Abstract:Much progress has been made over the past few decades in resolving the mechanism for the transformation from ordered body-centered-cubic (B2) austenite to monoclinic martensite (B19') in NiTi shape memory alloy, as well as the twinning mechanisms in martensite. However, so far no lattice correspondence analyses on the atomic scale have been conducted, as a result, these mechanisms have not been completely understood in terms of the pathways for reversible phase transition and reversible twinning in martensite. In this work, atomistic simulations were performed to investigate how B2 austenite transforms to B19' martensite and how twins are formed during phase transformation. In particular, lattice correspondence in the structural evolutions was carefully analyzed to reveal the martensitic transformation mechanism and twinning mechanism with much better clarity. The simulation results show that, when martensite grains were nucleated in austenite, they already formed a twin relationship as a natural result of the crystal structure. Thus, self-accommodation is achieved naturally. Coalescence occurred subsequently and some martensite grains grew at the expense of their neighbors, indicating that the interfaces are elastically mobile and their migration is reversible. Eventually twinned martensite vari- ants were created. It is shown that, in the B2 -> B19' transformation, the B19' monoclinic structure can be treated as a distorted hexagonal close-packed (HCP) structure. With this treatment, it is demonstrated that the martensitic transformation is essentially similar to BCC <-> HCP transformation which only involves atomic shuffles and is reversible, and twinning in martensite is essentially similar to {10 (1) over bar2} twinning in HCP metals which only involves atomic shuffles and is reversible as well. Another significant discovery is that the B19' martensite exhibits a very special dual-lattice structure: the relatively weak Ti-Ti bonding of the monoclinic unit cell permits easy reorientation of lattice units. As a result, two differently oriented lattice units co-exist in the same martensite grain which loses long range periodicity, providing an extra degree of freedom for accommodating external and internal strains. These results explain well why B19' martensite is extremely adaptive to straining and why deformation is reversible. (C) 2020 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Linking a completely three-dimensional nanostrain to a structural transformation eigenstrain

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

Recent Electron Microscopy Results on Micro- and Nanostructured Ni-Ti-(X) Shape Memory Alloys

Phase field simulation of martensitic transformation in pre-strained nanocomposite shape memory alloys

Atomic scale modeling of the coherent strain field surrounding Ni4Ti3 precipitate and its effects on thermally-induced martensitic transformation in a NiTi alloy

The influence of dislocations on R-phase transformations in a NiTi shape memory alloy

Insitu Neutron Diffraction Study of Micromechanical Interaction and Phase Transformation in Dual Phase Niti Alloy During Tensile Loading

A One-Dimensional Constitutive Model for NiTi Shape Memory Alloys Considering Inelastic Strains Caused by the R-phase Transformation

A three-dimensional phase-field model for studying the orientation-dependent interface evolution in stress-induced martensitic phase transformation

Revealing the microstructure evolution of the deformed superelastic NiTi wire by EBSD

In-situ synchrotron high energy X-ray diffraction study of micro-mechanical behaviour of R phase reorientation in nanocrystalline NiTi alloy

Design of a V-Ti-Ni alloy with superelastic nano-precipitates

The Nano- And Mesoscopic Cooperative Collective Mechanisms Of Inhomogenous Elastic-Plastic Transitions In Polycrystalline Tini Shape Memory Alloys

In situ TEM studies of the stress-induced martensitic transformation in nanometric NiTi polycrystal strips

Strain Recovery Characteristics And Reverse Transformation Of Deformed Martensite In A Ni-Ti-Nb Wide Hysteresis Shape Memory Alloy

High resolution electron microscopy studies on the interface structure of deformed stress induced martensite variants in a Ti–Ni–Nb shape memory alloy

Intrinsic Micromechanism of Multi-step Structural Transformation in MnNi Shape Memory Alloys

Structural Origin of Reversible Martensitic Transformation and Reversible Twinning in NiTi Shape Memory Alloy

Phase Transformation Behaviors of TiNi Fibers Embedded in an Aluminum Matrix

Topological Modelling of the B2-B19 ' Martensite Transformation Crystallography in NiTi Alloy

Martensitic transformation induced by cooling NiTi wire under various tensile stresses: Martensite variant microstructures, textures, recoverable strains and plastic strains