Abstract:Micro- and nanoparticles of plastic waste are considered emerging pollutants with significant environmental and health impacts at high concentrations or prolonged exposure time. Here we report the synthesis and characterization of a known metal-organic framework (MOF) using terephthalic acid (TPA) recovered from the hydrolysis of polyethylene terephthalate (PET) bottle waste. This approach adds value to the existing large amounts of bottle waste in the environment. Fully characterized zinc-TPA MOF (MOF-5) was used for the extraction and removal of engineered polyvinyl chloride (PVC) and polymethylmethacrylate (PMMA) nanoparticles from water with a high efficiency of 97% and 95%, respectively. Kinetic and isotherm models for the adsorption of polymer nanoparticles (PNPs) on the MOF surface were investigated to understand the mechanism. The Qmax for PVC and PMMA NPs were recorded as 56.65 mg/g and 33.32 mg/g, respectively. MOF-5 was characterized before and after adsorption of PNPs on the surface of MOF-5 using a range of techniques. After adsorption, the MOF-5 was successfully regenerated and reused for the adsorption and removal of PNPs, showing consistent results for five adsorption cycles with a removal rate of 83–85%. MOF-5 was characterized before and after adsorption of PNPs on the surface using a range of techniques. The MOF-5 with PNPs on the surface was successfully regenerated and reused for the adsorption and removal of polymer nanoparticles, showing consistent results for five extraction cycles. As a proof of concept, MOF-5 was also used to remove plastic particles from commercially available body scrub gel solutions. Such methods and materials are needed to mitigate the health hazards caused by emerging micro- and nanoplastic pollutants in the environment.

In situ growth of MIL-101 (Fe) on waste PET plastic slices for effective arsenic removal

Efficient Adsorption Removal of Anionic Dyes by Waste PET-derived MIL-101(Cr)

Optimized scalable synthesis and granulation of MIL-88B(Fe) for efficient arsenate removal

Efficient treatment of smelting wastewater: 3D nickel foam @MOF shatters the previous limitation, enabling high-throughput selective capture of arsenic to form non-homogeneous nuclei

Superior removal of inorganic and organic arsenic pollutants from water with MIL-88A(Fe) decorated on cotton fibers

3D-Printed MOFs/Polymer Composite as a Separatable Adsorbent for the Removal of Phenylarsenic Acid in the Aqueous Solution

Insight into the purification of arsenic-contaminated acid water by metal–organic framework MIL-53(Fe) with sulfite: The generation and effect of Fe(IV)

Green synthesis and evaluation of an iron-based metal-organic framework MIL-88B for efficient decontamination of arsenate from water

Conversion of PET Bottle Waste into a Terephthalic Acid-Based Metal-Organic Framework for Removing Plastic Nanoparticles from Water

Design and synthesis of biopolymer-derived porous graphitic carbon covered iron-organic frameworks for depollution of arsenic from waters

Wood aerogels decorated amino-functionalized MIL-101(Cr) as efficient filter for multistage purification of wastewater

In-situ Forming Sub-2 Nm Hydrous Iron Oxide Particles in MOFs for Deep-Treatment and High Anti-Interference in Arsenic Removal

Effective removal of arsenite from water using polylactic acid ZIF-8 biocomposite nanofiber

One-step construction of hierarchical porous channels on electrospun MOF/polymer/graphene oxide composite nanofibers for effective arsenate removal from water

Tuned bimetallic MOFs with balanced adsorption and non-radical oxidizing activities for efficient removal of arsenite

Adsorption Behavior and Mechanism of Modified Fe-based Metal–organic Framework for Different Kinds of Arsenic Pollutants

One-Pot synthesis of MWCNTs/Fe-MOFs nanocomposites for enhanced adsorption of As(V) in aqueous solution

Waste treats waste: Facile fabrication of porous adsorbents from recycled PET and sodium alginate for efficient dye removal

High‐Performance Functional Fe‐MOF for Removing Aflatoxin B1 and Other Organic Pollutants

Defective metal–organic framework derived from the waste plastic bottles for rapid and efficient nitroimidazole antibiotics removal

Sustainable conversion of polyethylene plastic bottles into terephthalic acid, synthesis of coated MIL-101 metal–organic framework and catalytic degradation of pollutant dyes