Abstract:Overhead ground wire (OGW) is erected to protect transmission conductors from lightning strikes. However, OGW can be damaged or even ruptured due to lightning strikes, which threatens the stable operation of the power system. Thus, it is necessary to study the lightning-induced damage or rupture mechanism to provide a theoretical guidance for the structure optimization or selection criteria improvement for OGW. In this paper, an OGW rupture accident due to lightning arc root movement under multiple return strokes was analyzed. Firstly, based on the evidence at the accident scene and the damage characteristics of the sample, it was preliminarily inferred that multiple lightning strike points caused the rupture of OGW in the accident. An analytical model simulating the lightning arc root movement was established to prove the existence of lightning arc root movement phenomenon in the accident. In addition, the thermal ablation model of OGW was also established according to the existing numerical methods. The differences between OGW damage results of model and sample were compared. The results of this paper showed that the sliding movement and jumping movement of the lightning arc root caused the long axial ablation length and multiple lightning strike points of OGW in the accident, respectively. Existing numerical methods as well as the laboratory generated lightning strikes experiments did not accurately calculate the thermal ablation damage of OGW caused by the natural lightning strikes. For this accident sample, at least 66% injected lightning energy is not considered when simulating the physical process of the natural lightning striking OGW. Based on the research result, simulation test of lightning strike should be considered before OGW is put into operation. Moreover, for the existing simulation test method of lightning strike, the injected lightning energy should also be increased.

Electrothermal damage numerical analysis for overhead ground wire at terminal of armor rods under short-circuit current

Experimental Study of Protection Measures for Preventing 10 KV Insulated Conductors from Breakage Caused by Lightning Stroke

Corrosion-Fatigue Analysis of Wires in Bridge Cables Considering Time-Dependent Electrochemical Corrosion Process

Experimental Analysis on Temperature Distribution of Ground Wire Suspension String with Winding Preformed Armor Rod

Experimental and Numerical Analysis of Damage Characteristics to Opgw Strands under First Lightning Strike and Continuous Current

Assessment of lightning damage of OGW by comparing natural effects and the common Joule heat & arc heat model application

Analytical Investigation of Lightning Strike-Induced Damage of OPGWs Based on a Coupled Arc-Electrical-Thermal Simulation

Experimental Investigation on the Breakage in Earth Wire Suspension String with Winding Preformed Armor Rods

Finite Element Analysis of Temperature Field of Main Circuit in Low Voltage Apparatus

Simulation and Analysis of Lightning Overvoltage of 10 kV Cable on the Bridge of High-speed Railroad

Modeling and Simulation of Arc and Contact Wire Molten Pool Behavior During Pantograph Lowering Process

Exceeding 50% injected lightning energy not sourced: During the analysis of an OGW rupture accident caused by multiple lightning strikes

Electric-Thermal Field Analysis for EPR On-Board Cable Terminal Using Stress Tube Modified by ZnO Nonlinear Material

Study on Thermal Circuit Model of Typical Disconnector and Current Transformer

An Equivalent Heat Transfer Model Instead of Wind Speed Measuring for Dynamic Thermal Rating of Transmission Lines

Analysis of Influence Factors on AC Breakdown Characteristics of Rod-Barrier Gap and Electric Field Simulation

Damage Characteristics of OPGWs under Consecutive Lightning Strikes Based on a Coupled Arc-Thermal-Electric Simulation

Experimental and theoretical research on the temperature evolution law of overcurrent fault wires

Numerical Simulation on Thermal Decomposition Process of Electric Arc Fault in Epoxy Resin Impregnated Paper Bushing

Electrothermal Distortion Analysis and Structural Strain Assessment of Vehicle Cable Terminals under Bending Stresses

Thermal Stability Analysis and Design for Electrical Product in Short-Circuit Fault