Abstract:A multi-modulus architecture based on the radix-8 Booth encoding of a modulo (2n − 1) multiplier, a modulo (2n) multiplier, and a modulo (2n + 1) multiplier is proposed in this paper. It uses the original single circuit and shares many common circuit characteristics with a small extra circuit to carry out multi-modulus operations. Compared with a previous radix-4 study, the radix-8 architecture can increase the modulation multiplication encoding selection from three codes to four codes. This reduces the use of partial products from ⌊n/2⌋ to ⌊n/3⌋ + 1, but it increases the operation complexity for multiplication by three circuits. A hard multiple generator (HMG) is used to address this problem. Two judgment signals in the multi-modulus circuit can be used to perform three operations of the modulo (2n − 1) multiplier, modulo (2n) multiplier, and modulo (2n + 1) multiplier at the same time. The weighted representation is used to reduce the number of partial products. Compared with previously reported methods in the literature, the proposed approach can achieve better performance by being more area-efficient, being faster, consuming low power, and having a lower area-delay product (ADP) and power-delay product (PDP). With the multi-modulus HMG, the proposed modified architecture can save 34.48–55.23% of hardware area. Compared with previous studies on the multi-modulus multiplier, the proposed architecture can save 22.78–35.46%, 4.12–11.15%, 12.59–24.73%, 27.88–38.88%, and 20.49–27.85% of hardware area, delay time, dissipation power, ADP, and PDP, respectively. Xilinx field programmable gate array (FPGA) Vivado 2019.2 tools and the Verilog hardware description language are used for synthesis and implementation. The Xilinx Artix-7 XC7A35T-CSG324-1 chipset is adopted to evaluate the performance.

An Area and Energy Efficient Serial-Multiplier

High Quality Multiplier Design Based on Improved Circuits

A Reconfigurable Multiplier for Signed Multiplications with Asymmetric Bit-Widths.

Design of low-power and high-speed multiplier

A New Design for Array Multiplier with Trade off in Power and Area

Low Power Shift and Add Multiplier Design

Area-Power-Delay-Efficient Multi-Modulus Multiplier Based on Area-Saving Hard Multiple Generator Using Radix-8 Booth-Encoding Scheme on Field Programmable Gate Array

Design of an Area-Effcient Million-Bit Integer Multiplier Using Double Modulus Ntt

Area, Delay, and Energy-Efficient Full Dadda Multiplier

Design and Implementation of Area Efficient Low Latency Radix-8 Multiplier on FPGA

Low-Power, High-Speed, and Area-Efficient Multiplier Based On the PTL Logic Style

An 8-Bit Radix-4 Non-Volatile Parallel Multiplier

Design of a Reformed Array Logic Binary Multiplier for High-Speed Computations

A Scalable Montgomery Modular Multiplication Architecture with Low Area-Time Product Based on Redundant Binary Representation

Energy-Efficient and Fast Memristor-based Serial Multipliers Applicable in Image Processing

Efficient implementation of signed multipliers on FPGAs

Efficient modular hybrid adders and Radix-4 booth multipliers for DSP applications

Energy efficient approximate multipliers compatible with error-tolerant application

Low-Latency Scalable Modular Multiplier Without Montgomery Algorithm

Area-Efficient Modular Reduction Structure and Memory Access Scheme for NTT

A Low Area ASIC Implementation of 272 Bit Multiplier