Abstract:In this study, we describe a novel high throughput, micro-macro approach for the identification and efficient design of biopolymer stabilized soil systems. At the "microscopic" scale, we propose a rapid Membrane Enabled Bio-Mineral Affinity Screening (MEBAS) approach supported by Mineral Binding Characterization (MBC) (TGA, ATR-FTIR and ζ Potential), while at the "macroscopic" scale, micro scale results are confirmed by Geotechnical Verification (GV) through unconfined compression testing. We illustrate the methodology using an exemplar mine tailings Fe2O3–SiO2 system. Five different biopolymers were tested against Fe2O3: locust bean gum, guar gum, gellan gum, xanthan gum, and sodium carboxymethyl cellulose. The screening revealed that locust bean gum and guar gum have the highest affinity for Fe2O3, which was confirmed by MBC and in agreement with GV. This affinity is attributed to the biopolymer's ability to form covalent C–O–Fe bonds through β-(1,4)-d-mannan groups. Upon their 1% addition to a "macroscopic" Fe2O3 based exemplar MT system, unconfined compressive strengths of 5171 and 3848 kPa were obtained, significantly higher than those for the other biopolymers and non-Fe systems. In the current study, MEBAS gave an approximately 50-fold increase in rate of assessment compared to GV alone. Application of the proposed MEBAS–MBC-GV approach to a broad range of soil/earthwork components and additives is discussed.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.est.0c02001?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.est.0c02001</a>.Typical Mine Tailing ore, mineral composition, and pH (Figure S1); LB, GG, XG, Ge, CMC biopolymer characteristics (Figure S2); UCS of LB & GG stabilized samples upon a variation in initial moisture content (Figure S3); UCS of GG stabilized samples upon a variation in additive solution preparation conditions and curing times (Figure S4); example method to determine biopolymer average monomer molecular weight (Figure S5); typical biopolymer additive solution preparation conditions (Figure S6); schematic showing MEBAS methodology used to quantify biomineral interactions (Figure S7); Moisture Content Retention (%) of biopolymer stabilized samples (Figure S8); Fe2O3 particle characterization (Figure S9); Chemi Doc membrane images post Fe2O3 MEBAS experiments (Figure S10); individual bio-Fe2O3 TGA curves (Figure S11); XG, CMC, and Ge bio-Fe2O3 ATR-FTIR (Figure S12); schematic showing biomineral binding models determined via the MEBAS-MBC framework (Figure S13); circular dichroism of Ge biopolymer solutions (Figure S14); qualitative analysis of LB stabilized samples strength under saturation (Figure S15); table highlighting expected "results per day" using individual MEBAS-MBC-GV techniques (Figure S16) (<a class="ext-link" href="/doi/suppl/10.1021/acs.est.0c02001/suppl_file/es0c02001_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Geotechnical performance of municipal solid waste fines stabilized with xanthan gum and agar gum

Utilization of Cow Bone Waste and Calcium Oxide for the Solidification and Stabilization of MSWI Fly Ash: Towards Sustainable Practices

Measurements of geotechnical properties of municipal solid waste incineration fly ash stabilized by chemical reagents

Improvement in Geotechnical Properties of Soft Filter Cake Stabilized with Autoclaved Aerated Concrete Powder: Experimental Evidence and Micro-Mechanism

Impacts of Alkaline Washing Pretreatment on Municipal Solid Waste Incineration Fly Ash (MSWI FA) and Resulting Geopolymers

Efficacy of Acacia Gum Biopolymer in Strength Improvement of Silty and Clay Soils under Varying Curing Conditions

Wetting–drying effects on the mechanical performance of xanthan gum biopolymer-stabilized soil

Synthesis of Geopolymers Using Municipal Solid Waste Incineration Fly Ash and Construction and Demolition Waste: Mechanical and Thermal Activation

Geo-engineering properties of expansive soil treated with xanthan gum biopolymer

An Experimental Investigation on Use of Xanthan Gum Biopolymer as Additive for Improving the Reinforcement Effect of Biocementation on Sandy Soils

From Bibliometric Analysis to Experimental Validation: Bibliometric and Literature Review of Four Cementing Agents in Soil Stabilization with Experimental Focus on Xanthan Gum

The Optimisation Analysis of Sand-Clay Mixtures Stabilised with Xanthan Gum Biopolymers

Synergistic effects of recycled demolition waste and GGBS-FA based geopolymers on the mechanical properties and stabilization mechanism of high plasticity clay

Bioengineering solutions for expansive soil stabilization using waste materials: An experimental evaluation

Synthesis of geopolymer using municipal solid waste incineration fly ash and steel slag: Hydration properties and immobilization of heavy metals

Study on Synergistic Effect of Xanthan Gum and Sodium Methylsiliconate on Mechanical Strength and Water Stability of Phosphogypsum Road-Based Materials

Guar gum-stabilized soil: a clean, sustainable and economic alternative liner material for landfills

Exploring the geotechnical and microstructural properties of composite mixtures for landfill liner materials: an experimental investigation

Design and Preparation Technology of Green Multiple Solid Waste Cementitious Materials

Biopolymer Stabilization/Solidification of Soils: A Rapid, Micro-Macro, Cross-Disciplinary Approach

Synthesis of metakaolin-based geopolymer foamed materials using municipal solid waste incineration fly ash as a foaming agent