Abstract:To reduce carbon emissions associated with substantial concrete usage in construction and achieve the objectives of green and low-carbon construction, this study innovatively develops a low-carbon binary material by adding limestone powder (LP) and silica fume (SF) into the conventional cement-based material, enhancing the comprehensive utility value of LP. The experimental results show that the addition of 15% LP and 5% SF increases the yield stress of the mortar yet substantially reduces the plastic viscosity to 2.84 Nmm·min, representing a 44.5% decrease compared to pure cement slurry. This reduction is conducive to long-distance pumping of the cement-based material. Moreover, the addition of 5% SF compensates for the 18.8% (mid-stage, 28-d) and 15.8% (late-stage, 90-d) strength loss in mortar caused by LP while simultaneously improving the strength of the co-mixed system by 10.4% (mid-stage) and 10.8% (late-stage). In the early-stage measurements of the LP-SF binary cement-based materials, it is observed that while SF slightly increases the hydration heat release, LP suppresses the early hydration heat release. Therefore, the total heat release observed in the 15% LP and 5% SF group after 72 h is only 254 J/g, demonstrating favorable temperature control and crack prevention effects. In addition, X-ray diffraction (XRD) and thermogravimetric/differential thermogravimetric (TG/DTG) phase analysis reveal a notable increase of 53.56% in CH consumption. Besides, the weight loss on ignition of C-S-H crystals increases, indicating that the secondary hydration of LP and the pozzolanic reaction of SF promote the production of C-S-H in the system. Combined with the late-stage strength and water absorption characteristics, it is concluded that the system exhibits good mechanical properties and compactness. This study presents a use of mixed proportion that enables excellent mechanical properties, good pumping performance, and low hydration heat. Moreover, the analysis indicates that the carbon emission of each cubic meter of the as-developed mortar is reduced by approximately 16.7–23.9%, promoting the efficient and clean utilization of LP and SF.

The Role of Limestone Powder in the Corrosion Products of Cement Mortars under Magnesium Sulfate Solution

The Synergy Effect of Limestone Powder and Mineral Admixtures on the Mechanical Property of Mortar

Effect of Limestone Powder and Fly Ash on Magnesium Sulfate Resistance of Mortar

Effect of High Content Limestone Powder on Microstructure and Mechanical Properties of Cement-based Materials

Effect of limestone powder on mechanical properties and microstructure of phosphogypsum

Form and mechanism of sulfate attack on cement-based material made of limestone powder at low water-binder ratio under low temperature conditions

Effects of Dolomitic Limestone on the Properties of Magnesium Oxysulfate Cement

Influence of Mineral Admixtures on the Properties of Magnesium Oxychloride Cement Lean Concrete

Investigating the sulfate resistance of mortars with multiple mineral admixtures in ammonium-magnesium sulfate solution

Influence of Synthetic Limestone Sand on the Frost Resistance of Magnesium Potassium Phosphate Cement Mortar

Strength and Leaching Characteristics of Magnesium Phosphate Cement-Solidified Zinc- Contaminated Soil under the Effect of Acid Rain

Investigation on Hydration and Mechanical Properties of Mortar Containing Limestone Powder and Fly Ash Based on the Coupled Chemical–Thermal–Mechanical Method

Effect of Layered Double Hydroxides on the Deterioration Process of Cement Paste under Sulfate Attack

Effect of Fine Aggregates on Properties of Magnesium Potassium Phosphate Cement Mortar

Effect of Limestone Powder on Microstructure of Concrete

Effects of reactive MgO on durability and microstructure of cement-based materials: Considering carbonation and pH value

Chloride Binding Behavior and Pore Structure Characteristics of Low-Calcium High-Strength Cement Pastes

Examining the early-stage performance and mechanical performance of limestone powder-silica fume binary cement-based materials

Study on the Chloride–Sulfate Resistance of a Metakaolin-Based Geopolymer Mortar

HYDRATION PROPERTIES OF LIMESTONE POWDER IN COMPLEX BINDING MATERIAL

A Study of the Influence of Cement Addition and Humidity on the Mechanical Strength and Microstructure of Flue Gas Desulfurization Gypsum–Cement Plasters