Abstract:There are many applications for glass-to-glass bonding, such as manufacturing optical devices, electronic components, and microsystem applications. This article presents a simple and effective method for glass-to-glass bonding using laser modification with Ti/Cu/Ti/TiO2 thin films. Ti/Cu/Ti thin films were prepared on glass using magnetron sputtering and then exposed to the atmosphere for 30 min at room temperature for preoxidation to obtain Ti/Cu/Ti/TiO2 thin films. The TiO2 thin film was intentionally formed to improve the bonding quality. To analyze the bonding mechanism, the energy dispersive spectroscopy (EDS) and X-ray photoelectron spectra (XPS) analyses studied the microstructural evolution. The results show that Si diffuses from the glass to the thin films by laser irradiation. The laser beam penetrated the glass and was directly absorbed by the TiO2 thin films. Ti diffuses from the oxide thin film toward the glass, forming Ti–Si covalently structured silicate (the main component is TiSi2) in the bonded region. The formation of TiSi2 is the critical process for this laser bonding. Furthermore, the bonding strengths corresponding to different contact pressures applied during the bonding process were compared and analyzed. The results show that the method achieves more robust glass/TiSi2/Ti/Cu/TiSi2/glass bond pairs with tensile strengths up to 14 MPa and low bonding defect density (< 0.05%). Note that this laser bonding technology was processed at room temperature, allowing the use of thermally sensitive materials in device manufacturing. To verify the application potential of the laser bonding technique in 3-D glass packaging, a simple coplanar waveguide (CPW)–through-glass vias (TGVs)–CPW interconnect structure was developed on three-layer glass interposers in this article. The interconnection loss was successfully measured by constructing a three-layer interconnect structure with laser bonding. The results show that the insertion loss can meet the requirements of glass-based microsystem applications.

The bonding between glass and metal

Review of Bonding Technology of Glass to Metal

Diffusion Bonding of a Zr-based Metallic Glass in Its Supercooled Liquid Region

Enhancing Glass-to-Glass Bonding at Room Temperatures Using Laser Surface Modification with Ti/Cu/Ti/TiO2 Thin Films

Interface Behaviors and Mechanical Properties of Diffusion Bonded 45 Steel/additive Manufactured 316L Steel Joints

Traditional and non-traditional machining technology of metallic glass

Characterization, Removal and Evaluation of Oxide Film in the Diffusion Bonding of Zr55Cu30Ni5Al10 Bulk Metallic Glass

Functional metal ions-containing bioactive glass: characteristics, functions and applications

Influence of Oxidation on Structure, Performance, and Application of Metallic Glasses

Research status of joining of ceramics and metals

Brazing of SiO2 ceramic

Review of the Recent Development in Metallic Glass and Its Composites

Research on the interfacial microstructure and mechanical properties of glass/Mg joint prepared by anodic bonding and vacuum diffusion bonding

The connection of glass and metal with a large gap by combining laser soldering and ultrafast laser welding

Sealing of Glass to Metal

TENDENCY AND RESEARCH STATUS ON BRAZING AND DIFFUSION BONDING FOR TITANIUM AS WELL AS ITS ALLOY TO STAINLESS STEEL

The wettability of metallic glasses: a review

Bonding‐Enhanced Interfacial Thermal Transport: Mechanisms, Materials, and Applications

DEVELOPMENTS AND PRESENT SITUATION OF DIFFUSION BONDING OF TITANIUM ALLOY TO OTHER METALS

Designing interfacial chemical bonds towards advanced metal-based energy-storage/conversion materials

Application of laser ablation in adhesive bonding of metallic materials: A review