Abstract:Energy harvesting by means of flow-induced vibrations (FIVs) enables continuous supply of power to micro electromechanical systems. Furthermore, FIV is one of the most popular means of energy harvesting. Inspired by wake-induced galloping and aerodynamic changes to a meta-surface structure, a wind-energy harvester (WEH) with a simple structure and high energy density is designed based on FIV (FIV-WEH). Furthermore, the effect of the meta-surface structure on FIV enhancement under elastic interference is discussed. Four experimental models with different heights under an elastic interference are designed: 0.8H cylinder (0.20 m), 0.6H cylinder (0.15 m), 0.4H cylinder (0.10 m), and 0.2H cylinder (0.05 m). The results show that the performance of the 0.6H cylinder is the strongest. It is 116.3% stronger than that of an ordinary cylinder. Based on the experimental models, a series of grooves with different angles is designed, abbreviated as 'Vα', where 'V' indicates that the repeating units are V-shaped and α indicates the centre angle corresponding to the chord length between adjacent repeating units. The addition of a meta-surface structure significantly changes the vibration behaviour of FIV-WEHs. Moreover, the larger the meta-surface structure size, the earlier the coupling vibration region appears. Therefore, the coupling vibration region first appeared on the 'V12' meta-surface, then on the 'V7.2' meta-surface, and finally, on the 'V3.6' meta-surface. A 'peak' phenomenon is observed, and its reason is explained by analysing the frequency. This study also identified a 'coupled vortex-induced vibration' region. Three different shapes of meta-surface structures are designed: 'V', 'T', and 'D' meta-surfaces. The results show that the performance of the 'V' and 'D' meta-surfaces is significantly improved compared to that of a bare cylinder. The 'V' meta-surface can increase the effective wind-speed bandwidth for energy utilization and exhibits the best performance, which is 66.04% higher than that of the 0.6H cylinder. Furthermore, the reason for the enhanced energy-harvesting performance of the 'V' meta-surface is explained through numerical simulations.

Hydrodynamic piezoelectric energy harvesting with strong shedding vortices by metasurface and wake–excited

Harvesting Both Wind Energy and Vibration Energy by a Zigzag Structure with Hybrid Magnetic and Piezoelectric Effects

A Broadband Zigzag-Shaped Energy Harvester for Both Wind Energy and Vibration Energy: Modeling and Experimental Verification

Hydrodynamic Piezoelectric Energy Harvesting with Topological Strong Vortex by Forced Separation

Piezoelectric energy harvesting from concurrent vortex-induced vibrations and base excitations

Hydrokinetic piezoelectric energy harvesting by wake induced vibration

Hybrid Vibration Energy Harvesting Based on Piezoelectric Polyline Beams with Electret Coupling

Designed Simulation and Experiment of a Piezoelectric Energy Harvesting System Based on Vortex-Induced Vibration

Modeling and Identification of Circular Cylinder-based Piezoaeroelastic Energy Harvesters

A Novel Model of Piezoelectric- Electromagnetic Hybrid Energy Harvester Based on Vortex-Induced Vibration

Modeling of Piezoelectric Energy Harvesting from Freely Oscillating Cylinders in Water Flow

Modeling and Experimental Study of a Piezoelectric Energy Harvester from Vortex Shedding-Induced Vibration

Piezoelectric Energy Harvesting from Vortex-Induced Vibration Using a Modified Circular Cylinder

Energy harvesting from flow-induced vibrations enhanced by meta-surface structure under elastic interference

Enhancing/diminishing piezoelectric energy harvesting by adjusting the attachment height

Flexible Plate in the Wake of a Square Cylinder for Piezoelectric Energy Harvesting—Parametric Study Using Fluid–Structure Interaction Modeling

A Study of Vortex-Induced Energy Harvesting from Water Using Pzt Piezoelectric Cantilever with Cylindrical Extension

Multi-branch Sandwich Piezoelectric Energy Harvester: Mathematical Modeling and Validation

Theoretical Modeling and Nonlinear Analysis of Piezoelectric Energy Harvesting from Vortex-Induced Vibrations

Modeling and Analysis of Upright Piezoelectric Energy Harvester under Aerodynamic Vortex-induced Vibration

A Piezoelectric Energy Harvester with Bending–Torsion Vibration in Low-Speed Water