A high-capacity polyaniline-intercalated layered vanadium oxide for aqueous ammonium-ion batteries

Chunhua Han,Jiao Zhu,Kai Fu,Dan Deng,Wen Luo,Liqiang Mai

DOI: https://doi.org/10.1039/d1cc05677h

IF: 4.9

2022-01-01

Chemical Communications

Abstract:Layered polyaniline intercalated V 2 O 5 with an expanded layer of ∼1.55 nm exhibits an extremely high ammonium storage capacity.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Polyaniline Intercalation Induced Great Enhancement of Electrochemical Properties in Ammonium Vanadate Nanosheets as an Advanced Cathode for High-Performance Aqueous Zinc-Ion Batteries

Yuanxia Li,Yu Liu,Ji Chen,Qiaoji Zheng,Yu Huo,Fengyu Xie,Dunmin Lin

DOI: https://doi.org/10.1016/j.cej.2022.137681

IF: 15.1

2022-06-22

Chemical Engineering Journal

Abstract:Layer-structured ammonium vanadate (NH 4 V 3 O 8 ∙0.5H 2 O) has attracted wide attention as one of the most promising cathode candidates for rechargeable aqueous zinc-ion batteries (AZIBs) due to its tunable two-dimensional (2D) layered structures; however, its sluggish Zn 2+ diffusion dynamics and poor cycling stability inhibit the electrochemical properties of the material. Herein, we design the organic (polyaniline) -inorganic (ammonium vanadate) hybrid cathodes with expanded interlayer spacing by intercalating polyaniline into the interlayer of NH 4 V 3 O 8 ∙0.5H 2 O. Importantly, the interlayer distance of NH 4 V 3 O 8 ∙0.5H 2 O is remarkably enlarged form 7.9 Å to 10.8Å by polyaniline intercalating, offering fast channels for Zn 2+ diffusion. Moreover, the polyaniline-intercalated hybrid material presents weak crystallinity and ultra-thin nanosheets morphology and owns high content of oxygen defect, which endows it with more Zn 2+ active sites to improve the electrochemical kinetics of the electrode material. Benefitting from the above, the obtained organic-inorganic hybrid electrode exhibits excellent electrochemical properties, giving a high initial capacity of 397.5 mAh g −1 at 1 A g −1 and an excellent cycling stability of 300 mAh g −1 at current density of 10 A g −1 with the capacity retention of 95% over 1000 cycles. This study proposes an important guidance for the design of advanced cathodes of aqueous rechargeable zinc-ion batteries by tailoring the morphology and crystal characteristics of the materials.

engineering, chemical, environmental
3D Orbital Electron Tunning and Crystal Engineering Enables High-Capacity Vanadium Oxide for Aqueous Ammonium Ion Batteries

Tzu-Hao Lu,Qiyu Liu,Ang Yi,Hao Liu,Yanxia Yu,Xihong Lu

DOI: https://doi.org/10.1063/5.0221284

2024-01-01

Abstract:Vanadium pentoxide (V2O5) has shown great potential as the electrode for aqueous ammonium ion batteries (AAIBs) owing to its good electrochemical reversibility and high theoretical capacity. However, the electrochemical performance of V2O5 is seriously limited by the weak NH4+ adsorption capability and insufficient active sites of vanadium oxide originated from the unsuitable 3d orbital electron state. Herein, the strategy of a 3d orbital electron tunning and crystal engineering is used to increase the ammonium ion storage capacity of V2O5 electrode. The experimental results show that the modified 3d orbital state of V4+ (t2g1) can effectively increase the active sites of V2O5. Therefore, the as-prepared N-VO exhibits a high specific capacity of 249.3 mA h g−1 at 1.0 A g−1 and 69.5 mA h g−1 at 10.0 A g−1, superior to other reported anode material for AAIBs. Noticeably, the prepared resultant quasi-solid-state ammonium ion battery can display considerable cycling stability with capacity retention of 87.9% after a long cycle life of 10 000 cycles at 1 A g−1 and impressive mechanical flexibility with no capacity decay after cycling at different bending angles.
Polypyrrole intercalated into the interlayer of vanadium oxide hydration boosts NH4+ storage for aqueous ammonium ion batteries

Zilong Zhang,Yifu Zhang,Zhanming Gao,Yanyan Liu,Jiani Gong,Jingjing Sun,Ziyi Feng,Tao Hu,Changgong Meng

DOI: https://doi.org/10.1016/j.est.2024.110623

IF: 9.4

2024-04-01

Journal of Energy Storage

Abstract:Non-metallic ammonium ion (NH4 +) carrier has attracted great interest in aqueous energy storage due to its light molar mass, small hydration radius, mild reaction and unique topological chemical structure. The exploration of cathode materials for aqueous ammonium ion batteries (AAIBs) has become a hot research topic recently. In this work, we design and synthesize polypyrrole-inserted hydrated vanadium pentoxide (PPy/VOH) with boosted NH4 +-storage and use it as a cathode material to produce AAIBs in the first time. By inserting PPy between the layers, the interlayer spacing is enlarged, and the interlayer forces are weakened, and structure of vanadium oxide is stabilized, all greatly improving the NH4 +-storage performance. As expected, PPy/VOH can reach the specific capacity of 169.1 mAh g−1 at 0.5 A g−1, and the specific capacity is maintained at 69 % of the initial value after 5000 cycles. The 3,4,9,10-Perylene-bis(dicarboximide) (PTCDI)//PPy/VOH full cell delivers the specific capacity of 55 mAh g−1 at 0.2 A g−1. This work not only demonstrates the PPy intercalation VOH can improve the NH4 +-storage performance, but also provides a new attempt at the practical application of cathode materials for AAIBs through the intercalation strategy.

energy & fuels
Potassium Ammonium Vanadate with Rich Oxygen Vacancies for Fast and Highly Stable Zn-Ion Storage.

Quan Zong,QianQian Wang,Chaofeng Liu,Daiwen Tao,Jiangying Wang,Jingji Zhang,Huiwei Du,Junfu Chen,Qilong Zhang,Guozhong Cao

DOI: https://doi.org/10.1021/acsnano.1c11169

IF: 17.1

2022-01-01

ACS Nano

Abstract:Vanadium-based materials have been extensively studied as promising cathode materials for zinc-ion batteries because of their multiple valences and adjustable ion-diffusion channels. However, the sluggish kinetics of Zn-ion intercalation and less stable layered structure remain bottlenecks that limit their further development. The present work introduces potassium ions to partially substitute ammonium ions in ammonium vanadate, leading to a subtle shrinkage of lattice distance and the increased oxygen vacancies. The resulting potassium ammonium vanadate exhibits a high discharge capacity (464 mAh g-1 at 0.1 A g-1) and excellent cycling stability (90% retention over 3000 cycles at 5 A g-1). The excellent electrochemical properties and battery performances are attributed to the rich oxygen vacancies. The introduction of K+ to partially replace NH4+ appears to alleviate the irreversible deammoniation to prevent structural collapse during ion insertion/extraction. Density functional theory calculations show that potassium ammonium vanadate has a modulated electron structure and a better zinc-ion diffusion path with a lower migration barrier.
Synchronous organic-inorganic co-intercalated ammonium vanadate cathode for advanced aqueous zinc-ion batteries

Wenpei Kang,Bingchen Zhang,Zhurui Wang,Zhengchunyu Zhang,Mang Niu,Xuguang An,Zhenkai Mou,Xiaoyu Fan,Xuqiang Hu,Baojuan Xi,Shenglin Xiong

DOI: https://doi.org/10.1016/j.jechem.2024.03.008

IF: 13.1

2024-03-21

Journal of Energy Chemistry

Abstract:Vanadium-based cathode materials are attractive for aqueous zinc-ion batteries (AZIBs) owing to the high capacity from their open frameworks and multiple valences. However, the cycle stability and rate capability are still restricted by the low electrical conductivity and trapped diffusion kinetics. Here, we propose an organic-inorganic co-intercalation strategy to regulate the structure of ammonium vanadate (NH 4 V 4 O 10 , NVO). The introduction of Al 3+ and polyaniline (PANI) induces the optimized layered structure and generation of urchin-like hierarchical construction (AP-NVO), based on heterogeneous nucleation and dissolution-recrystallization growth mechanism. Owing to these favorable features, the AP-NVO electrode delivers a desirable discharge capacity of 386 mA h g -1 at 1.0 A g -1 , high-rate capability of 263 mA h g -1 at 5.0 A g -1 and excellent cycling stability with 80.4% capacity retention over 2000 cycles at 5.0 A g -1 . Such satisfactory electrochemical performance is believed to result from the enhanced reaction kinetics provided by the stable layered structure and a high intercalation pseudo-capacitance reaction. These results could provide enlightening insights into the design of layered vanadium oxide cathode materials.

chemistry, physical,engineering, chemical, applied,energy & fuels
One-step hydrothermal synthesis of vanadium dioxide/carbon core-shell composite with improved ammonium ion storage for aqueous ammonium-ion battery

Xianfang Tan,Fangfang Zhang,Dongzhi Chen,Jia'ni Gong,Jianguo Sun,Changgong Meng,Yifu Zhang

DOI: https://doi.org/10.1016/j.jcis.2024.04.210

Abstract:Aqueous nonmetallic ion batteries have garnered significant interest due to their cost-effectiveness, environmental sustainability, and inherent safety features. Specifically, ammonium ion (NH4+) as a charge carrier has garnered more and more attention recently. However, one of the persistent challenges is enhancing the electrochemical properties of vanadium dioxide (VO2) with a tunnel structure, which serves as a highly efficient NH4+ (de)intercalation host material. Herein, a novel architecture, wherein carbon-coated VO2 nanobelts (VO2@C) with a core-shell structure are engineered to augment NH4+ storage capabilities of VO2. In detail, VO2@C is synthesized via the glucose reduction of vanadium pentoxide under hydrothermal conditions. Experimental results manifest that the introduction of the carbon layer on VO2 nanobelts can enhance mass transfer, ion transport and electrochemical kinetics, thereby culminating in the improved NH4+ storage efficiency. VO2@C core-shell composite exhibits a remarkable specific capacity of ∼300 mAh/g at 0.1 A/g, which is superior to that of VO2 (∼238 mAh/g) and various other electrode materials used for NH4+ storage. The NH4+ storage mechanism can be elucidated by the reversible NH4+ (de)intercalation within the tunnel of VO2, facilitated by the dynamic formation and dissociation of hydrogen bonds. Furthermore, when integrated into a full battery with polyaniline (PANI) cathode, the VO2@C//PANI full battery demonstrates robust electrochemical performances, including a specific capacity of ∼185 mAh·g-1 at 0.2 A·g-1, remarkable durability of 93 % retention after 1500 cycles, as well as high energy density of 58 Wh·kg-1 at 5354 W·kg-1. This work provides a pioneering approach to design and explore composite materials for efficient NH4+ storage, offering significant implications for future battery technology enhancements.
Layered ferric vanadate nanosheets as a high-rate NH4+ storage electrode

Wangwang Xu,Lei Zhang,Kangning Zhao,Xiuxuan Sun,Qinglin Wu

DOI: https://doi.org/10.1016/j.electacta.2020.137008

IF: 6.6

2020-11-01

Electrochimica Acta

Abstract:Aqueous rechargeable batteries hold the potential for the application in large-scale energy storage system due to low cost, environmentally friendliness, and high safety. In the past several decades, tremendous research efforts have been devoted to the batteries with metal ions as charge carriers. However, little attention is paid to the non-metal charge carriers, such as ammonium ions. In this work, layered iron vanadate nanosheets are first introduced as ammonium ion storage electrode. In comparison with the Na+ and K + storage performance, iron vanadate nanosheets show a much improved pseudocapacitance behavior with NH4 + as charge carriers. In this way, at the high current density of 5 A/g, the FVO nanosheets in aqueous (NH4)2SO4 electrolyte display the highest specific capacity of 72.5 mAh/g for 500 cycles, compared with the FVO nanosheets in Na2SO4 (64.7 mAh/g) and K2SO4 (17.3 mAh/g). The difference is attributed to the dirctional H-bondings between the intercalated NH4 + ions and the host iron vanadate nanosheets. This work provides a new direction to expand aqueous batteries with ammonium ion as charger carriers.

electrochemistry
Core-shell structural vanadium Oxide/Polypyrrole anode for aqueous Ammonium-Ion batteries

Xinjian Mu,Yu Song,Zengming Qin,Jianming Meng,Zhihui Wang,Xiao-Xia Liu

DOI: https://doi.org/10.1016/j.cej.2022.139575

IF: 15.1

2023-02-01

Chemical Engineering Journal

Abstract:Aqueous ammonium-ion batteries (AAIBs) are attracting attention, mainly due to the unique interaction between NH4+ and the host materials. Yet, few studies focus on the development of high-performance anode materials for NH4+ storage, hindering the applications of AAIBs. Herein, we study the electrochemical NH4+ storage properties of an electrodeposited vanadium oxide/polypyrrole (VOx@PPy) electrode with a core–shell structure. The strong interaction between PPy and VOx enhances the electrochemical performance of the composite electrode. The electrons in N atoms from PPy are attracted by V cations from VOx, resulting in the enhanced protonation level of PPy and the reduction of V in the composite material. Therefore, VOx@PPy exhibits a high specific capacity of 195.36 mAh/g at 0.2 A/g in ammonium acetate electrolyte, outperforming other reported anode materials for NH4+ storage. In addition, the conformal PPy coating can efficiently suppress VOx dissolution, leading to good cycling stability for VOx@PPy. We assembled an aqueous ammonium-ion battery using VOx@PPy as the anode. The device exhibits a good energy density of 74.1 Wh kg−1 at the power density of 75.6 W kg−1. This work highlights the advantages of the hybrid organic/inorganic materials for NH4+ storage and could push the development of aqueous ammonium-ion batteries.

engineering, chemical, environmental
High Performance of Co-Doped V2o5 Cathode Material for Ammonium Ion Battery

Lin Xing,Han Chen,Xiaoyu Wen,Wei Zhou,Kaixiong Xiang

DOI: https://doi.org/10.2139/ssrn.4054421

2022-01-01

SSRN Electronic Journal

Abstract:Aqueous ammonium-ion batteries have the advantages of abundant resources, eco-friendliness, and fast diffusion, which have been reported in recent years. Vanadium pentoxide (V 2 O 5 ) with layered frame is a good electrode material. In this work, in order to improve the slow ionic diffusion kinetics and low conductivity of V 2 O 5 , a Co-doped V 2 O 5 cathode with good reversibility, cyclic stability and rate performance was prepared by hydrothermal method, and the saturated V 2 O 5 (NH 4 ) 2 SO 4 solution was used as the electrolyte of ammonium ion battery. In pure V 2 O 5 and V 2 O 5 samples with different cobalt doping levels, V 2 O 5 -2Co samples with 2% cobalt doping showed a maximum capacity of 172mAh g -1 and coulombic efficiency of 61.6% after 500 cycles at current density of 1.0A g -1 , indicating good cyclic reversibility. According to the effective mass of the two electrodes, the high energy density is ~152Wh kg -1 , and it has a good cycle life in 1000 cycles, and the capacity retention rate is 49.2%. Based on these results, it is expected that Co-doped V 2 O 5 nanoparticles may help enhance electronic conductivity and provide an effective way for rapid electron transfer.
Polypyrrole pre-intercalation engineering-induced NH 4 + removal in tunnel ammonium vanadate toward high-performance zinc ion batteries

Yangyang Gong,Pengtao Zhang,Shuang Fan,Minghui Cai,Jiangtao Hu,Zhaoyan Luo,Hongwei Mi,Xiantao Jiang,Qianling Zhang,Xiangzhong Ren

DOI: https://doi.org/10.1016/j.jcis.2024.03.025

IF: 9.9

2024-03-10

Journal of Colloid and Interface Science

Abstract:Ammonium vanadate with stable bi-layered structure and superior mass-specific capacity have emerged as competitive cathode materials for aqueous rechargeable zinc-ion batteries (AZIBs). Nevertheless, fragile NH...O bonds and too strong electrostatic interaction by virtue of excessive NH 4 + will lead to sluggish Zn 2+ ion mobility, further largely affects the electro-chemical performance of ammonium vanadate in AZIBs. The present work incorporates polypyrrole (PPy) to partially replace NH 4 + in NH 4 V 4 O 10 (NVO), resulting in the significantly enlarged interlayers (from 10.1 to 11.9 Å), remarkable electronic conductivity, increased oxygen vacancies and reinforced layered structure. The partial removal of NH 4 + will alleviate the irreversible deammoniation to protect the laminate structures from collapse during ion insertion/extraction. The expanded interlayer spacing and the increased oxygen vacancies by the virtue of the introduction of polypyrrole improve the ionic diffusion, enabling exceptional rate performance of NH 4 V 4 O 10 . As expected, the resulting polypyrrole intercalated ammonium vanadate (NVOY) presents a superior discharge capacity of 431.9 mAh g −1 at 0.5 A g −1 and remarkable cycling stability of 219.1 mAh g −1 at 20 A g −1 with 78 % capacity retention after 1500 cycles. The in-situ electrochemical impedance spectroscopy (EIS), in-situ X-ray diffraction (XRD), ex-situ X-ray photoelectron spectroscopy (XPS) and ex-situ high resolution transmission electron microscopy (HR-TEM) analysis investigate a highly reversible intercalation Zn-storage mechanism, and the enhanced the redox kinetics are related to the combined effect of interlayer regulation, high electronic conductivity and oxygen defect engineering by partial substitution NH 4 + of PPy incorporation.

chemistry, physical
Ethanediamine Intercalation Induced Hydrogen Bond Network in Vanadium Oxide for Ultralong‐Life Aqueous Ammonium Ion Batteries

Tzu-Hao Lu,Qiyu Liu,Jinjun He,Hao Liu,Yanxia Yu,Yi Wang,Xihong Lu

DOI: https://doi.org/10.1002/batt.202400426

2024-07-22

Batteries & Supercaps

Abstract:Aqueous ammonium‐ion batteries (AAIBs) have received tremendous attention as a potential energy technology, but their development is severely challenged by the fact that the as‐reported electrode materials are usually unable to meet the requirements of high capacity and high stability simultaneously. Herein, an organic‐inorganic hybrid material of ethanediamine (EDA) intercalated vanadium oxide (VO‐EDA) is synthesized as a high‐performance anode material for AAIBs. The intercalated EDA molecules not only act as an electron donor to bind with NH4+, but also form hydrogen bonding network structures with vanadium oxides to facilitate charge/ion transfer. As a result, this hybrid material provides a high specific capacity of 104.4 mAh g−1 at 0.5 A g−1 and good cycling stability after 5000 cycles 10 A g−1 with a coulombic efficiency of ~100%. Moreover, the ammonium‐ion full cell based on VO‐EDA anode and NiHCF cathode achieves a specific capacity of 55 mAh g−1 at 0.1 A g−1 and impressive cycling stability with 88.6% capacity retention after 10000 cycles at 5 A g−1.

materials science, multidisciplinary,electrochemistry
Tuning Ionic Conduction and Structure Stability of Ammonium Vanadate by Intercalating Polyaniline Molecules for Advanced Aqueous Zinc-Ion Batteries

Liming Chen,Ziqiang Zhang,Yu Ma,Yuanming Wang,Huanhao Xiao,Ming Xu,Youyuan Huang,Guohui Yuan

DOI: https://doi.org/10.1039/d2qi02669d

IF: 7.779

2023-01-01

Inorganic Chemistry Frontiers

Abstract:Polyaniline is intercalated into NH4V4O10in situ to further enlarge interlayer spacing (13.59 Å) with improving Zn2+diffusion efficient, enhance electronic conductivity (0.001214 S cm−1) and stabilize crystal structure (92.23% over 5000 cycles).
Pre-removing Partial Ammonium Ions from the Interlayer of Ammonium Vanadate with Acid Treating for Quasi-Solid-state Flexible Zinc Ion Batteries

Liming Chen,Haifeng Yue,Ziqiang Zhang,Yu Ma,Yuanming Wang,Ming Xu,Youyuan Huang,Guohui Yuan

DOI: https://doi.org/10.1016/j.cej.2022.140679

IF: 15.1

2022-01-01

Chemical Engineering Journal

Abstract:Aqueous zinc ion batteries (AZIBs) have received extensive attention and study owing to environmental pro-tection and intrinsic safety, in which ammonium vanadate (NH4V4O10) with possessing stable bi-layered struc-ture and high theoretical quality capacity is regarded as a potential cathode material. Nevertheless, the excessive ammonium ions located in the interlayer largely limit the Zn2+ diffusion efficiency. Herein, acid treatment was employed to remove part of ammonium ions from the interlayer of NH4V4O10 to prepared NH4+-deficient ammonium vanadate (NVO2), which can enlarge the interlayer distance and enhance the Zn2+ diffusion efficient. The experimental result demonstrates that the NVO2 electrode exhibits a high specific capacity of 472.5 mAh/g at 0.1 A/g and excellent rate performance of 195.5 mAh/g with current density increasing 100 times. Subse-quently, some ex-situ characterization methods were utilized to analyze the Zn2+ storage mechanism in NVO2. In addition, flexible NVO2/CNT membrane electrode was prepared by vacuum filtration and further assemble the quasi-solid-state flexible zinc ion batteries with employing polyacrylamide hydrogel, which exhibits a favorable electrochemical performance and mechanical stability as well, revealing its huge application prospect for flexible electronics.
Unlocking High‐Performance Ammonium‐Ion Batteries: Activation of In‐Layer Channels for Enhanced Ion Storage and Migration

Xiangyong Zhang,Hua Wei,Baohui Ren,Jingjing Jiang,Guangmeng Qu,Jinlong Yang,Guangming Chen,Hongfei Li,Chunyi Zhi,Zhuoxin Liu

DOI: https://doi.org/10.1002/adma.202304209

IF: 29.4

2023-07-05

Advanced Materials

Abstract:Ammonium‐ion batteries, leveraging non‐metallic ammonium ions, have arisen as a promising electrochemical energy storage system; however, their advancement has been hindered by the scarcity of high‐performance ammonium‐ion storage materials. In this study, w e propose an electrochemical phase transformation approach for the in‐situ synthesis of layered VOPO4·2H2O (E‐VOPO) with predominant growth on the (200) plane, corresponding to the tetragonal channels on (001) layers. O ur findings reveal that these tetragonal in‐layer channels not only furnish NH4+ storage sites but also enhance transfer kinetics by providing rapid cross‐layer migration pathways. This crucial aspect has been largely overlooked in previous studies. The E‐VOPO electrode exhibits exceptional ammonium‐ion storage performance, including significantly increased specific capacity, enhanced rate capability, and robust cycling stability. The resulting full cell can be stably operated for 12500 charge‐discharge cycles at 2 A g−1 for over 70 days. The proposed approach offers a new strategy for meticulously engineering electrode materials with facilitated ion storage and migration, thereby paving the way for developing more efficient and sustainable energy storage systems. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Expanding Layer Spacing of Carbon‐Coated Vanadium Oxide via Ammonium Ions for Fast Electrochemical Kinetics in Aqueous Zinc‐ion Batteries

Xingke Yang,Tinghong Gao,Ruiya Zhao,Qiaodan Wu,Kangsheng Shi,Ziqiang She,Shengshang Lu,Quan Xie,Yunjun Ruan

DOI: https://doi.org/10.1002/ente.202200990

IF: 4.149

2022-11-30

Energy Technology

Abstract:Aqueous zinc ion batteries (AZIBs) have recently shown promise as prospective energy storage systems owing to their eco‐friendliness, low price, high security, and reversible storage. However, low specific capacity and the lack of cathode materials with a long life severely restrict the development of AZIBs. Herein, nanoflower‐like vanadium oxide nanoribbons were rapidly synthesized using a microwave‐assisted solvothermal method, and the layer spacing of synthesized nanoribbons was subsequently expanded with ammonium via high‐temperature calcination in an NH3 atmosphere. The increased layer spacing of vanadium oxide facilitated the intercalation/extraction of Zn2+ and accelerated the electrochemical kinetics, resulting in a highly reversible pseudocapacitive contribution (71% at a scan rate of 1 mV s‐1). The ammonium‐embedded V2O5 with the carbon‐coated NH4V4O10/C (NHVO/C) cathode showed a high specific capacity (458.6 mAh g−1 at 0.1 A g−1) and excellent cycling stability (about 90% capacity retention after 2800 cycles at 10 A g−1), which is superior to most cathode materials for AZIBs. Furthermore, reversible Zn2+ intercalation/extraction in the NHVO/C cathode during electrochemical reactions was elucidated through in situ and ex situ material characterization. We expect our findings to inspire the development of advanced vanadium‐based cathode materials for green, safe, and dependable energy storage devices for commercial applications. This article is protected by copyright. All rights reserved.

energy & fuels
Cations‐Pillared and Polyaniline‐Encapsulated Vanadate Cathode for High‐Performance Aqueous Zinc‐Ion Batteries

Mengmeng Ni,Mulan Qin,Hong Chang,Xueru Shi,Bingying Pei,Shuquan Liang,Xinxin Cao

DOI: https://doi.org/10.1002/cssc.202400526

IF: 8.4

2024-04-30

ChemSusChem

Abstract:Layered vanadium‐based oxides have emerged as highly promising candidates for aqueous zinc‐ion batteries (AZIBs) due to their open‐framework layer structure and high theoretical capacity among the diverse cathode materials investigated. However, the susceptibility to structural collapse during charge‐discharge cycling severely hampers their advancement. Herein, we propose an effective strategy to enhance the cycling stability of vanadium oxides. Initially, the structural integrity of the host material is significantly reinforced by incorporating bi‐cations Na+ and NH4+ as "pillars" between the V2O5 layers (NaNVO). Subsequently, surface coating with polyaniline (PA) is employed to further improve the conductivity of the active material. As anticipated, the assembled Zn//NaNVO@PA cell exhibits a remarkable discharge capacity of 492 mAh g–1 at 0.1 A g–1 and exceptional capacity retention up to 89.2% after 1000 cycles at a current density of 5 A g–1. Moreover, a series of in‐situ and ex‐situ characterization techniques were utilized to investigate both Zn ions insertion/extraction storage mechanism and the contribution of polyaniline protonation process towards enhancing capacity.

chemistry, multidisciplinary,green & sustainable science & technology
In-situ construction of vanadium dioxide and MXene heterostructure towards high-capacity ammonium ion storage

Zeyu Cao,Jinyao Yang,Hang Ren,Jingyuan Zhang,Ying Yang,Guoyin Zhu,Yizhou Zhang,Shengyang Dong

DOI: https://doi.org/10.1039/d4cc05249h

IF: 4.9

2024-10-31

Chemical Communications

Abstract:A VO2@V2C (VO@VCM) anode material is proposed for aqueous ammonium ion batteries (AmIBs) by one-step in-situ oxidation of 2D V2C MXene. The VO@VCM delivers a high capacity of 226 mAh g-1, super rate performance, and long cycling stability due to the synergistic effect of the high conductive MXene and high active VO2.

chemistry, multidisciplinary
Graphene-like VO2 Vertically Growing on Carbon Cloth Enables Fast and High-Capacity Ammonium Ion Storage

Lili Liu,Yinpeng Pan,Weiwei Fang,Yuyang Hou,Yuping Wu

DOI: https://doi.org/10.1016/j.apsusc.2024.160918

IF: 6.7

2024-01-01

Applied Surface Science

Abstract:Among these aqueous (non-)metal ion battery systems, ammonium ions are drawing increasing attention due to its unique advantages including small molar mass, abundant reserves and nontoxicity. However, suitable NH4+ hosting materials with rational structure design are still in high demand to build high performance ammonium ion batteries (AIB). Herein, a graphene-like vanadium dioxide (VO2) vertically growing on carbon cloth (CC) is reported as self-supporting electrode for AIB. The three-dimensional conductive carbon fiber substrate and the warped graphene-like VO2 lead to enhanced NH4+ transport and shortened diffusion length. As a result, the asprepared VO2@CC displays an initial specific capacity up to 250.1 mAh g- 1 at the current density of 1 A g- 1. After 1000 cycles, it still maintains a capacity of 60.4 m Ah g- 1. A series of ex-situ characterizations provides firm evidence that the insertion and extraction of NH4+ in VO2 are realized through the formation and breakage of hydrogen bonds. When combined with activated carbon (AC) to form a hybrid battery VO2@CC//AC, an initial discharge capacity of 74.98 mAh g-1 with the capacity retention of 43.64 % after 200 cycles is achieved, while the efficiency is maintained at about 92 %, surpassing other reported vanadium-based materials.
Enhanced Rate Capability and Cycling Stability of Novel Ammonium Vanadate Materials Used in Aqueous Li-Ion Batteries

Najeeb Ur Rehman Lashari,Mingshu Zhao,Qingyang Zheng,Xinhai He,Irfan Ahmed,Zhou Su,Songpon Tangsee,Xiaoping Song

DOI: https://doi.org/10.1021/acs.energyfuels.0c04068

IF: 4.6541

2021-01-01

Energy & Fuels

Abstract:Aqueous rechargeable lithium-ion batteries (ARLBs) are considered to be promising alternatives to traditional Li+-ion batteries. Since the advent of the development of ARLB technology, vanadium oxide has been widely used as an anode material because of its great potential. However, several key flaws require urgent attention, for example, low-rate performance and meager cyclic stability. In this paper, a strategy is proposed to augment the interlayer spacing of the vanadium-oxide structure to boost its electrochemical performance. This work aims at exploiting vanadium oxide by modifying its interlayer spacing by introducing a NH4+ molecule to achieve the pillar effect and the as-prepared NH4V4O10, which exhibits a higher interlayer spacing of 9.8 angstrom. The increased interlayer spacing allows more Li+ to accommodate in the host material and to facilitate their migration. The NH4V4O10 coupled with a commercial LiMn2O4 cathode is able to deliver a capacity of 61.5 mAhg(-1) at a current density of 3 Ag-1 in saturated aqueous LiNO3 electrolyte. The decent cyclic capacity retention of 69.5% is attained for NHVO//LiNO3//LiMn2O4 following 300 cycles of deep charge-discharge at 3 Ag-1. On the basis of the communal findings, the incorporation of NH4+ molecules into the interlayer spacing offers great promise as a high-performance anode for ARLBs.
Enhanced Reversible Zinc Ion Intercalation in Deficient Ammonium Vanadate for High-Performance Aqueous Zinc-Ion Battery

Quan Zong,Wei Du,Chaofeng Liu,Hui Yang,Qilong Zhang,Zheng Zhou,Muhammad Atif,Mohamad Alsalhi,Guozhong Cao

DOI: https://doi.org/10.1007/s40820-021-00641-3

2021-01-01

Abstract:Abstract Ammonium vanadate with bronze structure (NH 4 V 4 O 10 ) is a promising cathode material for zinc-ion batteries due to its high specific capacity and low cost. However, the extraction of $${\text{NH}}_{{4}}^{ + }$$ NH 4 + at a high voltage during charge/discharge processes leads to irreversible reaction and structure degradation. In this work, partial $${\text{NH}}_{{4}}^{ + }$$ NH 4 + ions were pre-removed from NH 4 V 4 O 10 through heat treatment; NH 4 V 4 O 10 nanosheets were directly grown on carbon cloth through hydrothermal method. Deficient NH 4 V 4 O 10 (denoted as NVO), with enlarged interlayer spacing, facilitated fast zinc ions transport and high storage capacity and ensured the highly reversible electrochemical reaction and the good stability of layered structure. The NVO nanosheets delivered a high specific capacity of 457 mAh g −1 at a current density of 100 mA g −1 and a capacity retention of 81% over 1000 cycles at 2 A g −1 . The initial Coulombic efficiency of NVO could reach up to 97% compared to 85% of NH 4 V 4 O 10 and maintain almost 100% during cycling, indicating the high reaction reversibility in NVO electrode.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology

A high-capacity polyaniline-intercalated layered vanadium oxide for aqueous ammonium-ion batteries

Polyaniline Intercalation Induced Great Enhancement of Electrochemical Properties in Ammonium Vanadate Nanosheets as an Advanced Cathode for High-Performance Aqueous Zinc-Ion Batteries

3D Orbital Electron Tunning and Crystal Engineering Enables High-Capacity Vanadium Oxide for Aqueous Ammonium Ion Batteries

Polypyrrole intercalated into the interlayer of vanadium oxide hydration boosts NH4+ storage for aqueous ammonium ion batteries

Potassium Ammonium Vanadate with Rich Oxygen Vacancies for Fast and Highly Stable Zn-Ion Storage.

Synchronous organic-inorganic co-intercalated ammonium vanadate cathode for advanced aqueous zinc-ion batteries

One-step hydrothermal synthesis of vanadium dioxide/carbon core-shell composite with improved ammonium ion storage for aqueous ammonium-ion battery

Layered ferric vanadate nanosheets as a high-rate NH4+ storage electrode

Core-shell structural vanadium Oxide/Polypyrrole anode for aqueous Ammonium-Ion batteries

High Performance of Co-Doped V2o5 Cathode Material for Ammonium Ion Battery

Polypyrrole pre-intercalation engineering-induced NH 4 + removal in tunnel ammonium vanadate toward high-performance zinc ion batteries

Ethanediamine Intercalation Induced Hydrogen Bond Network in Vanadium Oxide for Ultralong‐Life Aqueous Ammonium Ion Batteries

Tuning Ionic Conduction and Structure Stability of Ammonium Vanadate by Intercalating Polyaniline Molecules for Advanced Aqueous Zinc-Ion Batteries

Pre-removing Partial Ammonium Ions from the Interlayer of Ammonium Vanadate with Acid Treating for Quasi-Solid-state Flexible Zinc Ion Batteries

Unlocking High‐Performance Ammonium‐Ion Batteries: Activation of In‐Layer Channels for Enhanced Ion Storage and Migration

Expanding Layer Spacing of Carbon‐Coated Vanadium Oxide via Ammonium Ions for Fast Electrochemical Kinetics in Aqueous Zinc‐ion Batteries

Cations‐Pillared and Polyaniline‐Encapsulated Vanadate Cathode for High‐Performance Aqueous Zinc‐Ion Batteries

In-situ construction of vanadium dioxide and MXene heterostructure towards high-capacity ammonium ion storage

Graphene-like VO2 Vertically Growing on Carbon Cloth Enables Fast and High-Capacity Ammonium Ion Storage

Enhanced Rate Capability and Cycling Stability of Novel Ammonium Vanadate Materials Used in Aqueous Li-Ion Batteries

Enhanced Reversible Zinc Ion Intercalation in Deficient Ammonium Vanadate for High-Performance Aqueous Zinc-Ion Battery