Abstract:Radiation detectors based on Cadmium Zinc Telluride (CZT) compounds are becoming popular solutions thanks to their high detection efficiency, room temperature operation, and to their reliability in compact detection systems for medical, astrophysical, or industrial applications. However, despite a huge effort to improve the technological process, CZT detectors' full potential has not been completely exploited when both high spatial and energy resolution are required by the application, especially at low energies (<10 keV), limiting their application in energy-resolved photon counting (ERPC) systems. This gap can also be attributed to the lack of dedicated front-end electronics which can bring out the best in terms of detector spectroscopic performances. In this work, we present the latest results achieved in terms of energy resolution using SIRIO, a fast low-noise charge sensitive amplifier, and a linear-array pixel detector, based on boron oxide encapsulated vertical Bridgman-grown B-VB CZT crystals. The detector features a 0.25-mm pitch, a 1-mm thickness and is operated at a −700-V bias voltage. An equivalent noise charge of 39.2 el. r.m.s. (corresponding to 412 eV FWHM) was measured on the test pulser at 32 ns peaking time, leading to a raw resolution of 1.3% (782 eV FWHM) on the 59 keV line at room temperature (+20 °C) using an uncollimated 241Am, largely improving the current state of the art for CZT-based detection systems at such short peaking times, and achieving an optimum resolution of 0.97% (576 eV FWHM) at 1 μs peaking time. The measured energy resolution at the 122 keV line and with 1 μs peaking time of a 57Co raw uncollimated spectrum is 0.96% (1.17 keV). These activities are in the framework of an Italian collaboration on the development of energy-resolved X-ray scanners for material recycling, medical applications, and non-destructive testing in the food industry.

Hybrid pixel detector development for the linear collider vertex detector

Pixel detector R&D for the Compact Linear Collider

Technologies for Future Vertex and Tracking Detectors at CLIC

R&D for the CLIC Vertex and Tracking detectors

Vertex-Detector R&D for CLIC

First Results with Prototype ISIS Devices for ILC Vertex Detector

A Full Functional Monolithic Active Pixel Sensor Prototype for the CEPC Vertex Detector

Silicon detector R$\&$D for the future Electron-Ion Collider

Development of CMOS Pixel Sensors fully adapted to the ILD Vertex Detector Requirements

Forward silicon vertex/tracking detector design and R$\&$D for the future Electron-Ion Collider

Development of Fast and High Precision CMOS Pixel Sensors for an ILC Vertex Detector

Design and Performance of HV CMOS Sensors for Future Colliders by the RD50 Collaboration

Beyond the CMOS sensors: the DoTPiX pixel concept and technology for the International Linear Collider A

Latest vertex and tracking detector developments for the future Electron-Ion Collider

CMS Pixel Detector Upgrade

Characterization of the first prototype CMOS pixel sensor developed for the CEPC vertex detector

Subpixel Mapping and Test Beam Studies with a HV2FEI4v2 CMOS-Sensor-Hybrid Module for the ATLAS Inner Detector Upgrade

M.i.p. detection performances of a 100 us read-out CMOS pixel sensor with digitised outputs

R&D Paths of Pixel Detectors for Vertex Tracking and Radiation Imaging

Advances in High-Energy-Resolution CdZnTe Linear Array Pixel Detectors with Fast and Low Noise Readout Electronics

Pixel front-end development in 65 nm CMOS technology