Abstract:This experimental study investigates thermal rectification via asymmetric far-field thermal radiation on a fused silica slab. An asymmetrical distribution of surface emissivity is created over the device by partially covering the fused silica with a 100 nm thick aluminum film. The slab is subjected to a thermal bias, and when this bias is reversed, a small temperature difference is observed between the different configurations. This temperature difference arises from the difference in emissivity between the aluminum layer and fused silica, resulting in the transfer of thermal energy to the surrounding environment through radiation. Experimental findings are supported by finite element simulations, which not only confirm the measured values but also provide valuable insights into the rectification efficiency of the system. The rectification efficiency is found to be approximately 50% at room temperature for a thermal bias of 140 K. Simulations, which are performed by considering different environmental conditions experienced by the radiation and free convection processes, provide further insight into the underlying thermal rectification mechanism. These simulations consider an environmental temperature of 4 K for thermal radiation and an ambient temperature of 294 K for free convection and reveal an enhanced rectification effect with a rectification efficiency up to 600% when a thermal bias of 195 K is applied. This result emphasizes the significance of considering both convection and radiation in the thermal management and rectification of asymmetric systems. The outcomes of this study further our understanding of the thermal rectification phenomenon. They also show the importance of system asymmetry, emissivity disparities, environmental conditions, and the interplay between convection and radiation. Furthermore, the findings have implications for heat transfer and rectification in asymmetric systems, offering potential applications in areas such as energy harvesting, thermal management, and heat transfer optimization in electronic devices.

Far-field radiative thermal rectification with bulk materials

Far-field radiative thermal rectifier based on nanostructures with vanadium dioxide.

Far-Field Radiative Thermal Rectification Based on Asymmetric Emissivity

A simple radiative thermal diode

Giant radiative thermal rectification using an intrinsic semiconductor film

Thin-Film Radiative Thermal Diode with Large Rectification

Near-field Thermal Diode Based on 2D Gratings

High-rectification near-field radiative thermal diode using Weyl semimetals

Thermal rectification based on thermochromic materials

Fundamental limit to the rectification of near-field heat flow: The potential of intrinsic semiconductor films

Review of thermal rectification experiments and theoretical calculations in 2D materials

A Brief Review on the Recent Experimental Advances in Thermal Rectification at the Nanoscale

Enhancement of thermal rectification effect based on zigzag interfaces in bi-segment thermal rectifier using bulk materials

Ultrahigh Thermal Rectification at Small Temperature Difference Achieved by Near‐Field Thermal Photon Manipulation

Near-field thermal rectification driven by nonreciprocal hyperbolic surface plasmons

Thermal Rectification At The Bimaterial Nanocontact Interface

The design of a thermal rectifier

Phase-change radiative thermal diode

Highly-efficient radiative thermal rectifiers based on near-field gap variations

A Theoretical Paradigm for Thermal Rectification via Phonon Filtering and Energy Carrier Confinement