Abstract:Silicon (Si) has been considered as the most potential anode material for next-generation high-energy density lithium-ion batteries (LIBs) because of its extremely high theoretical capacity. However, the performance deterioration caused by volume change and low electrical conductivity of active Si particles greatly limit its commercial use. Here, we designed a nonstoichiometric TiOx-coated Si anode with a litchi-like structure, in which Si–Ti and Si–O dual bonds are expected to form between the Si core and TiOx shell. This unique structure plays a major role in preventing the volume expansion and improving the electrical conductivity of the Si anode. The as-prepared TiOx-coated Si anode could exhibit excellent cycling stability after 1000 cycles at 1000 mA g–1 with a relatively small capacity decay rate of ∼0.04% per cycle, which can be comparable to most of the modified Si anodes in references. This strategy of surface regulating on the Si anode could be extended to other electrodes with large volume expansion during cycling in LIBs for achieving competitive electrochemical properties.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c10418?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c10418</a>.Phases of different titanium oxides; SEM, TEM, HAADF STEM, and HRTEM images; XPS spectrum of pristine Si particles; CV curves of different samples; initial capacities and initial Coulombic efficiencies; galvanostatic discharge/charge curves; prolonged cycle life and Coulombic efficiencies; reversible capacity values; fitting data of impedance parameters; cycling performance data of recent literatures and the present work; and FT-IR spectra (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10418/suppl_file/am0c10418_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Tuning Inactive Phases in Si–Ti–B Ternary Alloy Anodes to Achieve Stable Cycling for High-Energy-Density Lithium-Ion Batteries

Titanium Monoxide-Stabilized Silicon Nanoparticles with a Litchi-like Structure as an Advanced Anode for Li-ion Batteries

Stabilizing the Bulk-Phase and Solid Electrolyte Interphase of Silicon Microparticle Anode by Constructing Gradient-Hierarchically Ordered Conductive Networks

Nanostructuring and Alloying of Si-Based Anode Materials

Tailoring Stress and Ion-Transport Kinetics Via a Molecular Layer Deposition-Induced Artificial Solid Electrolyte Interphase for Durable Silicon Composite Anodes

In-situ synthesis of Si@G@TiC double protective layer structure for enhancing cycling stability of lithium-ion batteries

Surface regulation of Si composite anode via synergistic coupling and Ti C bond for stable cycling lithium-ion battery

Micrometer‐Sized SiMg y O x with Stable Internal Structure Evolution for High‐Performance Li‐Ion Battery Anodes

Hollow Structured Silicon Anodes with Stabilized Solid Electrolyte Interphase Film for Lithium-Ion Batteries

Cycle-stable Si-based composite anode for lithium-ion batteries enabled by the synergetic combination of mixed lithium phosphates and void-preserving F-doped carbon

Si/Ti3SiC2 Composite Anode with Enhanced Elastic Modulus and High Electronic Conductivity for Lithium-Ion Batteries

A Yolk-Shell Design for Stabilized and Scalable Li-Ion Battery Alloy Anodes.

BiSbSi: A New Ternary Layered Si-based Anode for Li-ion Batteries with High Performance

A simple and effective approach to relieve stress and enhance cyclability of Si-based materials toward high-energy lithium-ion batteries

Boosting the Cycling Stability of Li Si Alloy Microparticles Through Electroless Copper Deposition

Constructing a Stable Integrated Silicon Electrode with Efficient Lithium Storage Performance through Multidimensional Structural Design

Ternary Si–SiO–Al Composite Films as High-Performance Anodes for Lithium-Ion Batteries

“Nano-Skeleton” Si-SiOx@C Anodes towards Highly Stable Lithium-ion Batteries

Dramatic improvement enabled by incorporating thermal conductive TiN into Si-based anodes for lithium ion batteries

Mechanically Reinforced Localized Structure Design to Stabilize Solid-Electrolyte Interface of the Composited Electrode of Si Nanoparticles and TiO2 Nanotubes

Adding Metal Carbides to Suppress the Crystalline Li15Si4 Formation: A Route Toward Cycling Durable Si-Based Anodes for Lithium-Ion Batteries.