Abstract:Steel fiber is usually used to improve ultra-high-performance fiber-reinforced concrete (UHPFRC) tensile prop-erties and remedy its brittle failure. X-ray CT scanning (X-CT) was used to observe the orientation and distri-bution of steel fibers inside UHPFRC. It revealed that the steel fiber inside UHPFRC distribution angle is not equal probability, and the probability is higher along the pouring direction in uniaxial tensile specimen mold. The uniaxial tensile tests (UTT) of 19 UHPFRC specimens with different fiber volume fractions and aspect ratios were performed to analyze the steel fiber on the tensile response and tension failure patterns of UHPFRC. Test results indicated that with an increase in the volume fraction or aspect ratio of steel fiber, the first-cracking strength, tensile strength and peak tensile strain of UHPFRC increase; while they have different growth rates. In addition, with the increase of volume fraction and aspect ratio, the failure patterns of UHPFRC tension specimens grad-ually changed from brittle failure with single crack to ductile failure with multiple cracks. The stress super-position compositions of tensile strength were different under different failure patterns. Combining mechanical analysis and numerical statistical analysis, prediction equations of the tensile strength of strain softening UHPFRC and pseudo-strain hardening UHPFRC considering the effect steel fiber parameters were respectively proposed. Through the mesoscopic equivalent model analysis of UHPFRC uniaxial tensile specimens, the func-tional relationships between the effect of steel fiber parameters on the first-cracking strength and peak tensile strain were analyzed, and then their prediction equations were proposed, combined with numerical statistical analysis. The calculation accuracy of the series of prediction equations proposed in this paper were verified by the collected literature data. Meanwhile, comparing the prediction equations proposed in this paper with the existing equations in the literature, the equations proposed in this paper were better.

Non-destructive evaluation of the steel fibre content and anisometry in thin UHPFRC elements

Review of Self-Sensing of Damage and Interfacial Evaluation Using Electrical Resistance Measurements in Nano/micro Carbon Materials-Reinforced Composites

Magnetic anisotropy quantification in steel fiber reinforced materials

Real-time self-monitoring and smart bend recognizing of fiber-reinforced polymer composites enabled by embedded magnetic fibers

Real-time Evaluating Temperature-Dependent Interfacial Shear Strength of Thermoplastic Composites Based on Stress Impedance Effect of Magnetic Fibers

A novel approach based on stress-impedance effect to assess the interfacial properties in fiber-reinforced composites

Magnetomechanical Measurements for Nondestructive Evaluation of Failure in Steel Structural Element

Pre-use Interfacial Shear Strength Prediction for Fiber-Reinforced Thermosetting Composites Based on Stress-Impedance Effect of Ferromagnetic Microwires

A Novel Method for Characterizing the Fatigue Crack Propagation of Steel Via the Weak Magnetic Effect

Characterization of Magnetic Field in Crack Propagation Stage and Application to Non-Destructive Evaluation

Non-Destructive Multi-Method Assessment of Steel Fiber Orientation in Concrete

In-situ nonlinear ultrasonic technique for monitoring damage in ultra-high performance fibre reinforced concrete (UHPFRC) during direct tensile test

Quantitative Analysis of Steel Fibers on UHPFRC Uniaxial Tensile Behavior Using X-CT and UTT

Field/stress Tunable Behaviour of Composites Containing the Combined Current-Modulation Annealed Ferromagnetic Microwires

Non-destructive testing method of fiber content in steel fiber reinforced concrete based on magnetization loss

Fibre reinforced concrete under in-plane shear stresses

A New Method to Determine the Steel Fibre Content of Existing Structures—Evaluation and Validation

In Situ Non-Destructive Stiffness Assessment of Fiber Reinforced Composite Plates Using Ultrasonic Guided Waves

Adaptation of an Eddy Current Model for Characterizing Subsurface Defects in CFRP Plates Using FEM Analysis Based on Energy Functional

Detectability Evaluation of Eddy Current Testing Probes for Inspection of Defects in Carbon Fiber Reinforced Polymer Laminates

Investigation of Fiber Orientation of Fused Filament Fabricated CFRP Composites via an External Magnetic Field