Probing anode microstructure

Yasutoshi Iriyama

DOI: https://doi.org/10.1038/s41563-024-02021-9

IF: 41.2

2024-11-28

Nature Materials

Abstract:Using focused ion-beam milling and electron backscatter diffraction, lithium and sodium metal anode microstructures in all-solid-state batteries are found to possess large grains that coarsen during electrodeposition.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter

What problem does this paper attempt to address?

Imaging the microstructure of lithium and sodium metal in anode-free solid-state batteries using electron backscatter diffraction

Till Fuchs,Till Ortmann,Juri Becker,Catherine G Haslam,Maya Ziegler,Vipin Kumar Singh,Marcus Rohnke,Boris Mogwitz,Klaus Peppler,Linda F Nazar,Jeff Sakamoto,Jürgen Janek

DOI: https://doi.org/10.1038/s41563-024-02006-8

2024-09-23

Abstract:'Anode-free' or, more fittingly, metal reservoir-free cells could drastically improve current solid-state battery technology by achieving higher energy density, improving safety and simplifying manufacturing. Various strategies have been reported so far to control the morphology of electrodeposited alkali metal films to be homogeneous and dense, but until now, the microstructure of electrodeposited alkali metal is unknown, and a suitable characterization route is yet to be identified. Here we establish a reproducible protocol for characterizing the size and orientation of metal grains in differently processed lithium and sodium samples by a combination of focused ion beam and electron backscatter diffraction. Electrodeposited films at Cu|Li6.5Ta0.5La3Zr1.5O12, steel|Li6PS5Cl and Al|Na3.4Zr2Si2.4P0.6O12 interfaces were characterized. The analyses show large grain sizes (>100 µm) within these films and a preferential orientation of grain boundaries. Furthermore, metal growth and dissolution were investigated using in situ electron backscatter diffraction, showing a dynamic grain coarsening during electrodeposition and pore formation within grains during dissolution. Our methodology and results deepen the research field for the improvement of solid-state battery performance through a characterization of the alkali metal microstructure.
In Situ Atomic-Scale Imaging of Electrochemical Lithiation in Silicon.

Xiao Hua Liu,Jiang Wei Wang,Shan Huang,Feifei Fan,Xu Huang,Yang Liu,Sergiy Krylyuk,Jinkyoung Yoo,Shadi A. Dayeh,Albert V. Davydov,Scott X. Mao,S. Tom Picraux,Sulin Zhang,Ju Li,Ting Zhu,Jian Yu Huang

DOI: https://doi.org/10.1038/nnano.2012.170

IF: 38.3

2012-01-01

Nature Nanotechnology

Abstract:In lithium-ion batteries, the electrochemical reaction between the electrodes and lithium is a critical process that controls the capacity, cyclability and reliability of the battery. Despite intensive study, the atomistic mechanism of the electrochemical reactions occurring in these solid-state electrodes remains unclear. Here, we show that in situ transmission electron microscopy can be used to study the dynamic lithiation process of single-crystal silicon with atomic resolution. We observe a sharp interface (∼1 nm thick) between the crystalline silicon and an amorphous Li x Si alloy. The lithiation kinetics are controlled by the migration of the interface, which occurs through a ledge mechanism involving the lateral movement of ledges on the close-packed {111} atomic planes. Such ledge flow processes produce the amorphous Li x Si alloy through layer-by-layer peeling of the {111} atomic facets, resulting in the orientation-dependent mobility of the interfaces.
In Situ SEM Observation of Structured Si/C Anodes Reactions in an Ionic-Liquid-Based Lithium-Ion Battery

Huifeng Shi,Xianqiang Liu,Rui Wu,Yijing Zheng,Yonghe Li,Xiaopeng Cheng,Wilhelm Pfleging,Yuefei Zhang

DOI: https://doi.org/10.3390/app9050956

2019-01-01

Applied Sciences

Abstract:In situ scanning electron microscopy (SEM) offers a good way to investigate the structural evolution during lithiation and delithiation processes. In this paper, the dynamical morphological evolution of 3D-line-structured/unstructured Si/C composite electrodes was observed by in situ SEM. The investigation revealed the microstructural origin of large charge capacity for 3D-line-structured anodes. Based on this proposed mechanism, a coarse optimization of 3D-line-structured anodes was proposed. These results shed light on the unique advantages of using an in situ SEM technique when studying realistic bulk batteries and designing 3D electrode structures.
Revealing the Design Principles of Ni-Rich Cathodes for All-Solid-State Batteries

Wei Jiang,Xinxin Zhu,Renzhi Huang,Shu Zhao,Xinming Fan,Min Ling,Chengdu Liang,Liguang Wang

DOI: https://doi.org/10.1002/aenm.202103473

IF: 27.8

2022-01-01

Advanced Energy Materials

Abstract:Electrode microstructure is one of the primary factors determining the electrochemical properties of all-solid-state batteries (ASSBs). However, the key principles of electrode design to realize fast ionic/electronic transport pathways are not well elucidated. Herein, the correlation between electrode microstructure and electrochemical behaviors is studied through different electrode design in terms of energy-density-related electrode composition and Ni-rich layered oxides particle size distribution. A positive relation between particle size and mass fraction in electrode design is revealed, that is, as the particle size increases, more cathode materials are required to enable the fast reaction kinetics. The well interconnected active particles and solid electrolytes construct the highly percolated ionic/electronic transfer networks, which determines the overall electrochemical properties. The findings in this work give a new insight into electrode design to promote the development of high-energy and high-power ASSBs.
Tunable structure and dynamics of solid electrolyte interphase at lithium metal anode

Shuang-Yan Lang,Zhen-Zhen Shen,Xin-Cheng Hu,Yang Shi,Yu-Guo Guo,Fei-Fei Jia,Fu-Yi Wang,Rui Wen,Li-Jun Wan

DOI: https://doi.org/10.1016/j.nanoen.2020.104967

IF: 17.6

2020-09-01

Nano Energy

Abstract:Interfacial processes of lithium (Li) deposition and solid electrolyte interphase (SEI) formation are key determinants of the safety and performance in high-energy Li metal batteries. With the vigorous growth of effective strategies for stabilizing the interfaces, high-resolution and in situ characterization techniques are contemporaneously needed for probing and regulating the underlying mechanisms of these two processes and their interrelation. Therefore, we introduce in situ atomic force microscopy (AFM) that enables direct observation of the nanoscale morphology and dynamic evolution of the Li/electrolyte interfaces in working environments. Inhomogeneous SEI with nanoparticles (NPs) forms in traditional electrolyte, which extends with chain-like wrinkles as dendrite nucleates. By precisely controlling the concentration of lithium nitrate additive, we construct a compact bilayer SEI with a thin amorphous film covering a NP-packed layer structurally, promoting the uniform Li dissolution/deposition. This in situ AFM visualization in Li metal batteries highlights direct insights into distinct nanostructures and growth dynamics of nitrate-mediated SEI film at Li anode, and provides a universal and convenient technique for interfacial analysis and mechanistic understanding of Li metal anodes.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
In situ observation of solid electrolyte interphase evolution in a lithium metal battery

Maryam Golozar,Andrea Paolella,Hendrix Demers,Stéphanie Bessette,Marin Lagacé,Patrick Bouchard,Abdelbast Guerfi,Raynald Gauvin,Karim Zaghib

DOI: https://doi.org/10.1038/s42004-019-0234-0

IF: 7.211

2019-11-15

Communications Chemistry

Abstract:Abstract Lithium metal is a favorable anode material in all-solid Li-polymer batteries because of its high energy density. However, dendrite formation on lithium metal causes safety concerns. Here we obtain images of the Li-metal anode surface during cycling using in situ scanning electron microscopy. Constructing videos from the images enables us to monitor the failure mechanism of the battery. Our results show the formation of dendrites on the edge of the anode and isles of decomposed lithium bis(trifluoromethanesulfonyl)imide on the grain boundaries. Cycling at high rates results in the opening of the grain boundaries and depletion of lithium in the vicinity of the isles. We also observe changes in the surface morphology of the polymer close to the anode edge. Extrusion of lithium from these regions could be evidence of polymer reduction due to a local increase in temperature and thermal runaway assisting in dendrite formation.

chemistry, multidisciplinary
Li6PS5Cl microstructure and influence on dendrite growth in solid-state batteries with lithium metal anode

Dheeraj Kumar Singh,Anja Henss,Boris Mogwitz,Ajay Gautam,Jonas Horn,Thorben Krauskopf,Simon Burkhardt,Joachim Sann,Felix H. Richter,Jürgen Janek

DOI: https://doi.org/10.1016/j.xcrp.2022.101043

IF: 8.9

2022-09-21

Cell Reports Physical Science

Abstract:Enabling lithium metal is key toward maximizing the energy density of solid-state batteries (SSBs) with a solid electrolyte (SE) as the separator. However, the formation of pores at the LiǀSE interface during stripping and short-circuiting during cathodic plating through dendrite growth hinder stable cycling at higher current density. The interface and bulk microstructure of SEs govern the dendrite growth mechanism and hence the maximum or critical current density (CCD) an SE can sustain before shorting. Herein, via the control of the grain size of Li6PS5Cl (LPSCl), we show that interface and bulk microstructure can be simultaneously tailored to significantly influence the CCD. Based on the microstructure-strength relationship, we discuss mechanical failure mechanisms in SSBs derived from correlations between focused ion beam (FIB)-SEM and electrochemical data analyses. We propose that the microstructural influence on local current density and dendrite growth is well connected to the concept of crack growth resistance, or “R curve behavior,” observed in certain materials.
In Situ TEM Investigation of Congruent Phase Transition and Structural Evolution of Nanostructured Silicon/Carbon Anode for Lithium Ion Batteries

Chong-Min Wang,Xiaolin Li,Zhiguo Wang,Wu Xu,Jun Liu,Fei Gao,Libor Kovarik,Ji-Guang Zhang,Jane Howe,David J. Burton,Zhongyi Liu,Xingcheng Xiao,Suntharampillai Thevuthasan,Donald R. Baer

DOI: https://doi.org/10.1021/nl204559u

IF: 10.8

2012-03-06

Nano Letters

Abstract:It is well-known that upon lithiation, both crystalline and amorphous Si transform to an armorphous Li(x)Si phase, which subsequently crystallizes to a (Li, Si) crystalline compound, either Li(15)Si(4) or Li(22)Si(5). Presently, the detailed atomistic mechanism of this phase transformation and the degradation process in nanostructured Si are not fully understood. Here, we report the phase transformation characteristic and microstructural evolution of a specially designed amorphous silicon (a-Si) coated carbon nanofiber (CNF) composite during the charge/discharge process using in situ transmission electron microscopy and density function theory molecular dynamic calculation. We found the crystallization of Li(15)Si(4) from amorphous Li(x)Si is a spontaneous, congruent phase transition process without phase separation or large-scale atomic motion, which is drastically different from what is expected from a classic nucleation and growth process. The a-Si layer is strongly bonded to the CNF and no spallation or cracking is observed during the early stages of cyclic charge/discharge. Reversible volume expansion/contraction upon charge/discharge is fully accommodated along the radial direction. However, with progressive cycling, damage in the form of surface roughness was gradually accumulated on the coating layer, which is believed to be the mechanism for the eventual capacity fade of the composite anode during long-term charge/discharge cycling.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Interface Controls Large-Volume Change Anodes Pulverization

Namhyung Kim,Yaobin Xu,Bharat Gwalani,Jiyu Cai,Matthew Fayette,Fredrick Omenya,Guosheng Li,Peiyuan Gao,David Reed,Zonghai Chen,Chongmin Wang,Xiaolin Li

DOI: https://doi.org/10.1149/ma2023-015950mtgabs

2023-08-28

ECS Meeting Abstracts

Abstract:Micron sized alloys have been considered as the most attractive candidates for advanced lithium or sodium ion battery anodes due to their high capacity, cost effectiveness, and ease of mass production. However, their large volume variation during (de)alloying reaction with Li or Na ions causes severe mechanical degradation of anode materials, resulting in particle pulverization and loss of electrical interparticle contact. In addition, this substantial volumetric fluctuation leads to newly exposed anode surface to electrolyte and instability of solid-electrolyte interphase (SEI), which can bring about continuously formation of SEI layers. To mitigate the large volume change issues of micron sized alloys, various approaches have been studied such as introducing various electrolytes and additives for stabilizing the SEI layers. However, these modified SEI layers are still not enough to suppress the large volume fluctuation of micron sized alloys. Here, we demonstrate that the effect of interface between electrolyte and anode surface on anode pulverization. With micron sized alloying anodes for sodium-ion batteries (Bi and Sn), we observed substantially different pulverization behavior as a choice of electrolyte solvents leading to different anode-electrolyte interface. This different interface reactivity between solvents has a big impact on not only pulverization behavior of alloying anodes but also formation and growth of SEI layers on the surface of anode. Thus, the electrochemical performances of the alloying anodes also can be influenced by its interface characteristics. We thoroughly analyzed the effect of interface of alloying anode from electrode-level to nanoscale by various characterization tools such as Scanning electron microscopy (SEM), X-ray computed tomography (X-ray CT), X-ray photoelectron spectroscopy (XPS), Atom probe tomography (APT), and cryo-transmission electron microscopy (TEM). Moreover, we clarified the mechanism of the interface reaction and pulverization pathway by theoretical simulations. We believe this study can help researchers to understand the degradation behavior of large volume change alloy anodes.
Investigation of Microstructural Evolution in All-Solid-State Micro-Batteries through in situ Electrochemical TEM

Sorina Cretu,Nicolas Folastre,David Troadec,Ingrid Marie Andersen,Rainer Straubinge,Nynke A. Krans,Stéphane Aguy,Arash Jamali,Martial Duchamp,Arnaud Demortière

2024-11-03

Abstract:All-solid-state batteries hold great promise for electric vehicle applications due to their enhanced safety and higher energy density. However, further performance optimization requires a deeper understanding of their degradation mechanisms, particularly at the nanoscale. This study investigates the real-time degradation processes of an oxide-based all-solid-state micro-battery, using focused ion beam lamellae composed of LAGP as the solid electrolyte, LiFePO4 (LFP) composite as the positive electrode, and LiVPO4 (LVP) composite as the negative electrode. In situ electrochemical transmission electron microscopy (TEM) revealed critical degradation phenomena, including the formation of cracks along grain boundaries in the solid electrolyte due to lithium diffusion and mechanical stress. Additionally, the shrinkage of solid electrolyte particles and the formation of amorphous phases were observed. These findings highlight the importance of grain boundary dynamics and amorphization in the performance of solid electrolytes and provide insights into degradation mechanisms that can inform the design of more durable all-solid-state batteries.

Materials Science,Applied Physics,Chemical Physics,Instrumentation and Detectors
Advanced Micro/Nanostructures for Lithium Metal Anodes

Rui Zhang,Nian-Wu Li,Xin-Bing Cheng,Ya-Xia Yin,Qiang Zhang,Guo

DOI: https://doi.org/10.1002/advs.201600445

IF: 15.1

2017-01-01

Advanced Science

Abstract:Owning to their very high theoretical capacity, lithium metal anodes are expected to fuel the extensive practical applications in portable electronics and electric vehicles. However, unstable solid electrolyte interphase and lithium dendrite growth during lithium plating/stripping induce poor safety, low Coulombic efficiency, and short span life of lithium metal batteries. Lately, varies of micro/nanostructured lithium metal anodes are proposed to address these issues in lithium metal batteries. With the unique surface, pore, and connecting structures of different nanomaterials, lithium plating/stripping processes have been regulated. Thus the electrochemical properties and lithium morphologies have been significantly improved. These micro/nanostructured lithium metal anodes shed new light on the future applications for lithium metal batteries.
In Situ Monitoring of Lithium Metal Anodes and Their Solid Electrolyte Interphases by Transmission Electron Microscopy

Chih-Yao Chen,Tetsuya Tsuda,Yoshifumi Oshima,Susumu Kuwabata

DOI: https://doi.org/10.1002/sstr.202100018

IF: 15.9

2021-05-02

Small Structures

Abstract:Lithium (Li) metal anodes (LMAs) are considered to be the holy grail of electrodes to enable advanced battery chemistry for energy‐intensive applications. However, the formation of Li dendrites and their intricate interplay with the solid electrolyte interphase (SEI) remain unclear to date. Herein, a simple yet efficient methodology for in situ transmission electron microscopy (TEM) observation is reported, and the relationship between the SEI chemistry and the morphology of LMAs is unraveled by a combination of TEM imaging and selected area electron diffraction analysis in an unprecedented way. The authors find that the coexistence of LiF and Li3N in the SEI layer helps realize dendrite‐free Li deposition and directly visualize the deposition–dissolution behavior of individual Li deposits with different microstructures. The approach should be applicable to scrutinize a broad range of interfacial reactions in nonvolatile electrolytes (e.g., ionic liquid, glass‐, and ceramic‐based electrolytes) relevant to future energy storage devices, including magnesium secondary batteries. A new transmission electron microscopy methodology is presented to accurately monitor the morphology evolution of lithium metal anodes and their solid electrolyte interphases (SEIs) under realistic operation conditions. This method combines the advantages of conventional open‐cell (high‐resolution visualization) and liquid‐cell approaches (better mimicking a real battery), which will expedite the development of next‐generation electrode materials.
Micromechanism in All-Solid-State Alloy-Metal Batteries: Regulating Homogeneous Lithium Precipitation and Flexible Solid Electrolyte Interphase Evolution

Jing Wan,Yue-Xian Song,Wan-Ping Chen,Hui-Juan Guo,Yang Shi,Yu-Jie Guo,Ji-Lei Shi,Yu-Guo Guo,Fei-Fei Jia,Fu-Yi Wang,Rui Wen,Li-Jun Wan

DOI: https://doi.org/10.1021/jacs.0c10121

IF: 15

2020-12-31

Journal of the American Chemical Society

Abstract:Sulfide-based solid-state electrolytes (SSEs) matched with alloy anodes are considered as promising candidates for application in all-solid-state batteries (ASSBs) to overcome the bottlenecks of the lithium (Li) anode. However, an understanding of the dynamic electrochemical processes on alloy anode in SSE is still elusive. Herein, <i>in situ</i> atomic force microscopy gives insights into the block-formation and stack-accumulation behaviors of Li precipitation on an Li electrode, uncovering the morphological evolution of nanoscale Li deposition/dissolution in ASSBs. Furthermore, two-dimensional Li–indium (In) alloy lamellae and the homogeneous solid electrolyte interphase (SEI) shell on the In electrode reveal the precipitation mechanism microscopically regulated by the alloy anode. The flexible and wrinkle-structure SEI shell further enables the electrode protection and inner Li accommodation upon cycles, elucidating the functional influences of SEI shell on the cycling behaviors. Such on-site tracking of the morphological evolution and dynamic mechanism provide an in-depth understanding and thus benefit the optimizations of alloy-based ASSBs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/jacs.0c10121?goto=supporting-info">https://pubs.acs.org/doi/10.1021/jacs.0c10121</a>.Additional AFM images, quantitative analysis via MATLAB, XRD and ToF-SIMS characterizations (<a class="ext-link" href="/doi/suppl/10.1021/jacs.0c10121/suppl_file/ja0c10121_si_001.pdf">PDF</a>)Dynamic formation and evolution kinetics of the lithiation/delithiation processes on indium electrode (<a class="ext-link" href="/doi/suppl/10.1021/jacs.0c10121/suppl_file/ja0c10121_si_002.avi">AVI</a>)This article has not yet been cited by other publications.

chemistry, multidisciplinary
In situ microscopy and spectroscopy characterization of microsized Sn anode for sodium-ion batteries

Amine Daali,Xinwei Zhou,Chen Zhao,Inhui Hwang,Zhenzhen Yang,Yuzi Liu,Rachid Amine,Cheng-Jun Sun,Wilkistar Otieno,Gui-Liang Xu,Khalil Amine

DOI: https://doi.org/10.1016/j.nanoen.2023.108753

IF: 17.6

2023-08-06

Nano Energy

Abstract:Microsized Sn is a promising anode material for sodium-ion batteries in terms of cost, specific capacity, and volumetric energy density, which however suffers from huge volume changes and rapid cell degradation upon cycling. Despite recent advances via nanostructured electrode design and interface engineering, the correlation between mechanical stability, solid-electrolyte interphase (SEI) and reaction kinetics/reversibility remains controversial and elusive. Here, by combining in situ scanning electron microcopy and X-ray absorption spectroscopy as well as X-ray photoelectron spectroscopy, we have investigated the underlying electro-chemo-mechanical behavior and their coupling effects during charge/discharge of microsized Sn anode. Our results revealed that microsized Sn is pulverized into nanoparticles with simultaneous formation of numerous voids and pores upon the 1st charge/discharge, while the electrolytes composition plays a critical role on the consequent parasitic reactions and eventually the sodiation/de-sodiation reversibility . In contrast to carbonate-based electrolytes, ether-based electrolytes enabled formation of inorganic species dominated SEI with improved mechanical strength, thus leading to higher specific capacity and improved cycling stability. The present findings are crucial for future development of microsized anode materials for rechargeable batteries with high volumetric energy density.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Electrode microstructure controls localized electronic impedance in Li-ion batteries

John E. Vogel,Mehdi M. Forouzan,Emilee E. Hardy,Sean T. Crawford,Dean R. Wheeler,Brian A. Mazzeo

DOI: https://doi.org/10.1016/j.electacta.2018.11.204

IF: 6.6

2019-02-01

Electrochimica Acta

Abstract:Substantial heterogeneity and defects in lithium-ion battery films can be a cause of material and battery failure. Although non-uniformity has been observed previously, the physical origin of electronic impedance non-uniformities in cathode materials has not been well-studied. We show that the local microscopic structure of materials strongly affects the resulting local impedance as measured by a micro-four-line probe, demonstrates large variation, and that these variations occur over sub-millimeter and larger distances on two different commercial cathode materials. These experimental results are further compared to modeled electronic and ionic transport pathways through the observed structure. By elucidating the extent and origins of heterogeneity in battery electrode films we provide a key principle through which batteries can be optimally designed to increase their safety, energy density, power, and longevity.

electrochemistry
Dynamic Molecular Investigation of the Solid-Electrolyte Interphase of an Anode-Free Lithium Metal Battery Using In Situ Liquid SIMS and Cryo-TEM

Cuixia Cheng,Yadong Zhou,Yaobin Xu,Hao Jia,Jumyeong Kim,Wu Xu,Chongmin Wang,Peiyuan Gao,Zihua Zhu

DOI: https://doi.org/10.1021/acs.nanolett.3c00709

IF: 10.8

2023-09-15

Nano Letters

Abstract:We use in situ liquid secondary ion mass spectroscopy, cryogenic transmission electron microscopy, and density functional theory calculation to delineate the molecular process in the formation of the solid-electrolyte interphase (SEI) layer under the dynamic operating conditions. We discover that the onset potential for SEI layer formation and the thickness of the SEI show dependence on the solvation shell structure. On a Cu film anode, the SEI is noticed to start to form at around 2.0 V...

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Investigating microstructure evolution of lithium metal during plating and stripping via operando X-ray tomographic microscopy

Matthew Sadd,Shizhao Xiong,Jacob R. Bowen,Federica Marone,Aleksandar Matic

DOI: https://doi.org/10.1038/s41467-023-36568-z

IF: 16.6

2023-02-15

Nature Communications

Abstract:Abstract Efficient lithium metal stripping and plating operation capable of maintaining electronic and ionic conductivity is crucial to develop safe lithium metal batteries. However, monitoring lithium metal microstructure evolution during cell cycling is challenging. Here, we report the development of an operando synchrotron X-ray tomographic microscopy method capable of probing in real-time the formation, growth, and dissolution of Li microstructures during the cycling of a Li||Cu cell containing a standard non-aqueous liquid electrolyte solution. The analyses of the operando X-ray tomographic microscopy measurements enable tracking the evolution of deposited Li metal as a function of time and applied current density and distinguishing the formation of electrochemically inactive Li from the active bulk of Li microstructures. Furthermore, in-depth analyses of the Li microstructures shed some light on the structural connectivity of deposited Li at different current densities as well as the formation mechanism of fast-growing fractal Li microstructures, which are ultimately responsible for cell failure.

multidisciplinary sciences
Nanomechanics of Li-ion battery materials

Hugues-Yanis Amanieu

2015-12-14

Abstract:Active materials used in lithium ion batteries consist of micro-metric ceramic particles. Mechanical failure can happen within these brittle particles due to large internal stresses provoked by lithium intercalating in the crystalline structure during charge and discharge. Their mechanical behavior is directly related to some key intrinsic parameters, namely the elastic modulus, the fracture toughness and lithium di usivity. This works deals with the development of new characterization techniques to quantify these parameters at the local scale. Obtaining quantitative measurements is notably challenging for this type of specimen due to the highly heterogeneous structure of battery electrodes. For this, spinel LiMn2O4-based commercial cathodes are proposed as material of investigation. First, composition analysis of cathode materials at di erent states of charge was done. In general it was noticed that commercial cells are not as consistent as laboratory cells: impurities are often present (Ni, Co,...) and particles can be porous agglomerates of nanoparticles as well as large single grains. However only spinel structure was detected by X-ray di raction and Rietveld analysis showed a typical lattice expansion for higher lithium concentrations. A method using nanoindentation was developed. It consists of applying a large number of indents in cathode cross-sections and subsequently ltering the measurements depending on whether they t the set of hypotheses of the Oliver and Pharr method. It was observed that for decreasing lithium concentrations, the elastic modulus and the hardness increase from 87 GPa (0% State of Charge) to 104 GPa (100% SoC) and from 7.0 GPa (0% SoC) to 8.0 Gpa (100%SoC), respectively. With the help of contact-resonance atomic force microscopy, the elastic property could also be qualitatively mapped and it seems that the particles are homogeneous. Added to micro-raman spectroscopy, it was observed that neighboring particles can have di erent lithiation levels. The fracture toughness was estimated by measuring the crack opening displacement by atomic force microscopy and applying Irwin’s near eld theory. A toughness of about 0.9 MPa·m was found but should not be taken at face-value. Irwin’s theory requires a purely elastic-brittle fracture with traction-free crack walls. Unfortunately this condition cannot be met due to the size of the particles and the toughness is surely overestimated. Associated with electron backscattered di raction, cleavage planes were also evaluated on a reference {111} wafer. It was found that cracks always propagate in the <121> direction, corresponding to {101} planes just below the surface. At higher depths (> 100 nm), the crack deviates of 30 to 40◦. The last part of this work consists of developing a model to better comprehend electrochemical strain microscopy “time spectroscopy” (ESM-TS). It is the most promising technique to quantify locally ionic di usion coe cients. An AFM cantilever is used

Chemistry,Engineering,Materials Science
In-situ Study of Surface Structure Evolution of Silicon Anodes by Electrochemical Atomic Force Microscopy

Shiqiang Huang,Ling-Zhi Cheong,Shuwei Wang,Deyu Wang,Cai Shen

DOI: https://doi.org/10.1016/j.apsusc.2018.05.020

IF: 6.7

2018-01-01

Applied Surface Science

Abstract:Silicon is one of the most promising anode materials for lithium ion batteries because of its extremely high theoretical capacity. However, silicon suffers from mechanical degradation caused by huge volume change and unstable solid electrolyte interphase (SEI) layers. Herein, we report an in situ electrochemical atomic force microscopy (EC-AFM) method to directly visualize the surface topography and analyze Young's modulus of micron-sized (Micron-Si) and nano-sized (Nano-Si) silicon electrodes. Our results show Micron-Si electrodes experienced volume expansion and contraction process which resulted in continuous growth of a thick but soft SEI layer on the surface. In contrast, Nano-Si electrodes demonstrate a thin SEI layer due to absence of volume expansion and contraction process. Young's modulus value shows that the SEI film of Nano-Si electrodes is harder than that of the Micron-Si electrodes. Ex situ XPS analysis reveals that Nano-Si electrodes are composed of mainly inorganic components particularly LiF and carbonate-like species which might contribute to the increased hardness. Results from present study may be helpful to build better SEI layer with good Young's modulus to buffer volume expansion of Si. (C) 2018 Published by Elsevier B.V.
Morphology evolution of electrodeposited lithium on metal substrates

XingXing Jiao,Yongjing Wang,Olesya O. Kapitanova,Xieyu Xu,Valentyn S. Volkov,Yangyang Liu,Zhongxiao Song,Aleksandar Matic,Shizhao Xiong

DOI: https://doi.org/10.1016/j.ensm.2023.102916

IF: 20.4

2023-08-01

Energy Storage Materials

Abstract:Lithium (Li) metal is deemed to be the high-energy-density anode material for next generation batteries, but its practical application is impeded by the uneven electrodeposition during charge of battery, which leads to the low Coulombic efficiency and potential safety issue. Here, multiscale modeling is fabricated to understand the morphology evolution of Li during electrodeposition process, from the self-diffusion of Li adatoms on electrode surface, to the nucleation process, and to the formation of Li microstructures, revealing the correlation between final morphology and deposition substrates. Energy batteries and self-diffusion of Li adatom on various substrates (lithium, copper, nickel, magnesium, and silver) result in the different nucleation size, which is calculated by kinetic Monte Carlo simulation based on classical nucleation theory. Formation of Li substructures that are grown from Li nuclei, is revealed by phase field modeling coupled with cellular automaton method. Our results show that larger Li nuclei is obtained under faster self-diffusion of Li adatom, leading to the low aspect ratio of Li substructures and the subsequent morphology evolution of electrodeposited Li. Furthermore, the electrodeposition of Li is strongly regulated by the selection of substrates, giving the practical guideline of anode design in rechargeable Li metal batteries. It is worthy to mention that this method to investigate the electro-crystallization process involving nucleation and growth can be transplanted to the other metallic anode, such as sodium, potassium, zinc, magnesium, calcium and the like.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology

Probing anode microstructure

Imaging the microstructure of lithium and sodium metal in anode-free solid-state batteries using electron backscatter diffraction

In Situ Atomic-Scale Imaging of Electrochemical Lithiation in Silicon.

In Situ SEM Observation of Structured Si/C Anodes Reactions in an Ionic-Liquid-Based Lithium-Ion Battery

Revealing the Design Principles of Ni-Rich Cathodes for All-Solid-State Batteries

Tunable structure and dynamics of solid electrolyte interphase at lithium metal anode

In situ observation of solid electrolyte interphase evolution in a lithium metal battery

Li6PS5Cl microstructure and influence on dendrite growth in solid-state batteries with lithium metal anode

In Situ TEM Investigation of Congruent Phase Transition and Structural Evolution of Nanostructured Silicon/Carbon Anode for Lithium Ion Batteries

Interface Controls Large-Volume Change Anodes Pulverization

Investigation of Microstructural Evolution in All-Solid-State Micro-Batteries through in situ Electrochemical TEM

Advanced Micro/Nanostructures for Lithium Metal Anodes

In Situ Monitoring of Lithium Metal Anodes and Their Solid Electrolyte Interphases by Transmission Electron Microscopy

Micromechanism in All-Solid-State Alloy-Metal Batteries: Regulating Homogeneous Lithium Precipitation and Flexible Solid Electrolyte Interphase Evolution

In situ microscopy and spectroscopy characterization of microsized Sn anode for sodium-ion batteries

Electrode microstructure controls localized electronic impedance in Li-ion batteries

Dynamic Molecular Investigation of the Solid-Electrolyte Interphase of an Anode-Free Lithium Metal Battery Using In Situ Liquid SIMS and Cryo-TEM

Investigating microstructure evolution of lithium metal during plating and stripping via operando X-ray tomographic microscopy

Nanomechanics of Li-ion battery materials

In-situ Study of Surface Structure Evolution of Silicon Anodes by Electrochemical Atomic Force Microscopy

Morphology evolution of electrodeposited lithium on metal substrates