Abstract:Adsorptive properties for Cu (II), Pb (II) and Cd (II) onto an iminodiacetic acid (IDA) chelating resin were systematically investigated at the optimal pH-value in both single and binary solutions using batch experiments. The Langmuir isotherm model and the pseudo second-order rate equation could explain respectively the isotherm and kinetic experimental data for sole-component system with much satisfaction. The maximum adsorption capacity in single system for Cu (II), Pb (II) and Cd (II) was calculated to be 2.27mmol/g, 1.27mmol/g and 0.65mmol/g individually. The initial adsorption rate followed the order as Cu (II)>Pb (II)>Cd (II) at the fixed initial concentration, and for each metal the initial sorption rate increased as the initial concentration increased. In addition, the modified Langmuir model could describe the binary competitive adsorption behavior successfully, with which the interaction coefficient was obtained to follow the order as Cu (II)<Pb (II)<Cd (II). Furthermore, in every case of the investigated three binary systems, the reduction in both the uptake amounts and distribution coefficients testified the antagonistic competitive phenomena. Obviously, this novel IDA-chelating resin possessed of a good selectivity toward Cu (II) over Pb (II) and Cd (II) for the obtained highest separation factor values were up to 21.30 and 133.91 in the range of tested. This interaction mechanism between the favorable component and other metal ions could mainly contribute to the direct displacement impact which be herewith illustrated schematically.

A thermodynamic approach to ion flotation. I. Kinetics of cupric ion flotation with alkylsulfates

REMOVAL OF AQUEOUS Cu(II) WITH NATURAL KAOLIN: KINETICS AND EQUILIBRIUM STUDIES

High Efficient Removal of Cu(II) by a Chelating Resin from Strong Acidic Solutions: Complex Formation and DFT Certification

Characteristics of Equilibrium, Kinetics Studies for Adsorption of Hg(II), Cu(II), and Ni(II) Ions by Thiourea-Modified Magnetic Chitosan Microspheres.

Modeling for Predicting Copper Ion Removal from Aqueous Solution by the Fluidized Adsorption Based on Dimensional Analysis

Adsorption Performances for Aqueous Cu(II) onto Chelating Resin Dowex M-4195: Interaction Mechanism Investigation

Displacement mechanism of binary competitive adsorption for aqueous divalent metal ions onto a novel IDA-chelating resin: isotherm and kinetic modeling.

The effect of triethylenetetraamine (Trien) on the ion flotation of Cu2+ and Ni2+

Investigation of regularities of ion flotation of copper with the use of sodium diethyldithiocarbamate

Study on Spectrophotometric Determination of Trace Copper after Flotation Separation Using Microcrystalline Adsorption System Loaded with Cui

Molecular thermodynamic modeling of specific ion effects on micellization of ionic surfactants

Equilibrium and Kinetics Studies on Adsorption of Cu(II) from Aqueous Solutions Onto a Graft Copolymer of Cross-Linked Starch/acrylonitrile (CLSAGCP)

Removal of Copper(II) from Aqueous Solutions by Biosorption-Flotation

Efficient removal of heavy metals from aqueous solutions using ion flotation technique

Removal of Copper from Industrial Wastewater by Ion Flotation with Sodium Dodecyl Sulfate as Anionic Collector

Efficient Removal of Copper Ion from Wastewater Using a Stable Chitosan Gel Material

Competitive Recovery of Copper Ions Using Ethyl Acetoacetate Modified Chitosan/organo-Functionalized Alginate Hydrogel Beads: Kinetics and Isothermal Sorption Studies

Ion Flotation of Copper(II) and Lead(II) from Environmental Water Samples

Surface complexation model theory application in NaOL and CTAB collector adsorption differences of diaspore and kaolinite flotation

Surface chemistry of dissolved species of cerussite and calcite and its effect on flotation performance

A comparative study of removal of Cu(II) from aqueous solutions by locally low-cost materials: marine macroalgae and agricultural by-products