Abstract:Despite dominating the current commercial energy storage landscape, Li-ion batteries are fast approaching their theoretical limit. Meanwhile, Lithium Sulphur (Li-S) batteries, owing to their ultrahigh theoretical energy density of about 2600 Whkg -1 , low-cost, Earth-abundant, and environmentally friendly sulfur (S) cathode, are seen as promising replacements to realize energy densities beyond 500 Whkg -1 . Despite these advantages, the large-scale implementation of Li-S technology has been stymied due to several issues, one of the most deleterious of them is the dissolution and shuttling of polysulfide intermediates during cycling resulting in severe self-discharge, lowered S utilization and coulombic efficiency. Over the past decades, substantial amount of research towards mitigating 'polysulfide shuttling' shuttling has been focused on cathodic modification strategies such as infiltration of S in porous carbon, metal oxide or conducting polymer scaffold matrix which retard the mobility and loss of active material. However, such simple confinement strategies have been shown to be lacking over long cycling due to the relatively weak intermolecular interactions between the host and polysulfide molecules. An effective solution comes in the form of engineering 'sulfiphilic' materials that adsorb polysulfide species. For example, surface modification of cathodes with rGO and functionalized carbon species have shown success in reducing the redox shuttling. However, these approaches require elaborate preparation and hence, are limited in their practical usage. To overcome this, we propose a facile approach to improve cell performance via incorporation of functionalized graphenic species in the Li-S electrolyte. In this work, we have probed the impact of using tailored single-layer, heteroatom-doped graphene as electrolyte additives. We have studied the impact of their morphology and functionalization on the electrochemical performance of the cell. Results show a marked improvement in the discharge capacity and a high capacity retention of 84% over 105 cycles at 0.2 C cycling rate. The GCD cycle analysis showed an improvement in first cycle discharge plateau suggesting improved S utilization which was further substantiated by extensive postmortem analysis and polysulfide adsorption testing. Further, the electrolyte-modified cells showed an impressive three-fold and two-fold improvement in capacity at 1C and 2C cycling rates, respectively. These results demonstrated that tailored heteroatom-doped graphene in the form of electrolyte additive is an effective strategy to improve electrochemical performance via enhanced polysulfide encapsulation, cell conductivity and anode stabilization. Finally, we will present the effect of heteroatom-doped graphenic species on mitigation of polysulfide shuttling and cell performance when they are incorporated in the gel electrolyte system.

High‐Performance Lithium‐Sulfur Batteries with a Self‐Supported, 3D Li2S‐Doped Graphene Aerogel Cathodes

A High‐energy‐density Long‐cycle Lithium–sulfur Battery Enabled by 3D Graphene Architecture

Dual‐Confined Flexible Sulfur Cathodes Encapsulated in Nitrogen‐Doped Double‐Shelled Hollow Carbon Spheres and Wrapped with Graphene for Li–S Batteries

Graphene-Li2S-Carbon Nanocomposite for Lithium-Sulfur Batteries

3D Dual-Confined Sulfur Encapsulated in Porous Carbon Nanosheets and Wrapped with Graphene Aerogels As A Cathode for Advanced Lithium Sulfur Batteries

3D Holey Graphene/Polyacrylonitrile Sulfur Composite Architecture for High Loading Lithium Sulfur Batteries

Carbon/Sulfur Aerogel with Adequate Mesoporous Channels as Robust Polysulfide Confinement Matrix for Highly Stable Lithium–Sulfur Battery

Dual-Phase Lithium Metal Anode Containing a Polysulfide-Induced Solid Electrolyte Interphase and Nanostructured Graphene Framework for Lithium-Sulfur Batteries.

Self-assembled N-graphene nanohollows enabling ultrahigh energy density cathode for Li-S batteries

Three-Dimensionally Hierarchical Graphene Based Aerogel Encapsulated Sulfur as Cathode for Lithium/Sulfur Batteries

Graphene/MXene fibers-enveloped sulfur cathodes for high-performance Li-S batteries

Free-standing integrated cathode derived from 3D graphene/carbon nanotube aerogels serving as binder-free sulfur host and interlayer for ultrahigh volumetric-energy-density lithium sulfur batteries

Integration of nickel phosphide nanodot-enriched 3D graphene-like carbon with carbon fibers as self-supported sulfur hosts for advanced lithium sulfur batteries

Dense Graphene Monolith for High Volumetric Energy Density Li–S Batteries

Incorporating Heteroatom-Doped Graphene in Electrolyte for High-Performance Lithium-Sulfur Batteries

Direct Laser-Printing of Molecularly-Dispersed Strongly-Anchored Sulfur-Graphene Layers as High-Performance Cathodes for Polysulfide Shuttle Effect-Inhibited Lithium-Sulfur Batteries

A Graphene Foam Electrode with High Sulfur Loading for Flexible and High Energy Li-S Batteries

Interfacial Engineering and Coupling of MXene/Reduced Graphene Oxide/C3N4 Aerogel with Optimized d‐Band Center as a Free‐Standing Sulfur Carrier for High‐Performance Li‐S Batteries

Ultradispersed titanium dioxide nanoparticles embedded in a three-dimensional graphene aerogel for high performance sulfur cathodes

High Sulfur Loading Composite Wrapped By 3d Nitrogen-Doped Graphene As A Cathode Material For Lithium-Sulfur Batteries

Strategy for practically constructing high-capacity sulfur cathode by combining sulfur-hierarchical porous graphitic carbon composite with surface modification of polydopamine