Abstract:Mass spectrometry is widely used analytical technique due to its high specificity for analyte identification as well as its high sensitivity.A custom mass spectrometer instrument based on a cylindrical ion trap (CIT)was built and its working parameters were optimized.An electron ionization(EI)source was chosen for experimental simplic-ity and availability of standard EI spectral libraries.The custom designed CIT was con-sisted of a pair of endcap electrodes and a ring electrode(r0=1 0 mm,z0=8.9 7 mm).A high voltage RF signal which needed to be applied directly to the ring electrode to pro-duce appropriate quadrupole was initially created by an RF generator at low voltage.A power amplifier and a voltage amplifier circuit were used to amplify to an appropriate power level.The boundary ej ection method was used.An electron multiplier,a current amplifier and NI PCIe data acquire card made up the ion detection and data acquisition system.The EI source,CIT and electron multiplier (EM)were mounted in a rail which ensured they were aligned precisely.The software designed in LabVIEW controlled the timing of the whole system.Several MATLAB programs were written to perform post-processing operations on saved MS data files.In order to obtain the optimal working pa-rameters,different values of filament current,bias voltage of EI,background pressure, voltage on the EM detector and mass scan rate were tested in the vacuum chamber.The trends of spectral peak were obtained:1)Signal intensity increased with the heating current supplied to the EI source due to the increased electron emission at higher tem-perature;2)The bias voltage of EI affected the kinetic energy of ions.With the increas-ing of the voltage,the signal intensity increased.When the voltage increased to a cer-tain range,the intensity fluctuated.In most common EI sources,a kinetic energy of 70 V was used.So the bias voltage was set as 70 V;3)Both signal intensity and resolution increased when background pressure was increased from 1×10-4to 6×10-4Pa.When the pressure further increased,the performance decreased;4)Signal intensity was pro-portional to the voltage on the EM detector.Considering the signal intensity and the lifetime of EM,a voltage of 1.75 kV was used;5)Mass scan rate had influence on the signal intensity and resolution.When the scan rate was too fast,the various ions bunched together and increased the signal intensity but reduced the resolution.Slowing the scan rate caused the peaks to spread apart resulting in increased resolution.By using the optimized parameters,several experiments were carried out.The results showed that the mass spectrum was accurate and the resolution was about 300.The MS plat-form performed well which laid a foundation of further research.To further improve resolution,axial RF will be applied to the endcap electrode to perform resonance ej ection in the following work and based on this platform the operation method for high-pressure MS will be explored.

Multiple Ion Charge Extraction (MICE) for High-Throughput Charge Detection Mass Spectrometry

Single-Ion Mass Spectrometry for Heterogeneous and High Molecular Weight Samples

Combining Fourier Transform Ion Mobility with Charge Detection Mass Spectrometry for the Analysis of Multimeric Protein Complexes

Digital Ion Trap Isolation and Mass Analysis of Macromolecular Analytes with Multiply Charged Ion Attachment

Real-Time Analysis and Signal Optimization for Charge Detection Mass Spectrometry

Charge Detection Mass Spectrometry for Megadalton Polymer Characterization and Measurement of Electrospray-Generated Charged Droplet Dynamics with a New "Direct Visualization of the Rayleigh Limit" Approach to Aid in m / z Calibration

Improving Sensitivity for Microchip Electrophoresis Interfaced with Inductively Coupled Plasma Mass Spectrometry Using Parallel Multichannel Separation

Coupling Online Size Exclusion Chromatography with Charge Detection-Mass Spectrometry Using Hadamard Transform Multiplexing

UniChromCD for Demultiplexing Time-Resolved Charge Detection-Mass Spectrometry Data

Dynamic Energy Measurements in Charge Detection Mass Spectrometry Eliminate Adverse Effects of Ion-Ion Interactions

Electrokinetic Manipulations Combined With Direct and Ambient Ionization Mass Spectrometry

Controlling Charge States of Peptides Through Inductive Electrospray Ionization Mass Spectrometry.

Straight Nano-Electrospray Ionization and Its Coupling of Mobility Capillary Electrophoresis to Mass Spectrometry

High-sensitivity Ion Mobility Spectrometry/mass Spectrometry Using Electrodynamic Ion Funnel Interfaces.

Ion Bunching in Square-Wave-Driven Mobility Capillary Electrophoresis-Mass Spectrometry.

PHOTODETACHMENT PHOTOELECTRON SPECTROSCOPY OF MULTIPLY CHARGED ANIONS USING ELECTROSPRAY IONIZATION

High-Throughput Mass Spectrometer Using Atmospheric Pressure Ionization and a Cylindrical Ion Trap Array

Research on Key Techniques of Cylindrical Ion Trap Mass Spectrometer and Parameters Optimization

Installation protocol for charge transfer dissociation mass spectrometry on ion trapping mass spectrometers

Low Flow Voltage Free Interface for Capillary Electrophoresis and Mass Spectrometry Driven by Vibrating Sharp-edge Spray Ionization.