Abstract:Nanofiltration (NF) membranes with simultaneous high rejection of divalent cations and anions and high water permeation were designed and fabricated via interfacial polymerization (IP) on three-channel capillary ultrafiltration (UF) membranes. MWCNTs-COOH were modified with poly(amidoamine) (PAMAM) and the as-synthesized MWCNTs-PAMAM were embedded into the inner polyamide skin-layer of the NF membranes by incorporating them into a piperazine (PIP) aqueous solution, followed by IP with trimesoyl chloride (TMC). The rigid MWCNTs and the dendrimer PAMAM molecules endow the as-fabricated NF membranes with high porosity and good hydrophilicity. Additionally, the -NH2 groups of PAMAM introduce some positive sites into the polyamide layer. The as-prepared NF membranes with incorporated MWCNTs-PAMAM exhibit a pure water flux of 48.7 L m(-2) h(-1) and 92.6% and 88.5% rejection for Na2SO4 and MgCl2, respectively, at 4 bar. Moreover, the NF membranes display high rejection for sulfates and metal cations, including heavy metal ions. The practicability of the membranes for mine-wastewater treatment was tested, and the membranes showed above 80% rejection of heavy metals and solution flux of about 30 L m(-2) h(-1). In addition, their separation performance and stability were satisfactory during the long-term run. The high rejection of the membranes for metal cations is ascribed to the positive sites offered by MWCNTs-PAMAM and the narrow membrane pores since both electrostatic repulsion and size exclusion play a role during membrane filtration. The good separation performance of the membranes for multivalent anions and heavy metal cations illustrates their potential for applications in heavy metal wastewater treatment.

Novel high-flux positively charged composite membrane incorporating titanium-based MOFs for heavy metal removal

A Novel Positively Charged Nanofiltration Membrane Formed Via Simultaneous Cross-Linking/quaternization of Poly(m-Phenylene Isophthalamide)/polyethyleneimine Blend Membrane

A novel trimesoyl chloride/hyper branched polyethyleneimine/MOF (MIL-303)/P84 co-polyimide nanocomposite mixed matrix membranes with an ultra-thin surface cross linking layer for removing toxic heavy metal ions from wastewater

Dually Charged Mof-Based Thin-Film Nanocomposite Nanofiltration Membrane For Enhanced Removal Of Charged Pharmaceutically Active Compounds

A Positively Charged Tight UF Membrane and Its Properties for Removing Trace Metal Cations Via Electrostatic Repulsion Mechanism.

Highly Permeable Positively Charged Nanofiltration Membranes with Multilayer Structures for Multiple Heavy Metal Removals

Novel high-flux positively charged aliphatic polyamide nanofiltration membrane for selective removal of heavy metals

Triethanolamine Modification Produces Ultra-Permeable Nanofiltration Membrane with Enhanced Removal Efficiency of Heavy Metal Ions

Incorporating Etched ZnO Nanoparticles to Fabricate Positively Charged Composite Membrane for Heavy Metal Removal

Preparation of Polyethylene Based Composite Nanofiltration Membrane and Its Application in Removal of Heavy Metals for Water Purification

Nanofiltration membrane with surface nanostructure induced by interfacial modification for heavy metal ions removal, salt selection and antibacterial

A PEI/TMC membrane modified with an ionic liquid with enhanced permeability and antibacterial properties for the removal of heavy metal ions

How to fabricate a negatively charged NF membrane for heavy metal removal via the interfacial polymerization between PIP and TMC?

Chelating polymer modified P84 nanofiltration (NF) hollow fiber membranes for high efficient heavy metal removal

Tuning the Primary Selective Nanochannels of MOF Thin-Film Nanocomposite Nanofiltration Membranes for Efficient Removal of Hydrophobic Endocrine Disrupting Compounds

Constructing Positively Charged Hollow Fiber Nanofiltration Membranes with High Performance for the Treatment of Wastewater Containing Heavy Metal Ions

Three-channel capillary nanofiltration membrane with quaternary ammonium incorporated for efficient heavy metals removal

Designed water channels and sieving effect for heavy metal removal by a novel silica-poly(ionic liquid) nanoparticles TFN membrane

Microscopic Techniques for Fabrication of Polyethersulfone Thin‐film Nanocomposite Membranes Intercalated with UiO‐66‐SO3H for Heavy Metal Ions Removal from Water

Three-channel Capillary NF Membrane with PAMAM-MWCNT-embedded Inner Polyamide Skin Layer for Heavy Metals Removal

Thin-Film Nanocomposite Nf Membrane With Go On Macroporous Hollow Fiber Ceramic Substrate For Efficient Heavy Metals Removal