Turbulent boundary layer flow over transverse aerodynamic roughness transitions: Induced mixing and flow characterization
David Willingham,William Anderson,Kenneth T. Christensen,Julio M. Barros
DOI: https://doi.org/10.1063/1.4864105
IF: 4.6
2014-02-01
Physics of Fluids
Abstract:In studies of turbulent boundary layers at high Reynolds number, the term “roughness transition” is generally an implicit reference to the case of a streamwise step-change in roughness length (whether the roughness length is associated with surface fluxes of momentum, temperature, humidity, or some other quantity). This roughness configuration and flow response has received broad attention. Here, in contrast, we consider turbulent wall-bounded flows over transverse roughness transitions using large-eddy simulation. This is accomplished simply by aligning the boundary layer freestream direction parallel to momentum roughness length transitions, instead of perpendicular. In the present cases, the bounding surface is composed of two “high roughness” strips placed between three “low roughness” strips. The influences of two parameters are evaluated: (1) λ, the ratio of the high roughness length to the low roughness length; and (2) Ls, the width of the high roughness strips. In the immediate vicinity of the roughness change, the abrupt wallstress variation induces transverse turbulent mixing which is the source of a δ-scale secondary flow, recently described as a low momentum pathway (LMP) by Mejia-Alvarez et al. [“Structural attributes of turbulent flow over a complex topography,” Coherent Flow Structures at the Earth's Surface (Wiley-Blackwell, 2013), Chap. 3, pp. 25–42] and Mejia-Alvarez and Christensen [“Wall-parallel stereo PIV measurements in the roughness sublayer of turbulent flow overlying highly-irregular roughness,” Phys. Fluids, 25, 115109]. LMPs are spatially stationary and flanked by δ-scale counter-rotating vortices which serve to pump fluid vertically from the wall, ultimately leading to a spanwise variation in the boundary layer depth (for flows over surface roughness with a converging-diverging riblet pattern, spanwise variation of δ was also found in recent experiments by Nugroho et al. [“Large-scale spanwise periodicity in a turbulent boundary layer induced by highly ordered and direction surface roughness,” Int. J. Heat Fluid Flow 41, 90–102 (2013)]. Mean velocity and transverse Reynolds stresses are used to determine the mixing length associated with transverse mixing. In general, we find that variations in Ls and λ have a strong and mild impact on the secondary flow pattern, respectively.
mechanics,physics, fluids & plasmas