Conversion of PET Bottle Waste into a Terephthalic Acid-Based Metal-Organic Framework for Removing Plastic Nanoparticles from Water

Chingakham Chinglenthoiba,Gomathi Mahadevan,Jiawei Zuo,Thiruchelvam Prathyumnan,Suresh Valiyaveettil

DOI: https://doi.org/10.3390/nano14030257

IF: 5.3

2024-01-24

Nanomaterials

Abstract:Micro- and nanoparticles of plastic waste are considered emerging pollutants with significant environmental and health impacts at high concentrations or prolonged exposure time. Here we report the synthesis and characterization of a known metal-organic framework (MOF) using terephthalic acid (TPA) recovered from the hydrolysis of polyethylene terephthalate (PET) bottle waste. This approach adds value to the existing large amounts of bottle waste in the environment. Fully characterized zinc-TPA MOF (MOF-5) was used for the extraction and removal of engineered polyvinyl chloride (PVC) and polymethylmethacrylate (PMMA) nanoparticles from water with a high efficiency of 97% and 95%, respectively. Kinetic and isotherm models for the adsorption of polymer nanoparticles (PNPs) on the MOF surface were investigated to understand the mechanism. The Qmax for PVC and PMMA NPs were recorded as 56.65 mg/g and 33.32 mg/g, respectively. MOF-5 was characterized before and after adsorption of PNPs on the surface of MOF-5 using a range of techniques. After adsorption, the MOF-5 was successfully regenerated and reused for the adsorption and removal of PNPs, showing consistent results for five adsorption cycles with a removal rate of 83–85%. MOF-5 was characterized before and after adsorption of PNPs on the surface using a range of techniques. The MOF-5 with PNPs on the surface was successfully regenerated and reused for the adsorption and removal of polymer nanoparticles, showing consistent results for five extraction cycles. As a proof of concept, MOF-5 was also used to remove plastic particles from commercially available body scrub gel solutions. Such methods and materials are needed to mitigate the health hazards caused by emerging micro- and nanoplastic pollutants in the environment.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry

What problem does this paper attempt to address?

This paper aims to address the issue of plastic nanoparticles (PNPs) polluting water bodies. Specifically, the research team developed a method to convert polyethylene terephthalate (PET) bottle waste into terephthalic acid (TPA) through hydrolysis, and subsequently synthesized metal-organic framework (MOF) materials. These MOF materials were used to efficiently extract and remove polyvinyl chloride (PVC) and polymethyl methacrylate (PMMA) nanoparticles from water. Experimental results showed that MOF-5 achieved removal efficiencies of 97% and 95% for PVC and PMMA nanoparticles, respectively. Additionally, the study explored adsorption kinetics and isotherm models to understand the mechanism of polymer nanoparticle adsorption on the MOF surface, and demonstrated that MOF-5 could maintain stable removal performance after multiple cycles of use. This method provides a potential solution to reduce the health hazards posed by microplastic and nanoplastic pollutants in the environment.