Abstract:This paper is an extension of the author's recent research in which only buck converters were analyzed. Similar analysis can be equally applied to other types of converters. In this paper, a unified model is proposed for buck, boost, and buck–boost converters under peak or average current mode control to predict the occurrence of subharmonic oscillation. Based on the unified model, the associated stability conditions are derived in closed forms. The same stability condition can be applied to buck, boost, and buck–boost converters. Based on the closed‐form conditions, the effects of various converter parameters including the compensator poles and zeros on the stability can be clearly seen, and these parameters can be consolidated into a few ones. High‐order compensators such as type‐II and PI compensators are considered. Some new plots are also proposed for design purpose to avoid the instability. The instability is found to be associated with large crossover frequency. A conservative stability condition, agreed with the past research, is derived. The effect of the voltage loop ripple on the instability is also analyzed. Copyright © 2014 John Wiley & Sons, Ltd. A unified model is proposed for buck, boost, and buck–boost converters under peak or average current mode control to predict the occurrence of subharmonic oscillation. Based on the unified model, the associated stability conditions are derived. The effects of various converter parameters including the compensator poles and zeros on the stability can be clearly seen, and these parameters can be consolidated into a few ones. High‐order compensators such as type‐II and PI compensators are considered. The effect of the voltage loop ripple on the instability is also analyzed.

Subharmonic Analysis for Buck Converters With Constant On-Time Control and Ramp Compensation

A 2mhz Constant-Frequency AOT V-2 Buck Converter with Adaptive Dead Time Control for Data Centers

Analysis of Buck Converter with Digital Virtual Peak Voltage Control

Study of Bi-Directional Buck-Boost Converter with Different Control Methods

Analysis and Design of Sliding Mode Control for Ac Signal Power Amplifier

A 2.5 MHz, 6 A Ripple-Based Adaptive On-Time Controlled Buck Converter with Pseudo Triangular Ramp Compensation

Design Considerations of Soft-Switched Buck PFC Converter With Constant On-Time (COT) Control

A Voltage Ripple Compensation Method for Constant On-Time Buck Converter

Analysis Of A Time-Length Compensation Algorithm For Elimination Of Subharmonic Oscillation And Application In A Digitally Controlled Primary-Side Regulation Flyback Converter

Bifurcation Boundary Conditions for Switching DC-DC Converters Under Constant On-Time Control

A time-length compensation algorithm for sub-harmonic oscillation elimination in digital controlled primary-side regulation flyback converter

Unified subharmonic oscillation conditions for peak or average current mode control

Analysis and Control of Period-Doubling Bifurcation in Buck Converters Using Harmonic Balance

Design and analysis of state-constrained nonlinear finite-time control algorithm with application to buck converter

Accurate Loop Gain Model of Ripple-Based Constant On-Time Controlled Buck Converters

An Inductance-Variation-Insensitive Buck Converter Using a Dynamic Ramp Compensation With Slope Sensing Technique

Continuous Adaptive Finite-Time Sliding Mode Control for Fractional-Order Buck Converter Based on Riemann-Liouville Definition

Design-oriented fast response voltage mode buck converter with adaptive ramp control

Harmonic Analysis of Sliding-Mode-Controlled Buck Converters Imposed by Unmodeled Dynamics of Hall Sensor

A 10 MHz Ripple-Based On-Time Controlled Buck Converter with Dual Ripple Compensation

Modeling Analysis of Superbuck Converter in Dual-Loop Competition Control