Polymer nanocomposites with high energy storage densities

Yang Shen,Yuanhua Lin,Q.M. Zhang

DOI: https://doi.org/10.1557/mrs.2015.199

IF: 5

2015-09-01

MRS Bulletin

Abstract:Abstract

materials science, multidisciplinary,physics, applied

What problem does this paper attempt to address?

Ultrahigh energy storage performance of a polymer-based nanocomposite via interface engineering

Peng Wang,Zhongbin Pan,Weilin Wang,Jianxu Hu,Jinjun Liu,Jinhong Yu,Jiwei Zhai,Qingguo Chi,Zhonghui Shen

DOI: https://doi.org/10.1039/d0ta10044g

IF: 11.9

2021-01-01

Journal of Materials Chemistry A

Abstract:Multiscale internal/external interfaces are constructed to break the paradox of a high dielectric constant with decreased breakdown strength for superior energy storage capability. An ultrahigh discharged energy density of ∼25.26 J cm −3 is achieved.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Polymer Nanocomposites with Ultrahigh Energy Density and High Discharge Efficiency by Modulating their Nanostructures in Three Dimensions.

Xin Zhang,Jianyong Jiang,Zhonghui Shen,Zhenkang Dan,Ming Li,Yuanhua Lin,Ce-Wen Nan,Longqing Chen,Yang Shen

DOI: https://doi.org/10.1002/adma.201707269

IF: 29.4

2018-01-01

Advanced Materials

Abstract:Manipulating microstructures of composites in three dimensions has been a long standing challenge. An approach is proposed and demonstrated to fabricate artificial nanocomposites by controlling the 3D distribution and orientation of oxide nanoparticles in a polymer matrix. In addition to possessing much enhanced mechanical properties, these nanocomposites can sustain extremely high voltages up to approximate to 10 kV, exhibiting high dielectric breakdown strength and low leakage current. These nanocomposites show great promise in resolving the paradox between dielectric constant and breakdown strength, leading to ultrahigh electrical energy density (over 2000% higher than that of the bench-mark polymer dielectrics) and discharge efficiency. This approach opens up a new avenue for the design and modulation of nanocomposites. It is adaptable to the roll-to-roll fabrication process and could be employed as a general technique for the mass production of composites with intricate nanostructures, which is otherwise not possible using conventional polymer processing techniques.
Giant Energy Density and Improved Discharge Efficiency of Solution‐Processed Polymer Nanocomposites for Dielectric Energy Storage

Xin Zhang,Yang Shen,Ben Xu,Qinghua Zhang,Lin Gu,Jianyong Jiang,Jing Ma,Yuanhua Lin,Ce-Wen Nan

DOI: https://doi.org/10.1002/adma.201503881

IF: 29.4

2016-01-01

Advanced Materials

Abstract:Large-aspect-ratio composite nanofibers with interior hierarchical interfaces are employed to break the adverse coupling of electric displacement and breakdown strength in flexible poly(vinylidene fluoride-hexafluoropropylene) nanocomposite films, a small loading of 3 vol% BaTiO3@TiO2 nanofibers gives rise to the highestenergy density (≈31.2 J cm(-3)) ever achieved in polymer nanocomposites dielectrics.
High Energy Density of Polymer Nanocomposites at a Low Electric Field Induced by Modulation of Their Topological-Structure

Yang Shen,Dashan Shen,Xin Zhang,Jianyong Jiang,Zhenkang Dan,Yu Song,Yuanhua Lin,Ming Li,Ce-Wen Nan

DOI: https://doi.org/10.1039/c6ta02186g

IF: 11.9

2016-01-01

Journal of Materials Chemistry A

Abstract:High energy density at low electric field is achieved for polymer nanocomposites by modulating topological structure.
Enhanced energy storage performance of polymer nanocomposites using hybrid 2D ZnO@MoS2 semiconductive nano-fillers

Fei Wen,Chenglong Zhu,Lili Li,Bing Zhou,Lin Zhang,Chao Han,Weijie Li,Zengji Yue,Wei Wu,Gaofeng Wang,Shujun Zhang

DOI: https://doi.org/10.1016/j.cej.2021.132676

IF: 15.1

2022-02-01

Chemical Engineering Journal

Abstract:Polymer-based nanocomposites with hybrid fillers are expected to possess high energy storage density taking advantage of different morphologies and electric properties of the nanofillers. In this article, hybrid semi-conductive nanofillers with MoS2 two-dimensional (2-D) nanosheets and ZnO zero-dimensional (0-D) nanoparticles in different ratios were fabricated by the wet chemical route and ultrasonic mixing. The ZnO nanoparticles have a good distribution on MoS2 nanosheets confirmed by TEM, XRD, and XPS results. The P(VDF-CTFE-DB)/2 composites with different weight percent of fillers were prepared by solution cast, and the influence of hybrid fillers on polymer matrix was systematically investigated. P(VDF-CTFE-DB) with hybrid filler exhibits optimized discharged energy density of 7.2 J/cm3 and efficiency of 83% at 300 MV/m, both of which are higher than those reported in polymer nanocomposites at the same electric field. Moreover, the distribution of polarization and electric field of the distribution of 2D fillers in four different models for composite P(VDF-CE-DB)/2 with 2 mol% of fillers were investigated by the finite element simulation analysis (COMSOL). In addition, the nanocomposite also possesses high power density and excellent fatigue reliability, demonstrating it can be a good candidate for energy storage device that requires high energy density at a low electric field for safer working conditions.

engineering, chemical, environmental
Synergy of Micro-/Mesoscopic Interfaces in Multilayered Polymer Nanocomposites Induces Ultrahigh Energy Density for Capacitive Energy Storage

Jianyong Jiang,Zhonghui Shen,Jianfeng Qian,Zhenkang Dan,Mengfan Guo,Yue He,Yuanhua Lin,Ce-Wen Nan,Longqing Chen,Yang Shen

DOI: https://doi.org/10.1016/j.nanoen.2019.05.038

IF: 17.6

2019-01-01

Nano Energy

Abstract:High-energy-density dielectric materials are highly desirable for the miniaturization and integration of modern electronics and power modules for applications in electrical power, communication, medical and defense systems. However, the conventional polymer nanocomposites with nanofillers randomly dispersed exhibit a limited energy storage performance (e.g. discharged energy density < 15 J/cm(3) and efficiency < 70%). Here, we demonstrate the multilayer structure as an effective route to polymer nanocomposites that concurrently have ultrahigh discharge energy density and high efficiency. Compared to the random-dispersed nanocomposites, the rationally designed multilayered polymer nanocomposites are capable of integrating the suppressed effects of dielectric/electrode and dielectric/dielectric interfaces on charge injection and migration to remarkably enhance the breakdown strength and are expected to deliver an unprecedentedly high energy density of similar to 35.4 J/cm(3) (an enhancement of similar to 1100% over the bench-mark biaxially-oriented polypropylene). This work provides insight into the design and fabrication of polymer nanocomposite with high energy density and discharge efficiency for capacitive energy storage applications.
Modulating interfacial charge distribution and compatibility boosts high energy density and discharge efficiency of polymer nanocomposites

Tao Zhang,Mengfan Guo,Jianyong Jiang,Xueyou Zhang,Yuanhua Lin,Ce-Wen Nan,Yang Shen

DOI: https://doi.org/10.1039/c9ra06933j

IF: 4.036

2019-01-01

RSC Advances

Abstract:Fluoro-polymer shells concomitantly enhance the energy density and discharge efficiency by active interactions with BTO cores and P(VDF-HFP).

chemistry, multidisciplinary
High Conduction Band Inorganic Layers for Distinct Enhancement of Electrical Energy Storage in Polymer Nanocomposites

Zhu Yingke,Shen Zhonghui,Li Yong,Chai Bin,Chen Jie,Jiang Pingkai,Huang Xingyi

DOI: https://doi.org/10.1007/s40820-022-00902-9

IF: 26.6

2022-01-01

Nano-Micro Letters

Abstract:Dielectric polymer nanocomposites are considered as one of the most promising candidates for high-power-density electrical energy storage applications. Inorganic nanofillers with high insulation property are frequently introduced into fluoropolymer to improve its breakdown strength and energy storage capability. Normally, inorganic nanofillers are thought to introducing traps into polymer matrix to suppress leakage current. However, how these nanofillers effect the leakage current is still unclear. Meanwhile, high dopant (> 5 vol%) is prerequisite for distinctly improved energy storage performance, which severely deteriorates the processing and mechanical property of polymer nanocomposites, hence brings high technical complication and cost. Herein, boron nitride nanosheet (BNNS) layers are utilized for substantially improving the electrical energy storage capability of polyvinylidene fluoride (PVDF) nanocomposite. Results reveal that the high conduction band minimum of BNNS produces energy barrier at the interface of adjacent layers, preventing the electron in PVDF from passing through inorganic layers, leading to suppressed leakage current and superior breakdown strength. Accompanied by improved Young's modulus (from 1.2 GPa of PVDF to 1.6 GPa of nanocomposite), significantly boosted discharged energy density (14.3 J cm(-3)) and charge-discharge efficiency (75%) are realized in multilayered nanocomposites, which are 340 and 300% of PVDF (4.2 J cm(-3), 25%). More importantly, thus remarkably boosted energy storage performance is accomplished by marginal BNNS. This work offers a new paradigm for developing dielectric nanocomposites with advanced energy storage performance.
Double-gradients design of polymer nanocomposites with high energy density

Yu Feng,Jin-Peng Xue,Tian-Dong Zhang,Qing-Guo Chi,Jing-Lei Li,Qing-Guo Chen,Jian-Jun Wang,Long-Qing Chen

DOI: https://doi.org/10.1016/j.ensm.2021.10.008

IF: 20.4

2022-01-01

Energy Storage Materials

Abstract:Polymer dielectrics are encouraging contenders for high-density energy storage applications. The energy density of a polymer dielectric depends on the breakdown strength and dielectric constant. However, a polymer dielectric with a high breakdown strength usually has a low dielectric constant, or vice versa. Therefore, it is critical to perform microstructure design to achieve the optimal energy-storage performance. In this work, we propose to improve the energy density of a polymer nanocomposite by introducing double gradients into the microstructure. More specifically, employed a stochastic model to simulate the microstructure effect on the breakdown strength and revealed that the microstructure with opposite gradients for the two nanofillers can effectively enhance the breakdown strength. Then, we fabricated composites of polyetherimide (PEI) filled with 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3 fibers (BZCTFS) and boron nitride nanosheets (BNNS), where BZCT and BNNS have opposite gradients. The optimal microstructure was shown to have an enhanced breakdown strength of 580 kV/mm and dischargeable energy density of 4.87 J/cm3, which are 38% and 95% higher than those of the pure polymer (420 kV/mm and 2.5 J/cm3), respectively. It is expected that the double-gradients design strategy will be extensively used to engineer the microstructure of polymer nanocomposites to obtain high-energy-density storage.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Research Progress of Ferroelectric Polymer-based Composites with High Energy Density

Junwei ZHA,Mingsheng ZHENG,Zhimin DANG

DOI: https://doi.org/10.13336/j.1003-6520.hve.20170628013

2017-01-01

Abstract:Polymer-based composite dielectric materials with high energy density have potential application in the capacitor field,and many researches focus on ferroelectric materials due to their high permittivity.We discussed the energy storage theory,electric polarization characteristics,charge-discharge efficiency of ferroelectric polymer-based nanocomposite dielectrics that are closely related with energy density,analyzed the energy storage mechanism,and proposed the development prospection.Moreover,we further investigated the main fabrication strategies including surface modifications of nanofillers,ferroelectric polymer-based composites of multi-phase blends,managements of multi-layer structure,the resultant promoted dielectric properties,as well as high energy density.
Polymer-based Nanocomposite Dielectrics with High Energy Storage Capacity

Wanrong JIANG,Yunchuan XIE,Zhicheng ZHANG

DOI: https://doi.org/10.13336/j.1003-6520.hve.20170628019

2017-01-01

Abstract:As the core material of capacitors,dielectrics with high energy storage capacity have extremely important application in advanced equipment of smart grid and high-energy weapons.In order to improve the energy density of polymer dielectrics,composite technology was usually used to fabricate polymer-based nanocomposite dielectrics.We introduced the basic theory and structure model of several composites,and summarized recent research achievements from three key factors,including dielectric constant,electrical breakdown strength,and energy loss.Moreover,we put forward discussions and prospection on the basis of above scientific issues.
Ultrahigh Charge–discharge Efficiency and High Energy Density of a High-Temperature Stable Sandwich-Structured Polymer

Hanxi Chen,Zhongbin Pan,Yu Cheng,Xiangping Ding,Jinjun Liu,Qingguo Chi,Minhao Yang,Jinhong Yu,Zhi-Min Dang

DOI: https://doi.org/10.1039/d1ta08855f

IF: 11.9

2022-01-01

Journal of Materials Chemistry A

Abstract:Sandwich-structured polymer nanocomposites exhibit remarkable capacitive energy storage performance, including high energy density, great charge–discharge efficiency and excellent dielectric stability at elevated temperatures.
High-Energy-Density Ferroelectric Polymer Nanocomposites for Capacitive Energy Storage: Enhanced Breakdown Strength and Improved Discharge Efficiency

Mengfan Guo,Jianyong Jiang,Zhonghui Shen,Yuanhua Lin,Ce-Wen Nan,Yang Shen

DOI: https://doi.org/10.1016/j.mattod.2019.04.015

IF: 24.2

2019-01-01

Materials Today

Abstract:Emerging dielectric composites consisting of polymer and ceramic nano-inclusions or several polymers facilitate the development of capacitive energy storage materials, as they can preserve high breakdown strength and exhibit enhanced dielectric constant. Ferroelectric poly(vinylidene fluoride) (PVDF) and its copolymers have been intensively studied as the matrices because of their high intrinsic dielectric constant and breakdown strength. Here, we review the recent advances on improving the energy density of PVDF-based composite dielectrics. It is concluded that, promotion of energy density is mainly established on enhanced breakdown strength and improved discharge efficiency. The microstructure design, material performance, and mechanism associated with these parameters are described. Perspectives for future development on PVDF-based nanocomposites and application of other potential polymer matrices are presented at last.
Polymer Nanocomposites: Bioinspired Polymer Nanocomposites Exhibit Giant Energy Density and High Efficiency at High Temperature (small 28/2019)

Wenhan Xu,Jie Liu,Tianwu Chen,Xiangyu Jiang,Xiaoshi Qian,Yu Zhang,Zhenhua Jiang,Yunhe Zhang

DOI: https://doi.org/10.1002/smll.201970148

IF: 13.3

2019-01-01

Small

Abstract:In article number 1901582, Xiangyu Jiang, Xiaoshi Qian, Yunhe Zhang, and co-workers fabricate a series of bioinspired nanocomposites by designing multiple interfacial interactions between the wide-gap artificial nanosheets and high glass transition temperature (Tg) polymer matrix. Nanoconfinement effect is utilized in the nanocomposites for enhanced electric energy-storage properties.
Polymer Matrix Nanocomposites with 1D Ceramic Nanofillers for Energy Storage Capacitor Applications

Haibo Zhang,Mohsin Ali Marwat,Bing Xie,Malik Ashtar,Kai Liu,Yiwei Zhu,Ling Zhang,Pengyuan Fan,Chanatip Samart,Zuo-guang Ye

DOI: https://doi.org/10.1021/acsami.9b15005

IF: 9.5

2019-01-01

ACS Applied Materials & Interfaces

Abstract:Recent developments in various technologies, such as hybrid electric vehicles and pulsed power systems, have challenged researchers to discover affordable, compact, and super-functioning electric energy storage devices. Among the existing energy storage devices, polymer nanocomposite film capacitors are a preferred choice due to their high power density, fast charge and discharge speed, high operation voltage, and long service lifetime. In the past several years, they have been extensively researched worldwide, with 0D, 1D, and 2D nanofillers being incorporated into various polymer matrixes. However, 1D nanofillers appeared to be the most effective in producing large dipole moments, which leads to a considerably enhanced dielectric permittivity and energy density of the nanocomposite. As such, this Review focuses on recent advances in polymer matrix nanocomposites using various types of 1D nanofillers, i.e., linear, ferroelectric, paraelectric, and relaxor-ferroelectric for energy storage applications. Correspondingly, the latest developments in the nanocomposite dielectrics with highly oriented, surface-coated, and surface-decorated 1D nanofillers are presented. Special attention has been paid to identifying the underlying mechanisms of maximizing dielectric displacement, increasing dielectric breakdown strength, and enhancing the energy density. This Review also presents some suggestions for future research in low-loss, high energy storage devices.
Polymer Nanocomposite Dielectrics for Electrical Energy Storage

Yang Shen,Xin Zhang,Ming Li,Yuanhua Lin,Ce-Wen Nan

DOI: https://doi.org/10.1093/nsr/nww066

IF: 20.6

2017-01-01

National Science Review

Abstract:Dielectric materials store and release electrical energy electrostatically through dielectric polarization and depolarization by the application and removal of an electric ield（as shown in Fig.1）.As the only energy-storage device that is capable of delivering power density on the order of mega or even giga wats,electrostatic ca-
Gradient-layered Polymer Nanocomposites with Significantly Improved Insulation Performance for Dielectric Energy Storage

Yifei Wang,Yi Li,Linxi Wang,Qibin Yuan,Jie Chen,Yujuan Niu,Xinwei Xu,Qing Wang,Hong Wang

DOI: https://doi.org/10.1016/j.ensm.2019.06.013

IF: 20.4

2020-01-01

Energy Storage Materials

Abstract:Dielectric polymer composites with high power densities and ultrafast charge-discharge rates hold the promise of storing and converting renewable energies to address growing environmental challenges. Many efforts have been devoted to improving the energy storage capability of polymer composites in the past few years. However, there is an ever-existing tradeoff between dielectric permittivity and breakdown strength, which are two key factors determining the energy density. Here, inspired by the hierarchical structure of bamboo culms, the gradient-layered ceramic nanowires/polymer composites are designed and prepared, where the contents of ceramic fillers are increased gradually from the upper to bottom layers. It is demonstrated that the gradient electric fields formed at the interfaces between the adjacent layers play an important role to impede the breakdown process, thus leading to a significantly enhanced breakdown strength even at large amounts of high-dielectric permittivity (k) fillers. Consequently, a remarkable energy density of 17.6 J/cm(3) accompanied with a high charge-discharge efficiency of 71.2% has been obtained, which significantly outperform the traditional single-layered films. This gradient-layered polymer nanocomposite represents a new class of hierarchically-structured multicomponent materials, whose design strategy is applicable to a variety of advanced composites with integrated contradictory characteristics for outstanding combined performance.
Advanced Polymer-Based Insulating Materials with High Energy Storage Density

Zheng Mingsheng,Zha Junwei,Dang Zhimin

DOI: https://doi.org/10.19595/j.cnki.1000-6753.tces.161780

2017-01-01

Abstract:Due to the huge potential of application, the advanced polymer-based insulating materials with high energy storage density have developed fast in the recent years. This paper briefly introduced the importance of these materials, and explained the mechanism of energy storage for dielectrics. The connections between energy density and the properties of these materials were also introduced, such as dielectric permittivity, electric displacement and breakdown strength. The ways to calculate energy density and charge-discharge efficiency were discussed too. Then the recent research developments of dielectric polymers and the dielectric nanocomposites were summarized respectively, focusing on the strategies of fabrication, processing procedure, the microcosmic and macroscopic mechanism analyses and the characterization of materials. Finally, the progress and future perspectives of the polymer-based insulating materials with high energy density were summarized.
Ultrahigh Breakdown Strength and Improved Energy Density of Polymer Nanocomposites with Gradient Distribution of Ceramic Nanoparticles

Yanda Jiang,Xin Zhang,Zhonghui Shen,Xinhui Li,Jingjing Yan,Bao‐Wen Li,Ce‐Wen Nan

DOI: https://doi.org/10.1002/adfm.201906112

IF: 19

2019-11-04

Advanced Functional Materials

Abstract:<p>High‐energy‐density polymer nanocomposites with high‐dielectric‐constant ceramic nanoparticles as the reinforcement exhibit great potential for energy storage applications in modern electronic and electrical systems. However, the decline of breakdown strength by high loading of ceramic nanoparticles hinders this composite approach from sustainable promotion of energy density. In this work, an approach is proposed and demonstrated by constructing gradient distribution of the spherical ceramic nanoparticles in the polymer matrix. These gradient‐structured nanocomposites possess remarkably improved mechanical and electrical behaviors, which give rise to ultrahigh breakdown strength and much‐promoted energy density. Moreover, this enhancement effect can be further enlarged via increasing the grades number of gradient structures. This work provides an effective strategy for developing flexible high‐energy‐density polymer/ceramic nanocomposites for dielectric and energy storage applications.</p>

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
High‐Entropy‐Nanofibers Enhanced Polymer Nanocomposites for High‐Performance Energy Storage

Lvye Dou,Bingbing Yang,Shun Lan,Yiqian Liu,Yiqun Liu,Ce‐Wen Nan,Yuan‐Hua Lin

DOI: https://doi.org/10.1002/aenm.202203925

IF: 27.8

2023-02-13

Advanced Energy Materials

Abstract:High‐entropy‐stabilized Bi2Ti2O7 nanofibers with linear dielectric properties and a high dielectric constant are synthesized, and a high energy density of 6.46 J cm−3 at 150 °C is achieved, by using the high‐entropy fibers as the fillers in polyetherimide composites. This study provides a guideline for the development of dielectric fillers with tunable dielectric properties and microstructures, through a distinctive entropy‐engineering strategy. Polymer composite dielectrics capable of high energy density, high efficiency, and high‐temperature stability are in high demand for application in various electronic vehicles and power systems. A major challenge, however, is the reasonable design of high‐performance nanofillers that are beneficial to the polarization and breakdown strength simultaneously. Here, high‐entropy‐induced ceramic nanofibers with a stable Bi2Ti2O7‐type pyrochlore phase are developed as effective nanofillers to enhance the energy storage performance of polyetherimide (PEI) composites. Benefiting from the linear pyrochlore phase, refined grain size, and increased amorphous fraction of the high‐entropy nanofillers, the resultant PEI composites exhibit significantly improved energy storage performance over a wide temperature range of 25–150 °C. Notably, a high energy density of 6.46 J cm−3 under an electric field of 590 MV m−1 is achieved at 150 °C, which outperforms most of the reported PEI composites. This study provides a guideline for the development of dielectric fillers with tunable dielectric properties and microstructures, thus promoting the development of high‐performance polymer composites.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels

Polymer nanocomposites with high energy storage densities

Ultrahigh energy storage performance of a polymer-based nanocomposite via interface engineering

Polymer Nanocomposites with Ultrahigh Energy Density and High Discharge Efficiency by Modulating their Nanostructures in Three Dimensions.

Giant Energy Density and Improved Discharge Efficiency of Solution‐Processed Polymer Nanocomposites for Dielectric Energy Storage

High Energy Density of Polymer Nanocomposites at a Low Electric Field Induced by Modulation of Their Topological-Structure

Enhanced energy storage performance of polymer nanocomposites using hybrid 2D ZnO@MoS2 semiconductive nano-fillers

Synergy of Micro-/Mesoscopic Interfaces in Multilayered Polymer Nanocomposites Induces Ultrahigh Energy Density for Capacitive Energy Storage

Modulating interfacial charge distribution and compatibility boosts high energy density and discharge efficiency of polymer nanocomposites

High Conduction Band Inorganic Layers for Distinct Enhancement of Electrical Energy Storage in Polymer Nanocomposites

Double-gradients design of polymer nanocomposites with high energy density

Research Progress of Ferroelectric Polymer-based Composites with High Energy Density

Polymer-based Nanocomposite Dielectrics with High Energy Storage Capacity

Ultrahigh Charge–discharge Efficiency and High Energy Density of a High-Temperature Stable Sandwich-Structured Polymer

High-Energy-Density Ferroelectric Polymer Nanocomposites for Capacitive Energy Storage: Enhanced Breakdown Strength and Improved Discharge Efficiency

Polymer Nanocomposites: Bioinspired Polymer Nanocomposites Exhibit Giant Energy Density and High Efficiency at High Temperature (small 28/2019)

Polymer Matrix Nanocomposites with 1D Ceramic Nanofillers for Energy Storage Capacitor Applications

Polymer Nanocomposite Dielectrics for Electrical Energy Storage

Gradient-layered Polymer Nanocomposites with Significantly Improved Insulation Performance for Dielectric Energy Storage

Advanced Polymer-Based Insulating Materials with High Energy Storage Density

Ultrahigh Breakdown Strength and Improved Energy Density of Polymer Nanocomposites with Gradient Distribution of Ceramic Nanoparticles

High‐Entropy‐Nanofibers Enhanced Polymer Nanocomposites for High‐Performance Energy Storage