Abstract:Since the outbreak of novel coronavirus (COVID-19), the use of personal protective equipment (PPE) has increased profusely. Among all the PPEs, face masks are the most picked ones by the mass people for protective purpose. This spawned extensive daily use of face masks and production of masks had to augment to keep up this booming demand. Such extensive use of face masks has resulted in a huge waste generation. Lack of proper disposal, waste management and waste recycling have already led this waste to pervade in the environment. In quest of finding a solution, here in this research, a composite material was fabricated utilizing waste face mask (WFM) with unsaturated polyester resin (UPR) and the mechanical properties were evaluated. The composites were fabricated by incorporating 1%, 2%, 3%, 4% and 5% WFM (by weight) within the UPR matrix in the shredded form following hand lay-up technique. Tensile properties, i.e., tensile strength (TS), tensile modulus (TM) and percentage elongation at break (% EB) as well as flexural properties, i.e., bending strength (BS) and bending modulus (BM) were evaluated for the fabricated composites. According to the results obtained, the 2% WFM loaded composites showed highest values of TS, TM, BS and BM which are 31.61 N/mm2, 1551.41 N/mm2, 66.53 N/mm2 and 4632.71 N/mm2 respectively. These values of 2% WFM loaded composite are 69.58%, 107.78%, 129.49% and 152% higher than the values of the control sample (UPR). Such results depict the successfulness of WFM's incorporation as a reinforcing material in the composite materials. Attenuated Total Reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), water uptake and thickness swelling tests were also carried out for the fabricated composites. FTIR of the collected WFM revealed the fiber to be of polypropylene and the existing functional groups were also identified. The SEM images confirmed the proper adhesion of WFM and UPR in terms of mechanical bonding rather than chemical bonding. Water absorption and dimension change was investigated by water uptake and thickness swelling test. To sum up, the way we have utilized WFM as a reinforcing agent in a composite material, this could be a possible solution for the face mask's waste conundrum.

Sustainable Reuse of Shredded Face Mask in Biopolymer Treated Expansive Soil

DEM modeling of granular soils reinforced by disposable face-mask chips

Repurposing of COVID-19 single-use face masks for pavements base/subbase

Reuse of COVID-19 face mask for the amelioration of mechanical properties of fat clay: A novel solution to an emerging waste problem

An Environmentally Friendly Solution for Waste Facial Masks Recycled in Construction Materials

Recycling of Waste Facial Masks as a Construction Material, a Step towards Sustainability

Experimental Study on the Mechanical Behavior of Sandy Soil Reinforced by Disposable Face Mask Chips under Different Stress Paths

Experimental study on the monotonic mechanical behavior of completely decomposed granite soil reinforced by disposable face-mask chips

Preliminary evaluation of the feasibility of using polypropylene fibres from COVID-19 single-use face masks to improve the mechanical properties of concrete

Covid-19 waste facemask conundrum: A facile way of utilization through fabricating composite material with unsaturated polyester resin and evaluation of its mechanical properties

Geotechnical performance of municipal solid waste fines stabilized with xanthan gum and agar gum

Stabilization of expansive soil subgrade by waste plastic

Mechanical and deformation behavior of clay reinforced by discarded mask fibers

Utilization of discarded face masks in combination with recycled concrete aggregate and silica fume for sustainable civil construction projects

Mechanical characterizations of waste face masks reinforced polyester composites: Recycling wastes into resources

Use of xanthan and guar gums in soil strengthening

Incorporation of Disposed Face Mask to Cement Mortar Material: An Insight into the Dynamic Mechanical Properties

Inclusion of Pseudomonas fluorescens into soil-like fraction from municipal solid waste management park to enhance plastic biodegradation

Guar gum-stabilized soil: a clean, sustainable and economic alternative liner material for landfills

Experimental Study on Effect of Waste Plastic Bottle Strips in Soil Improvement

Optimization of physical and strength performance of cellulose-based fiber additives stabilized expansive soil