Abstract:Micrometer-sized single crystal cathodes have garnered significant interest as promising cathode materials for lithium-ion batteries due to their ability to reduce surface area exposure to electrolytes and suppress side reactions, thereby enhancing electrochemical performance. One of the challenging issues with single crystal cathode materials is synthesizing monodisperse and discrete single crystals rather than agglomerated quasi-single crystals. However, conventional solid-state synthesis of most single crystals results in severe agglomeration and cation mixing, as it requires high temperatures to promote particle growth to several micrometers. In this study, a novel morphology-conserving reaction strategy that employs octahedron single crystal intermediates is introduced to synthesize discrete, monodisperse LiNi0.97Co0.02Mn0.01O2 octahedron single crystals. This scalable and cost-effective approach involves using rock-salt Ni0.97Co0.02Mn0.01O1+x octahedrons as single crystal intermediates, which are transformed in unreactive unary lithium salt melts (LiCl and Li2SO4) from spherical Ni0.97Co0.02Mn0.01(OH)2 obtained via coprecipitation. These intermediates are then subjected to a stoichiometric amount of Li precursor in a conventional solid-state synthesis to produce layered LiNi0.97Co0.02Mn0.01O2. This process is a morphology-conserving lithiation reaction, leading to the formation of discrete and monodisperse LiNi0.97Co0.02Mn0.01O2 octahedron single crystals. The resultant LiNi0.97Co0.02Mn0.01O2 single crystals demonstrate superior electrochemical performance, including stable capacity retention over 150 cycles, which surpasses that of typical quasi-single crystals produced through conventional methods. This is attributed to negligible crack formation during cycling, in contrast to significant cracking observed in conventional quasi-single crystals. This implies that single-crystal forms are preferred over agglomerated quasi-single crystal forms for enhancing cycle performance. These findings provide valuable insights into the industrial synthesis of discrete and monodisperse ultrahigh-nickel oxide cathode materials.

Simultaneous Single Crystal Growth and Segregation of Ni-Rich Cathode Enabled by Nanoscale Phase Separation for Advanced Lithium-Ion Batteries

Simultaneous Single Crystal Growth and Segregation of Ni-Rich Cathode Enabled by Nanoscale Phase Separation for Advanced Lithium-Ion Batteries

Lithium‐Ion Batteries: Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode Material for Lithium‐Ion Batteries (Adv. Energy Mater. 15/2019)

Ton-scale preparation of single-crystal Ni-rich ternary cathode materials for high-performance lithium ion batteries

Well-dispersed single-crystalline nickel-rich cathode for long-life high-voltage all-solid-state batteries

Synthesis of Monodisperse and Discrete Ultra-High Nickel LiNi0.97Co0.02Mn0.01O2 Octahedral Single Crystals via Single Crystal Intermediates for Li-Ion Batteries

In situ epitaxial growth and electrochemical conversion of LiNi0.5Mn1.5O4 thin layer on Ni-rich cathode materials for high voltage lithium-ion batteries

Enhanced electrochemical performance of nanoscale single crystal NMC811 modification by coating LiNbO3

The surface double-coupling on single-crystal LiNi0.8Co0.1Mn0.1O2 for inhibiting the formation of intragranular cracks and oxygen vacancies

Stabilizing high-Ni cathodes with gradient surface Ti-enrichment

Controlled Synthesis of Single-Crystalline Ni-Rich Cathodes for High-Performance Lithium-Ion Batteries

Elevating cycle stability of Ni-rich NCM811 cathode via single-crystallization integrating dual-modification strategy for lithium-ion batteries

Unveiling thermal decomposition kinetics of Single-Crystalline Ni-Rich LiNi0.88Co0.07Mn0.05O2 cathode for safe Lithium-Ion batteries

Synthesis of single-crystal LiNi0.8Co0.1Mn0.1O2 materials for Li-ion batteries by microfluidic technology

Synergistic Effect of B-Nb Co-modified to Achieve Crystal Structure and Interface Tuning for Ni-rich Cathode

All-Dry Solid-Phase Synthesis of Single-Crystalline Ni-Rich Co-Poor Ternary Cathodes for Li-Ion Batteries

Enabling high energy lithium metal batteries via single-crystal Ni-rich cathode material co-doping strategy

In-situ construction of a thermodynamically stabilized interface on the surface of single crystalline Ni-rich cathode materials via a one-step molten-salt route

Crystallographic‐Site‐Specific Structural Engineering Enables Extraordinary Electrochemical Performance of High‐Voltage LiNi 0.5 Mn 1.5 O 4 Spinel Cathodes for Lithium‐Ion Batteries

A Ternary MOF Derived Single Crystalline LiNi1/3Mn1/3Co1/3O2 As High-Voltage Cathodes for Lithium-Ion Batteries

Atomic-Resolution In Situ Exploration of the Phase Transition Triggered Failure in a Single-Crystalline Ni-Rich Cathode