Simulation Analysis of Vehicle Handing Stability Based on ADAMS/Car

Mai Yuanyuan

Abstract:A multibody simulation approximate model of a vehicle using ADAMS/Car software is established,and a frontrear suspension system,a steering system,the tires and all connectors are studied.Vehicle handing stability under different velocities and initial imports is simulated.This simulation can help design products and reduce a development cycle.

Engineering

What problem does this paper attempt to address?

The Study on the Handling and Stability Test of Vehicles Based on ADMS and WTK

Xing-xing LIU,Xu-jian YANG,Tu-bin SHEN,Xiao-jun ZHOU

DOI: https://doi.org/10.3969/j.issn.1001-4551.2006.04.013

2006-01-01

Abstract:A vehicle model by using the software-ADAMS(Automatic Dynamic Analysis of Mechanical System) was builded,and introduces the principles which the ADAMS/Car(one of the professional modules of ADAMS) used to realize control and analyze.Based on this,the author did the steering wheel impulse input test by using ADAMS/Car,and analyzed the results.The virtual experiment system is created by using the virtual—reality software package WTK under VC compiling environment.By applying the emulation curve obtained by ADAMS to drive the motorcar model in the system,the whole dynamic emulation virtual test system is realized and this provides a new method to evaluate the operation stability of vehicles.
Study of Vehicle Handing Stability Based on ADAMS/Car

Yuguang Li,Changfei Liang,Shufen Wang

DOI: https://doi.org/10.2991/amcce-15.2015.326

2015-01-01

Abstract:Vehicle handling stability is an important factor which affects vehicle safety. In order to study Vehicle handling stability, we established a dynamic virtual prototype model of a car in ADAMS/Car software, and make simulation of the single lane change on different velocity and steering angle. And we can obtain the vehicle track, yaw rate, lateral acceleration...
The Analysis of Amphibious Vehicle Handling Stability Based on ADAMS/Car

Zhi Ming Yan,Jian Jun Cai,Su Qin Qu,Fang Fang Zhai,An Rong Sun,Li Jie Zhao

DOI: https://doi.org/10.4028/www.scientific.net/amr.1006-1007.294

2014-08-01

Advanced Materials Research

Abstract:In this paper, a multi-body dynamics model of amphibious vehicle is established in terms of dynamic simulative software ADAMS/Car. The front and rear suspension system are studied and analyzed respectively. The handling stability performance of front suspension is simulated under step steering input, pulse steering input, steady turning, and meandered test in related to specifications. According to the simulation results, the handling stability of amphibious vehicle is evaluated objectively.

English Else
Road-friendliness of interconnected hydro-pneumatic suspension based on ADAMS/Simulink/AMESim

Jianhua Wei,Heng Du,Xiang Fang,Kun Guo

DOI: https://doi.org/10.3969/j.issn.1000-1298.2010.10.003

2010-01-01

Abstract:The vehicle-generated road damage can be effectively reduced when the relevant parameters of hydro-pneumatic suspension in engineering vehicles are tuned reasonably. Multi-body dynamics model with ADAMS, hydraulic system model with AMESim and spectra of road surface roughness model with Simulink were established based on 4-DOF signal-axis vehicle model with consideration of the nonlinear characteristic of accumulator, fluid resistance, check valve and pipeline in the system. "95 percentage fourth power aggregate force" was used as the criterion for road-friendliness and co-simulation was achieved. The relation between road-friendliness and relevant parameters of interconnected hydro-pneumatic suspension was analyzed through co-simulation. In certain extent, the road damage coefficient first decreased and then increased with the increase of the initial pressure of accumulator and the diameter of damper hole in suspension cylinder. The road damage coefficient decreased with the increase of the total volume of accumulator and the inner diameter of pipe. The length of pipe had little influence on the road damage coefficient.
Vehicle Steering Stability Researched by Redeveloped Module of ADAMS/CAR

Dehui Kong,Guobing Yu

Abstract:To realize the virtual development of the automobile products,a multi-body system dynamics simulation model was built for a certain domestic passenger car by means of a redeveloped module of ADAMS/CAR.According to the national standard and the test evaluation method on the vehicle steering stability,the simulation tests under typical working conditions such as steady steering and steering return-to-straight ability test were performed and discussed.Comparison between the simulation and the real car tests shows that maximum difference of the main parameters was less than 10%.For the performance indexes which were imperfect both in the real car test and in the virtual car simulation,ideal simulation results could be obtained after adjustment of the parameters.

Engineering
The Application of Sensitivity Method in Vehicle Dynamics Analysis

Chuan Yin Tang,Guang Yao Zhao,Wei Zhou,Hua Li

DOI: https://doi.org/10.1109/isdea.2010.63

2010-01-01

Abstract:Aimed at the effect of variable coefficients and the constant coefficients to the system, a quarter-car two degree freedom suspension vibration model is described, with the aid of matlab alternating senior programmable language, the algorithm is gained through function file, the simulation model of the road noise and the suspension system is obtained. Moreover, The one order standard sensitivity function is adopted, the actual model of one quarter-car two degree freedom suspension system is designed, and the standard sensitivity response of vehicle body velocity, body displacement and the tire displacement is analyzed, the sensitive degree of the change of the structure dynamic characteristics variation is studied. The results indicate that the method can improve the design efficiency and reduce the cost of the design.
Modeling and simulation of macpherson suspension for kinematics and elastic kinematics based on ADAMS/Car

Li Wei

Abstract:A model of the macpherson suspension is built by using multi-body system dynamics simulation software ADAMS/Car template.The kinematics and elastic kinematics simulation for the macpherson suspension were carried out under the simulation of parallel wheel travel and comparing with the simulation results.The result shows that the elastic component had apparent effects on wheel location parameters.This can effectively improve vehicle manipulation stability.

Engineering
CAE Analysis Modeling Technique and Application of Car Multi-body System Dynamics

Chang Fang,Lü Zhenhua,Guo Konghui

DOI: https://doi.org/10.3969/j.issn.1000-3703.2009.03.002

2009-01-01

Abstract:The simulation model of complete vehicle performance for a new car was established by using multi-body system dynamics software ADAMS/CAR,then this model was divided into several subsystems,and the models for subsystems were established and validated respectively.The inertia and rubber parts mechanics characteristic parameters of car suspension,powertrain and tire etc were determined based on measurement and finite element method;the flexible body dynamic model of twist beam type rear suspension of the car was built by using modal synthesis method;the kinematics and dynamics pre-analysis of the important subsystems and complete vehicle model validated the complete vehicle dynamics model.
Dynamic Analysis of Car Suspension Using ADAMS/Car for Development of a Software Interface for Optimization

Xiaobin Ning,Cuiling Zhao,Jisheng Shen

DOI: https://doi.org/10.1016/j.proeng.2011.08.1092

2011-01-01

Procedia Engineering

Abstract:The design of a vehicle suspension, which is truly a multi-degree of freedom mechanism, is really challenging. This paper primarily focuses on Kinematics and Dynamic analysis of the system in ADAMS. A specific module of chassis platform is developed to analyze suspension ride comfort on adaptability to different vehicle with ADAMS/Car. The work intention is to make a parametric ADAMS model and then link it to a Knowledge Based Engineering application to facilitate designer to quickly carry out designing iterations in order to reduce development time. The Knowledge Based Engineering software is made using object oriented language called ‘Object Definition Language’ which is developed using VC++ software languages. The module not only carry through parametric modeling of front and rear suspension and other subsystems of chassis quickly and compactly, but also can carry on the analysis and optimization of various factors those have crucial impact on ride comfort. The module offers two test-bend, vehicle virtual simulation test stand and four-post test rig. Finally, the module is applied to analyze two kinds of cars which used chassis platform: front and rear frequency determination, pulse inspiration simulation and Broad simulation. The results show that the chassis platform being adopted by two kinds of cars meet the ride comfort requirements.

English Else
Influence on Simulation Result by Accuracy of Suspension Key Points in ADAMS Full Vehicle Modelling

SHI Xun-liang,WANG Xiao-feng,WU Chao,HOU Yu-jun

DOI: https://doi.org/10.3969/j.issn.1006-0006.2006.06.030

2006-01-01

Abstract:The accuracy of parameters of virtual vehicle model influences the reliability of simulation results,and the most important factor is the error of suspension positioning parameters caused by the vehicle equilibrium analysis.This paper presents a revised method based on the ADAMS multi-body algorithm through theoretical calculation and practical value(validation) for the acquirement of the positioning parameters of suspension key points,which satisfies the design demand and improves the accuracy of vehicle dynamic simulation result.
Modeling and Simulation of Active Front Steering System Based on ADAMS

Yiming Guo,Ying Feng

DOI: https://doi.org/10.1007/978-3-642-25002-6_70

2011-01-01

Abstract:Based on the multi-body dynamics, this paper discusses the modeling process and the kinematic simulation of the Active Front Steering system (AFS) with double planetary gears, and then builds the multi-body vehicle model with the help of ADAMS/Car software. Finally, this paper discusses the riding & handling of the vehicle with AFS by comparison with the traditional steering system. The simulation results show that the AFS can improve the vehicle stability, and the built multi-body dynamics model can provide some references for the further control research of AFS.
Modeling and Kinematics Characteristic Analysis of Twist Beam Rear Suspension Using ADAMS/Car

Ai Hua Tang,Ou Jian,Guo Hong Deng

DOI: https://doi.org/10.4028/www.scientific.net/amr.139-141.1056

2010-10-01

Advanced Materials Research

Abstract:The multi-body system analysis has become one of the main simulation techniques to calculate the kinematics characteristics of a car suspension under wheel travel or to build a virtual prototype model of a vehicle in order to predict the vehicle dynamics performance. The modeling of twist beam rear suspensions is always difficult for the unique structural behavior of this component. A non-linear method based on multi-body dynamics software (ADAMS/Car) was used to represent the twist beam within the suspension system. The kinematics characteristic analysis of the rear suspension was realized by means of ADAMS/Car. The main suspension parameters (toe angle, camber angle and wheel track variation) were calculated by changing wheel travel. The result shows that the method of suspension kinematics analysis by using ADAMS/Car can be used in the design of suspensions conveniently.

English Else
CAE ANALYSIS TECHNIQUES OF AUTOMOTIVE HANDLING AND STABILITY CHARACTERISTICS AND APPLICATIONS

CHANG Fang,LU Zhen-hua,GUO Kong-hui

2009-01-01

Abstract:Based on the automotive multi-body models of a dynamic system as well as according to corresponding experiment standards, the virtual experiments of automotive handling and stability were carried out under conditions of step steering angle input, stable-state cornering and impulse steering angle input, respectively. The simulation methods of automotive handling and stability characteristics by using virtual experiments techniques were implemented and summarized in details. Some key factors affecting the computation accuracy were studied and checked by comparing both results of the experiments and simulations. The optimization of automotive handling and stability characteristics was tried using method of Design of Experiments, and influences of rubber bushing stiffness to the car steering performance under step steering angle input were investigated.
STUDY ON STEERING WHEEL SHIMMY OF A CAR AT HIGH VELOCITY

zhan wenshang,y i lin,liu yan

2000-01-01

Journal of Highway and Transportation Research and Development

Abstract:In this paper based on the multibody system dynamics, a 1/4 - suspension model with 27 DOFs for the car's front MacPherson suspension was built by using the ADAMS software. A series of digital simulation were performed. Then a method to control the steering wheel shimmy of a car at high velocity was put forward. A series of road test have been carried out, which prove that the method is effective.
The Evaluation Method of Vehicle Handling and Stability and Its Application in Vehicle Parameters's Design

YI Hong-hui,XU Cang-su

DOI: https://doi.org/10.3969/j.issn.1001-3997.2006.11.001

2006-01-01

Abstract:This paper introduce the objective evaluation of vehicle handling and stability, and discusses some basic vehicle design parameters which greatly influence the vehicle handling and stability .There are the entire vehicle mass, the position of mass center, cornering stiffness coefficients, steering- system stiffness and steering ratio. Based on the closed— loop evaluation index and the model created in the ADAMS, basic vehicle design parameters can be optimized. Thus , the performance of vehicle handling and stability can be improved.
Integrated Design for Steering System and Suspension

En Guo Dong,Lei Zhang,Li Xue Liang

DOI: https://doi.org/10.4028/www.scientific.net/amm.494-495.159

2014-02-01

Applied Mechanics and Materials

Abstract:A design method of integrated control for suspension system and steering system is proposed based on vehicle ride comfort and handling stability. A car simulation model is built applying the software of MATLAB and ADAMS. The construction and characteristic of the integrated simulation model of the suspension system and steering system is illustrated in detail which uses fuzzy method and PID method. Using the simulation model, body vertical acceleration, roll angle and yaw angular velocity are measured in three status which include no control condition, the individually control for active suspension, and the integration control respectively. The simulation data show that the integrated control method synchronously ensures the ride comfort and handling stability.

English Else
Modelling and Analysis of Off-Road Rally Vehicle using Adams Car

Adams Car,Shreyas

Abstract:— The paper discusses the modelling of a virtual prototype of the suspension and steering sub systems of a physical rally vehicle available on campus. Upon modelling the front and rear suspensions and the steering on Adams Car, the created model is tested for its correctness using Half Vehicle analysis like K and C analysis, and full car analysis like CRC and Maintain Analysis. Furthermore, the front lower control arm is made flexible to see the stresses acting on it to investigate its reason for failure in the actual prototype.

Engineering
Vibration Analysis, Simulation and Optimization of Wishbone Type Independent Front Suspension

YE Ming-qiang,WANG Yun,HU Shu-gen

DOI: https://doi.org/10.3969/j.issn.2095-2953.2005.05.010

2005-01-01

Abstract:This paper analyzed the vibration model of suspension system and simplified the wishbone front suspension properly. According to mechanics of vibration and dynamics of multi-body system, a virtual prototype model of wishbone type independent front suspension was established and simulated on ADAMS. Based on the established model, the parameters of front suspension were optimized to minimize the vibration of front suspension.
Vehicle Suspension K&C Characteristic Simulation Analysis Based on ADAMS

Sheng Qin Li,Chun Bo Yang,Li Zhao

DOI: https://doi.org/10.4028/www.scientific.net/amm.494-495.116

2014-02-01

Applied Mechanics and Materials

Abstract:Vehicle suspension system plays an important role in the influence of whole vehicle handling and riding characteristic, as an important part of vehicle chassis system. In the paper, based on the basic test parameters and relevant modeling data of ex-MacPherson suspension of the sample car, the virtual prototype model of this suspension is built by making use of ADAMS/Car module. According to the requirements of the relevant design, some of the model parameters have been adjusted, on the basis of which, K&C characteristic simulation before and after the adjustment is done. The results show that, after adjustment, the majority of suspension K&C characteristic is satisfied, and improved the kinematics of the suspension system.

English Else
Analysis and Research on Vehicle Handling Stability of the Trapezoidal Link Rear Independent Suspension by ADAMS/CAR

Jin Li Xu,Wang Song

DOI: https://doi.org/10.4028/www.scientific.net/amm.851.352

2016-08-01

Applied Mechanics and Materials

Abstract:Taking the trapezoidal link rear independent suspension which is designed for Crossover as the object of study, the multi-body dynamic analysis software ADAMS/CAR is used to establish the kinematics model and carry out the simulation analysis. And then, study the influence of the suspension system on the vehicle handling stability and make the evaluation under the conditions of wheel travel, applied load and body roll, which provides a basis for optimizing the suspension and improving the handling stability of the trapezoidal link rear independent suspension to the Crossover.

English Else

Simulation Analysis of Vehicle Handing Stability Based on ADAMS/Car

The Study on the Handling and Stability Test of Vehicles Based on ADMS and WTK

Study of Vehicle Handing Stability Based on ADAMS/Car

The Analysis of Amphibious Vehicle Handling Stability Based on ADAMS/Car

Road-friendliness of interconnected hydro-pneumatic suspension based on ADAMS/Simulink/AMESim

Vehicle Steering Stability Researched by Redeveloped Module of ADAMS/CAR

The Application of Sensitivity Method in Vehicle Dynamics Analysis

Modeling and simulation of macpherson suspension for kinematics and elastic kinematics based on ADAMS/Car

CAE Analysis Modeling Technique and Application of Car Multi-body System Dynamics

Dynamic Analysis of Car Suspension Using ADAMS/Car for Development of a Software Interface for Optimization

Influence on Simulation Result by Accuracy of Suspension Key Points in ADAMS Full Vehicle Modelling

Modeling and Simulation of Active Front Steering System Based on ADAMS

Modeling and Kinematics Characteristic Analysis of Twist Beam Rear Suspension Using ADAMS/Car

CAE ANALYSIS TECHNIQUES OF AUTOMOTIVE HANDLING AND STABILITY CHARACTERISTICS AND APPLICATIONS

STUDY ON STEERING WHEEL SHIMMY OF A CAR AT HIGH VELOCITY

The Evaluation Method of Vehicle Handling and Stability and Its Application in Vehicle Parameters's Design

Integrated Design for Steering System and Suspension

Modelling and Analysis of Off-Road Rally Vehicle using Adams Car

Vibration Analysis, Simulation and Optimization of Wishbone Type Independent Front Suspension

Vehicle Suspension K&C Characteristic Simulation Analysis Based on ADAMS

Analysis and Research on Vehicle Handling Stability of the Trapezoidal Link Rear Independent Suspension by ADAMS/CAR