperatures, and changes in placement are crucial to saving energy and the reduction of emissions. Because warm-mix asphalt is a relatively new technology in the United States, research is needed. The industry, academia, and various agencies have made great strides in the area of warm-mix asphalt technology; however, additional research in mix design is crucial to the success of WMA. In addition to mix design, additional research is needed in the collection of data to determine the long-term performance of WMA specifically in the areas of rutting and moisture damage. Additional research in the area of the development of a product approval…

Materials Science,Environmental Science,Engineering