Abstract:Vortex generator (VG) is a passive flow control technology, which can effectively inhibit flow separation. Recently, significant research efforts have been devoted to the study on the application of VG in airfoil, wing/blade and aircraft flow separation inhibition. However, the research on the variable height distribution of VG along the wingspan still lacks. This study focuses on the experimental investigation of the influence of variable height distribution of ramp VG on aerodynamic characteristics. First, VG was designed, such that it was composed of two parts, one fixed region and one deformed region, which allowed for height modification. The height of VGs along the wingspan presented equal-height, triangular and trapezoidal distribution, forming a total of 15 VG layouts. Then, the connection mode of the model, the change of angle of attack and the collection and processing of aerodynamic data were introduced. Finally, a wind tunnel experiment was performed to investigate the influence of height distribution of VG on aerodynamic characteristics of wing. The experimental results show that: (1) the height distribution of the three types of VGs could inhibit the stall flow and improve the aerodynamic performance of the wing; (2) "Triangular translation 3" and "Trapezoidal translation 2" were the best layouts, both of which could increase the maximum lift coefficient, delay stall, and significantly increase the lift-to-drag ratio at high angle of attack; (3) the influence of VG height and position factors on wing stall characteristics was analyzed by using the rough set theory, and the key position information of VG arrangement was provided. This study indicates that the variable height distribution is obviously better than the equal height distribution, which can provide ideas and references for the active control of variable height distribution of VGs.

Numerical study on improving the hydrodynamic performance of three-dimensional unsteady hydrofoil through vortex generators

Research on the Effect of Vortex Generators on Controlling Flow Separation of Hydrofoil

Study On Vortex Generators For Control Of Attached Cavitation

Large Eddy Simulation Investigation of Micro-Vortex Generator Control Effect on Early Stage Sheet Cavitation

Numerical and Experimental Research of Flow Control on an NACA 0012 Airfoil by Local Vibration

Control Effect of Micro Vortex Generators on Leading Edge of Attached Cavitation

Control Effect of Micro Vortex Generators on Attached Cavitation Instability

Parametric optimization of vortex generator configuration for flow control in an intake duct for waterjet propulsion

Large Eddy Simulation of Micro Vortex Generator-Controlled Cavitation Across Multiple Stages

Experimental and Numerical Investigation of a Novel Vortex Reducer in a Co-Rotating Cavity of Aeroengines

10.1063/5.0021162.4

Effect of branch-like structures created by vortex generators on cavitation dynamics at high angle of attack

Numerical study on a novel flapping-foil energy harvester with 2D vortex generator

Experimental investigation of the influence of micro vortex generator on the bubble cavitation around a hydrofoil

Method of Variable-Depth Groove on Vortex and Cavitation Suppression for a NACA0009 Hydrofoil with Tip Clearance in Tidal Energy

The effect of vortex generators on the hydrodynamic performance of a submarine at a high angle of attack using a multi-objective optimization and computational fluid dynamics

Numerical Study of Tip Leakage Vortex Around a NACA0009 Hydrofoil

Effect of vortex generator spanwise height distribution pattern on aerodynamic characteristics of a straight wing

Numerical Investigation on the Effect of Asymmetry of Flow Velocity on the Wake Vortex of Hydrofoils

Effects of Microvortex Generators on Cavitation Erosion by Changing Periodic Shedding into New Structures

Numerical investigation of thermo-hydraulic performance of perforated rectangular and sinusoidal vortex generators in a double-pipe heat exchanger