Abstract:Solid oxide cell systems (SOCs) are increasingly being considered for electrical energy storage and as a means to boost the use of renewable energy and improve the grid flexibility by power-to-gas electrochemical conversion. The control of several variables (e.g., local temperature gradients and reactant utilization) is crucial when the stacks are used in dynamic operation with intermittent electrical power sources. In the present work, two 1D models of SOC stacks are established and used to investigate their dynamic behavior and to select and tune a suitable control strategy. Subsequently, safe operating ranges were determined to meet the thermal constraints of the stack by analysing not only the fuel cell (SOFC) and electrolyzer (SOEC) individual modes but also the switching between the two modes when the stack operates reversibly. The dynamic analysis shows that the control loops of our multi-input (reactant molar flow rates), multi-output (reactant utilization and maximum local temperature gradients) control system are strongly decoupled. Therefore, a proportional integral control strategy can be used to prevent dangerous stack operating conditions in dynamic operation. Finally, the controllers were tuned, and their transfer functions were reported. Convective heat transfer via air flow allows controlling the temperature of the solid structure of the cell/stack component, thus avoiding issues related to temperature variation during transient operation. Moreover, the reactant utilization controllers can avoid component fracture or degradation owing to fuel starvation under dynamic operation. The process can be approximated by two first order transfer functions. It can help in the design of more complex control systems in the future if necessary, with embedded process models, such as model predictive control. Results in the simulation environment are preparatory to the programming phase of an actual controller in real-world applications.

Inconsistency analysis and power allocation of the stack in multi-stack solid oxide fuel cell system

Performance Analysis of Flat-chip Solid Oxide Fuel Cells with Discrete Interconnector Designs

Experimental Study on High-Efficiency Microtubular Solid Oxide Fuel Cell Stacks Using Various Fuels

Power Adaptive Allocation Strategy for Multi-stack Fuel Cell Performance

A Power Allocation Method for Multistack PEMFC System Considering Fuel Cell Performance Consistency

Increment-oriented online power distribution strategy for multi-stack proton exchange membrane fuel cell systems aimed at collaborative performance enhancement

Degradation Analysis and Durability Improvement for Sofc 1-Cell Stack

A Method to Study the Intake Consistency of the Dual-Stack Polymer Electrolyte Membrane Fuel Cell System under Dynamic Operating Conditions

Transient Thermomechanical Analysis of a Solid Oxide Fuel Cell Stack Based on 3D Multiphysical Field Model

Anode-Versus Cathode-Supported Solid Oxide Fuel Cell: Effect of Cell Design on the Stack Performance

Improvement on Durability and Thermal Cycle Performance for Solid Oxide Fuel Cell Stack with External Manifold Structure

Thermal Management of Bypass Valves for Temperature Difference Elimination in a 5 Kw Multi-Stack Solid Oxide Fuel Cell System

Online Control and Power Coordination Method for Multistack Fuel Cells System Based on Optimal Power Allocation

Thermal Stress in Full-Size Solid Oxide Fuel Cell Stacks by Multi-Physics Modeling

Investigations on Single Chamber Solid Oxide Fuel Cells: from Single Cell to Micro-Stack

Transient Thermomechanical Analysis of a 1 Kw Solid Oxide Fuel Cell Stack Based on 3D Multiphysical Field Model

Dynamic modeling of reversible solid oxide cell stack and control strategy development

The Uniformity and Consistency Analysis of a Fuel Cell Stack with Multipoint Voltage-Monitoring Method

The Recent Progress of Planar Solid Oxide Fuel Cell Stack

Performance evaluation of a solid oxide fuel cell multi-stack combined heat and power system with two power distribution strategies

A multiphysics fully coupled modeling tool for the design and operation analysis of planar solid oxide fuel cell stacks