Abstract:In studies of turbulent boundary layers at high Reynolds number, the term “roughness transition” is generally an implicit reference to the case of a streamwise step-change in roughness length (whether the roughness length is associated with surface fluxes of momentum, temperature, humidity, or some other quantity). This roughness configuration and flow response has received broad attention. Here, in contrast, we consider turbulent wall-bounded flows over transverse roughness transitions using large-eddy simulation. This is accomplished simply by aligning the boundary layer freestream direction parallel to momentum roughness length transitions, instead of perpendicular. In the present cases, the bounding surface is composed of two “high roughness” strips placed between three “low roughness” strips. The influences of two parameters are evaluated: (1) λ, the ratio of the high roughness length to the low roughness length; and (2) Ls, the width of the high roughness strips. In the immediate vicinity of the roughness change, the abrupt wallstress variation induces transverse turbulent mixing which is the source of a δ-scale secondary flow, recently described as a low momentum pathway (LMP) by Mejia-Alvarez et al. [“Structural attributes of turbulent flow over a complex topography,” Coherent Flow Structures at the Earth's Surface (Wiley-Blackwell, 2013), Chap. 3, pp. 25–42] and Mejia-Alvarez and Christensen [“Wall-parallel stereo PIV measurements in the roughness sublayer of turbulent flow overlying highly-irregular roughness,” Phys. Fluids, 25, 115109]. LMPs are spatially stationary and flanked by δ-scale counter-rotating vortices which serve to pump fluid vertically from the wall, ultimately leading to a spanwise variation in the boundary layer depth (for flows over surface roughness with a converging-diverging riblet pattern, spanwise variation of δ was also found in recent experiments by Nugroho et al. [“Large-scale spanwise periodicity in a turbulent boundary layer induced by highly ordered and direction surface roughness,” Int. J. Heat Fluid Flow 41, 90–102 (2013)]. Mean velocity and transverse Reynolds stresses are used to determine the mixing length associated with transverse mixing. In general, we find that variations in Ls and λ have a strong and mild impact on the secondary flow pattern, respectively.

Effects of roughness on non-equilibrium turbulent boundary layers

Challenges and perspective on the modelling of high-Re, incompressible, non-equilibrium, rough-wall boundary layers

Direct Numerical Simulation of Channel Flow with Real Surface Roughness Using a Ghost Cell Immersed Boundary Method

Experimental study of a turbulent boundary layer with a rough-to-smooth change in surface conditions at high Reynolds numbers

On the physical structure, modelling and computation-based prediction of two-dimensional, smooth-wall turbulent boundary layers subjected to streamwise pressure gradients

Wall Boundary Conditions for RANS Modelling of Unidirectional and Oscillatory Boundary-Layer Flows

Effects of Wall Roughness on Particle Dynamics in a Spatially Developing Turbulent Boundary Layer

Turbulent flow of Newtonian and non-Newtonian fluids in rough channels: Part I: Roughness effect on Newtonian fluids

Effect of Surface Roughness Geometry on Boundary-Layer Transition and Far-Field Noise

Non-equilibrium turbulent boundary layers in high reynolds number flow at incompressible conditions: effects of streamline curvature and three dimensionality

Observations of turbulent secondary flows in a rough-wall boundary layer

Leray-alpha model and transition to turbulence in rough-wall boundary layers

Numerical and experimental study of mechanisms responsible for turbulent secondary flows in boundary layer flows over spanwise heterogeneous roughness

Effects of Distributed Roughness on Crossflow Instability through Generalized Resonance Mechanisms

Effects of Structured Roughness on Fluid Flow at the Microscale Level

Roughness effects on compressible turbulent boundary layers under different Mach numbers and wall temperature conditions

Wall Roughness Induces Asymptotic Ultimate Turbulence

Turbulent boundary layer flow over transverse aerodynamic roughness transitions: Induced mixing and flow characterization

Hexagonal roughness characterization in turbulent flow

Effects of Wall Disturbances on the Statistics of Supersonic Turbulent Boundary Layers

Direct Numerical Simulation of Turbulent Boundary Layer over Hemispherical Rough Walls