Abstract:Undecorated and Pt-decorated SnO2 nanoparticles (NPs) were prepared using sol-gel and hydrothermal methods. The tin dioxide NPs, as sensing materials, were screen printed on alumina substrates with Pt test electrode to fabricate the gas sensors. The characteristics of these gas sensors in terms of composition, morphology, and sensing property were investigated by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), and electrochemical workstation, respectively. The results elucidated that the response time of Pt-decorated SnO2 sensor to 100 ppm H-2 is 29 s at 350 degrees C, which is almost half of that of pure SnO2 gas sensor. Meanwhile, the effect of operating temperature and Pt decorating on the sensing properties and the 'n' value is studied. Comparing with many fabricated H-2 gas sensors, our as-prepared sensor exhibits not only a high response time but also detects H-2 gas down to 0.08 ppm. To the author's best knowledge, the detection limit of 0.08 ppm is the best reported detection limit for the gas sensors based on tin oxide NPs so far. Moreover, there is a significant enhancement in the selectivity of Pt-decorated SnO2 sensor to the H-2 gas against other investigated gases such as carbon monoxide (CO), methane (CH4), nitrogen dioxide (NO2), sulfur dioxide (SO2). Overall, the obtained results clearly demonstrate that the Pt-decorated SnO2 is an excellent sensing material for the fabrication of gas sensors and the detection of trace concentration of H-2 down to 0.08 ppm. Furthermore, the results of statistical and fractal analysis on 2D microstructures of FESEM images showed a coefficient correlation of about 0.991 for all the samples. (C) 2019 Elsevier B.V. All rights reserved.

Development of low-temperature SnO2–Au gas sensors for H2S detection in food freshness monitoring

Achieving Room-Temperature ppb-Level H 2 S Detection in a Au-SnO 2 Sensor with Low Voltage Enhancement Effect

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Ppb-level H2S gas sensor based on CuNi-MOFs derivatives for meat freshness detection at low temperature environment

Rapid Detection of Ultralow H 2 S Concentration with on-chip Fabrication of SnO 2 -based Gas Sensors by Direct Electrodeposition from Non-Aqueous Solvents

Single-Atom Au-Functionalized Mesoporous SnO2 Nanospheres for Ultrasensitive Detection of Listeria Monocytogenes Biomarker at Low Temperatures.

Recent progresses in metal oxide gas sensors for food freshness monitoring

P-N Heterojunction formation: Metal Sulfide@Metal Oxide Chemiresistor for ppb H 2 S Detection from Exhaled Breath and Food Spoilage at Flexible Room Temperature

Development of Sensors Based on CuO-doped SnO2 Hollow Spheres for Ppb Level H2S Gas Sensing

A Sensing Properties Study On Miniature Au/SnO2 Gas Sensor For Hydrogen Sulfide Detection

Ultrasensitive H2S Gas Sensor Based on SnO2 Nanoparticles Modified WO3 Nanocubes Heterojunction

Low Operating Temperature Hydrogen Sensor Based On Sno2 Hollow Nanospheres

Hydrogen gas sensor based on self-heating effect of SnO 2 /Pt thin film with ultralow power consumption

Experimental and theoretical studies of sputter deposited pure SnO2 thin films for high selective and humidity-tolerant H2 gas sensor

Photoelectric H2S Sensing Based on Electrospun Hollow CuO-SnO2 Nanotubes at Room Temperature

Single-Atom Au-Functionalized Mesoporous SnO 2 Nanospheres for Ultrasensitive Detection of Listeria monocytogenes Biomarker at Low Temperatures

Low-temperature Hydrogen Detection Sensor Based on CeO2 -DOPED SnO2

A Highly Sensitivity and Selectivity Pt-SnO2 Nanoparticles for Sensing Applications at Extremely Low Level Hydrogen Gas Detection

An Au/SnO-SnO2 nanosheet based composite used for rapid detection of hydrogen sulphide

ZnO@CuO hollow nanospheres based composites used for sensitive detection of hydrogen sulfide with long-term stability

Ultrafine Nanoparticles of W-doped SnO2 for Durable H2S Sensors with Fast Response and Recovery.