Abstract:Despite dominating the current commercial energy storage landscape, Li-ion batteries are fast approaching their theoretical limit. Meanwhile, Lithium Sulphur (Li-S) batteries, owing to their ultrahigh theoretical energy density of about 2600 Whkg -1 , low-cost, Earth-abundant, and environmentally friendly sulfur (S) cathode, are seen as promising replacements to realize energy densities beyond 500 Whkg -1 . Despite these advantages, the large-scale implementation of Li-S technology has been stymied due to several issues, one of the most deleterious of them is the dissolution and shuttling of polysulfide intermediates during cycling resulting in severe self-discharge, lowered S utilization and coulombic efficiency. Over the past decades, substantial amount of research towards mitigating 'polysulfide shuttling' shuttling has been focused on cathodic modification strategies such as infiltration of S in porous carbon, metal oxide or conducting polymer scaffold matrix which retard the mobility and loss of active material. However, such simple confinement strategies have been shown to be lacking over long cycling due to the relatively weak intermolecular interactions between the host and polysulfide molecules. An effective solution comes in the form of engineering 'sulfiphilic' materials that adsorb polysulfide species. For example, surface modification of cathodes with rGO and functionalized carbon species have shown success in reducing the redox shuttling. However, these approaches require elaborate preparation and hence, are limited in their practical usage. To overcome this, we propose a facile approach to improve cell performance via incorporation of functionalized graphenic species in the Li-S electrolyte. In this work, we have probed the impact of using tailored single-layer, heteroatom-doped graphene as electrolyte additives. We have studied the impact of their morphology and functionalization on the electrochemical performance of the cell. Results show a marked improvement in the discharge capacity and a high capacity retention of 84% over 105 cycles at 0.2 C cycling rate. The GCD cycle analysis showed an improvement in first cycle discharge plateau suggesting improved S utilization which was further substantiated by extensive postmortem analysis and polysulfide adsorption testing. Further, the electrolyte-modified cells showed an impressive three-fold and two-fold improvement in capacity at 1C and 2C cycling rates, respectively. These results demonstrated that tailored heteroatom-doped graphene in the form of electrolyte additive is an effective strategy to improve electrochemical performance via enhanced polysulfide encapsulation, cell conductivity and anode stabilization. Finally, we will present the effect of heteroatom-doped graphenic species on mitigation of polysulfide shuttling and cell performance when they are incorporated in the gel electrolyte system.

Optimizing Electrocatalysis and Domain Effects of Graphene on Li2S Cathodes for High‐Efficient‐Stable Li─S Batteries

Selective Adsorption and Electrocatalysis of Polysulfides Through Hexatomic Nickel Clusters Embedded in N-Doped Graphene Toward High-Performance Li-S Batteries

Graphene-Li2S-Carbon Nanocomposite for Lithium-Sulfur Batteries

Graphene/MXene fibers-enveloped sulfur cathodes for high-performance Li-S batteries

3D graphene framework supported Li2S coated with ultra-thin Al2O3 films: binder-free cathodes for high-performance lithium sulfur batteries

Vertical-Aligned Li2s-Graphene Encapsulated Within A Carbon Shell As A Free-Standing Cathode For Lithium-Sulfur Batteries

Sulfur-infiltrated Graphene-Based Layered Porous Carbon Cathodes for High-Performance Lithium-Sulfur Batteries.

Li2s@C Composite Incorporated into 3d Reduced Graphene Oxide As A Cathode Material for Lithium-Sulfur Batteries

Burning Lithium in CS2 for High-Performing Compact Li2S–graphene Nanocapsules for Li–S Batteries

Lithiothermic‐Synchronous Construction of Mo‐Li 2 S‐Graphene Nanocomposites for High‐Energy Li 2 S//SiC Battery

Insight into the Anchoring and Catalytic Effects of VO2 and VS2 Nanosheets As Sulfur Cathode Hosts for Li-S Batteries

Polarity-induced precipitation of S/Li2S confined into N and S co-doped porous graphene layered matrix for lithium sulfur batteries

High‐Performance Lithium‐Sulfur Batteries with a Self‐Supported, 3D Li2S‐Doped Graphene Aerogel Cathodes

High-capacity Li2S–graphene Oxide Composite Cathodes with Stable Cycling Performance

Graphene-enhanced sulfur cathode with high interface stability in Li-S batteries

Incorporating Heteroatom-Doped Graphene in Electrolyte for High-Performance Lithium-Sulfur Batteries

Co‐recrystallization Induced Self‐catalytic Li2S Cathode Fully Interfaced with Sulfide Catalyst Toward a High‐performance Lithium‐free Sulfur Battery

Cobalt-induced Highly-electroactive Li 2 S Heterostructured Cathode for Li-S Batteries

Boosting Redox Kinetics of Sulfur Electrochemistry by Manipulating Interfacial Charge Redistribution and Multiple Spatial Confinement in Mott–Schottky Electrocatalysts

The Reduction of Graphene Oxide by H2s and Its Potential Application in Li-S Battery

Inverse Fabrication of Li 2 S‐Nanocrystals@Doped‐Carbon Loaded on Woven Carbon Fibers to Spatial Structure Cathodes for High‐Stable Lithium–Sulfur Batteries