Abstract:Electro-reduction of O2 to generate H2O2 is an attractive alternative to the current anthraquinone process and quietly necessary for the chemical industries and environmental remediation. It is general that sufficient porous structure contributes to expose more catalytic active sites and shorten diffusion paths for the heterogeneous catalysis of O2. In this work, initially, the Fe3O4 nanoparticles embedded graphite felt (Fe3O4@GF) is prepared through a mild hydrothermal following with thermal reduction method. This special combination not only provides iron source for the electro-Fenton reaction, but also supplies rich active sites from the Fe3O4 embedded structure with abundant cracks, which are beneficial to increase the reaction rate. Compared with raw graphite felt (RGF), the fresh Fe3O4@GF exhibits superior pollutant degradation kinetics with more than 400% increase and approximately 37.8% improvement to the removal of total organic carbon. 98% decolorization of rhodamine B (RhB) can be achieved in just 5 minutes, and quickly complete 100% removal of RhB in the next few seconds. As the electro-Fenton reaction progresses, Fe3O4 dissolves in the electrolyte, leaving porous structure on the surface of the GF to form a porous GF (PGF), and the rapid radical reaction activates GF surface. Both the chemical etching of Fe3O4 and the electro-Fenton process can further increase the specific surface area, defects and actives sites of the electrode. As expected, the active PGF exhibits favorable performance of H2O2 production among in pH=1 (320.0±36.5 mg L-1), 3 (301.9±13.2 mg L-1) and 7 (320.4±21.2 mg L-1) electrolyte. The degradation performance of PGF does not significantly decay even after 20 times repeated use, indicating the good structural stability and long-term durability. The superiority of the in-situ Fe source and fast reaction kinetics for electro-Fenton of Fe3O4@GF is confirmed, and this holey-engineered strategy also provides the possibility to achieve swift water purification and open up a new way for developing efficient carbon-based electrodes.

Enhancement of H2O2 yield and TOC removal in electro-peroxone process by electrochemically modified graphite felt: Performance, mechanism and stability

Mechanisms of Enhanced Total Organic Carbon Elimination from Oxalic Acid Solutions by Electro-Peroxone Process

Janus graphite felt cathode dramatically enhance the H2O2 yield from O2 electroreduction by the hydrophilicity-hydrophobicity regulation

Simultaneously Providing Iron Source towards Electro-Fenton Process and Enhancing Hydrogen Peroxide Production via a Fe3O4 Nanoparticles Embedded Graphite Felt Electrode.

O-doped graphitic granular biochar enables pollutants removal via simultaneous H2O2 generation and activation in neutral Fe-free electro-Fenton process

Efficient electrosynthesis of H 2 O 2 through electrodeposition-modified cathode and side-aeration integration

Highly efficient electrosynthesis of hydrogen peroxide through the combination of side aeration and vacuum filtration modified graphite felt

A novel Electro-Fenton process characterized by aeration from inside a graphite felt electrode with enhanced electrogeneration of H2O2 and cycle of Fe3+/Fe2+

Enhancement of oxygen reduction on a newly fabricated cathode and its application in the electro-Fenton process

Oxygen-containing functional groups in Fe3O4@three-dimensional graphene nanocomposites for enhancing H2O2 production and orientation to 1O2 in electro-Fenton

High-efficiency electrochemical activation of H2O2 into ·OH enabled by flow-through FeOCl-modified carbon electrode for organic pollutants degradation

Fabrication of superhydrophilic porous carbon materials through a porogen-free method: Surface and structure modification promoting the two-electron oxygen reduction activity

Synthesis of PbO x to graphite felt anodes to improve the electro-assisted catalytic wet air oxidation of oxygen species for efficient dye degradation

The competition between cathodic oxygen and ozone reduction and its role in dictating the reaction mechanisms of an electro-peroxone process.

The Electro-Peroxone Process for the Abatement of Emerging Contaminants: Mechanisms, Recent Advances, and Prospects

New Insights into the Surface-Dependent Activity of Graphitic Felts for the Electro-Generation of H2O2

The Beneficial Effect of Cathodic Hydrogen Peroxide Generation on Mitigating Chlorinated By-Product Formation During Water Treatment by an Electro-Peroxone Process

Degradation of atrazine by electro-peroxone enhanced by Fe and N co-doped carbon nanotubes with simultaneous catalysis of H2O2 and O3

Electro-activation of O2 on MnO2/graphite felt for efficient oxidation of water contaminants under room condition

Integrated and Superaerophilic Ni-O-C Electrode enables Fast and Stable Electrochemical H2O2 Production for Electro-Fenton-like Process

Intensive investigation of the synergistic effects between electrocatalysis and peroxymonosulfate activation for efficient organic elimination