High Energy Density of Polymer Nanocomposites at a Low Electric Field Induced by Modulation of Their Topological-Structure

Yang Shen,Dashan Shen,Xin Zhang,Jianyong Jiang,Zhenkang Dan,Yu Song,Yuanhua Lin,Ming Li,Ce-Wen Nan

DOI: https://doi.org/10.1039/c6ta02186g

IF: 11.9

2016-01-01

Journal of Materials Chemistry A

Abstract:High energy density at low electric field is achieved for polymer nanocomposites by modulating topological structure.

What problem does this paper attempt to address?

Topological‐Structure Modulated Polymer Nanocomposites Exhibiting Highly Enhanced Dielectric Strength and Energy Density

Penghao Hu,Yang Shen,Yuhan Guan,Xuehui Zhang,Yuanhua Lin,Qiming Zhang,Ce-Wen Nan

DOI: https://doi.org/10.1002/adfm.201303684

IF: 19

2014-01-01

Advanced Functional Materials

Abstract:Dielectric materials with high electric energy densities and low dielectric losses are of critical importance in a number of applications in modern electronic and electrical power systems. An organic–inorganic 0–3 nanocomposite, in which nanoparticles (0‐dimensional) are embedded in a 3‐dimensionally connected polymer matrix, has the potential to combine the high breakdown strength and low dielectric loss of the polymer with the high dielectric constant of the ceramic fillers, representing a promising approach to realize high energy densities. However, one significant drawback of the composites explored up to now is that the increased dielectric constant of the composites is at the expense of the breakdown strength, limiting the energy density and dielectric reliability. In this study, by expanding the traditional 0–3 nanocomposite approach to a multilayered structure which combines the complementary properties of the constituent layers, one can realize both greater dielectric displacement and a higher breakdown field than that of the polymer matrix. In a typical 3‐layer structure, for example, a central nanocomposite layer of higher breakdown strength is introduced to substantially improve the overall breakdown strength of the multilayer‐structured composite film, and the outer composite layers filled with large amount of high dielectric constant nanofillers can then be polarized up to higher electric fields, hence enhancing the electric displacement. As a result, the topological‐structure modulated nanocomposites, with an optimally tailored nanomorphology and composite structure, yield a discharged energy density of 10 J/cm3 with a dielectric breakdown strength of 450 kV mm–1, much higher than those reported from all earlier studies of nanocomposites.
Polymer Nanocomposites with Ultrahigh Energy Density and High Discharge Efficiency by Modulating their Nanostructures in Three Dimensions.

Xin Zhang,Jianyong Jiang,Zhonghui Shen,Zhenkang Dan,Ming Li,Yuanhua Lin,Ce-Wen Nan,Longqing Chen,Yang Shen

DOI: https://doi.org/10.1002/adma.201707269

IF: 29.4

2018-01-01

Advanced Materials

Abstract:Manipulating microstructures of composites in three dimensions has been a long standing challenge. An approach is proposed and demonstrated to fabricate artificial nanocomposites by controlling the 3D distribution and orientation of oxide nanoparticles in a polymer matrix. In addition to possessing much enhanced mechanical properties, these nanocomposites can sustain extremely high voltages up to approximate to 10 kV, exhibiting high dielectric breakdown strength and low leakage current. These nanocomposites show great promise in resolving the paradox between dielectric constant and breakdown strength, leading to ultrahigh electrical energy density (over 2000% higher than that of the bench-mark polymer dielectrics) and discharge efficiency. This approach opens up a new avenue for the design and modulation of nanocomposites. It is adaptable to the roll-to-roll fabrication process and could be employed as a general technique for the mass production of composites with intricate nanostructures, which is otherwise not possible using conventional polymer processing techniques.
Polymer nanocomposites with high energy storage densities

Yang Shen,Yuanhua Lin,Q.M. Zhang

DOI: https://doi.org/10.1557/mrs.2015.199

IF: 5

2015-09-01

MRS Bulletin

Abstract:Abstract

materials science, multidisciplinary,physics, applied
Modulation of Topological Structure Induces Ultrahigh Energy Density of Graphene/ba 0.6 Sr 0.4 TiO 3 Nanofiber/polymer Nanocomposites

Yang Shen,Yuhan Hu,Weiwei Chen,Jianjun Wang,Yuhan Guan,Jiawen Du,Xin Zhang,Jing Ma,Ming Li,Yuanhua Lin,Long-qing Chen,Ce-Wen Nan

DOI: https://doi.org/10.1016/j.nanoen.2015.10.003

IF: 17.6

2015-01-01

Nano Energy

Abstract:Dielectric capacitors have been the major enabler for a number of applications in advanced electronic and electrical power systems due to their capability of ultrafast charging–discharging and ultrahigh power density. High energy density dielectrics are highly desirable in order to reduce the size and cost of dielectric capacitors, which is critical for electrical pulse-power systems and power electronics in electric vehicles. Polymer nanocomposites are promising in raising the low energy density of neat polymer dielectrics of current use. In this study, a class of sandwich-structured nanocomposites are prepared by a facile hot-pressing method. Polyvinylidene fluoride nanomcomposite layers filled with graphene oxide nanosheets coated with TiO2 nanoparticles (G-layers) or Ba0.6Sr0.4TiO3 nanofibers (B-layers) are cast from solution and assembled into sandwich-structured nanocomposites with reversed topological strcuture (BGB & GBG). An ultrahigh energy density of ~14.6J/cm3 is achieved in the BGB nanocomposites. Phase-field simulations reveal the significant implications of topological structure on the dielectric performance of the nanocomposites. By rational design of topological structure and the dielectric property of the individual layers, favorable distribution of local electrical field could be achieved among the constituent layers of the sandwich-structured nanocomposites, giving rise to the concomitant enhancement of electrical polarization and dielectric breakdown strength, and hence ultrahigh energy density.
Enhanced Energy Density of Polymer Nanocomposites at a Low Electric Field Through Aligned BaTiO3 Nanowires

Bing Xie,Haibo Zhang,Qi Zhang,Jiadong Zang,Chao Yang,Qingping Wang,Ming-Yu Li,Shenglin Jiang

DOI: https://doi.org/10.1039/c7ta00513j

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:Significantly enhanced energy density is obtained at a low electric field by embedding aligned BaTiO3 nanowires in a polymer matrix via a new physical-assisted casting method.
Tuning Phase Composition of Polymer Nanocomposites towards High Energy Density and High Discharge Efficiency by Non-Equilibrium Processing.

Jianyong Jiang,Xin Zhang,Zhenkang Dan,Jing Ma,Yuanhua Lin,Ming Li,Ce-Wen Nan,Yang Shen

DOI: https://doi.org/10.1021/acsami.7b07963

IF: 9.5

2017-01-01

ACS Applied Materials & Interfaces

Abstract:Polymer nanocomposite dielectrics with high energy density and low loss are major enablers for a number of applications in modern electronic and electrical industry. Conventional fabrication of nanocomposites by solution routes involves equilibrium process which is slow and results in structural imperfections, hence high leakage current and compromised reliability of the nanocomposites. We propose and demonstrate that a non-equilibrium process, which synergistically integrates electrospinning, hot-pressing and thermal quenching, is capable of yielding nanocomposites of very high quality. In the non-equilibrium nanocomposites of poly(vinylidene fluoride-co-hexafluoropropylene) (P(VDF-HFP)) and BaTiO3 nanoparticles (BTO_nps), an ultrahigh Weibull modulus  of ~ 30 is achieved, which is comparable to the quality of the bench-mark biaxially-oriented polypropylene (BOPP) fabricated with melt-extrusion process by much more sophisticated and expensive industrial apparatus. Favorable phase composition and small crystalline size are also induced by the non-equilibrium process, which leads to concomitant enhancement of electric displacement and breakdown strength of the nanocomposite hence a high energy density of ~ 21 J/cm3. Study on the polarization behavior and phase transformation at high electric field indicates that BTO_nps could facilitate the phase transformation from  to  polymorph at low electric field.
Achieving ultra-high discharge energy density of dielectric polymer nanocomposites by in situ synthesis

Hao Yang,Jiangang Zhou,Huasong Xu,Bin Gou,Rui Wang,Congzhen Xie

DOI: https://doi.org/10.1016/j.mtener.2022.101165

IF: 9.257

2022-12-01

Materials Today Energy

Abstract:Polymer dielectrics are promising dielectric materials for high-energy-density dielectric capacitors owing to their facile processability and high breakdown strength. Currently, the primary method used to prepare nanocomposites involves the combination of polymers and nanoparticles and utilises the high insulation abilities of nanoparticles to limit the migration of carriers to obtain a high breakdown strength and charge–discharge efficiency. However, the dispersion of nanofillers in nanocomposites prepared using traditional methods is unsatisfactory, which not only leads to unsatisfactory energy-storage performance but also limits their applications owing to inconsistent batch-to-batch performance. Herein, nanocomposites with high energy densities are prepared through the in situ synthesis of nanoparticles in polymer solutions. Owing to the uniform dispersion and excellent insulation performance of the nanoparticles, the nanocomposites demonstrated a discharge energy density of 26.5 J/cm3 with a charge–discharge efficiency of 68% at the optimal composition. Additionally, amorphous nanoparticles have a higher energy barrier than crystalline nanoparticles, which can inhibit the carrier transport more effectively to obtain a lower leakage current. Compared with traditional preparation approaches, the as-proposed method for preparing nanocomposites is simple, and the resulting materials exhibit high performance, which is critical for the application of nanocomposites in capacitors.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Highly Enhanced Energy Density Induced by Hetero-Interface in Sandwich-Structured Polymer Nanocomposites

Penghao Hu,Jianjun Wang,Yang Shen,Yuhan Guan,Yuanhua Lin,Ce-Wen Nan

DOI: https://doi.org/10.1039/c3ta11886j

IF: 11.9

2013-01-01

Journal of Materials Chemistry A

Abstract:A novel sandwich-structured polymer-based nanocomposite with different dielectric fillers stacked together was fabricated employing a layer-by-layer casting process. In the sandwich-structured composite poly(vinylidene fluoride)-based film, the outer layer with TiO2 nanoparticles increased the electric displacement while the central layer with paraelectric BaSrTO3 nanofibers maintained the high breakdown strength. Compared with single layer films, the extractable energy density was greatly enhanced in the sandwich-structured film. Instead of solely being stored at the interface between the dielectrics and the electrodes as in a conventional capacitor, charges are also stored at the additional interfaces between the two heterofilm layers within the multilayer dielectric nanocomposite. A numerical simulation was performed to solve the electrostatic equilibrium equation and then to obtain the scenario of charge storage at the hetero interfaces inside the nanocomposite.
Polymer nanocomposites with high energy density and improved charge-discharge efficiency utilizing hierarchically-structured nanofillers

Yushu Li,Yao Zhou,Yujie Zhu,Sang Cheng,Chao Yuan,Jun Hu,Jinliang He,Qi Li

DOI: https://doi.org/10.1039/d0ta01380c

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:Polymer nanocomposites incorporated with high-dielectric-constant nanoparticles are widely studied as the dielectric materials for high-energy-density electrostatic capacitors. However, the associated concerns of the embedded nanoparticles such as local electric field distortion and high leakage current limit the substantial improvement of energy density. In this work, a novel design of hierarchically-structured nanofillers is demonstrated, which show remarkable advantages over conventional high-dielectric-constant nanoparticles for polymer nanocomposites. These hierarchical nanostructures are prepared by covalently tethering the barium titanate (BT) nanoparticles on the basal plane of the two-dimensional boron nitride nanosheets. The grafting density of BT in the hierarchical nanostructures is adjustable such that its dielectric properties can be tuned, and the capacitive energy storage performance of the nanocomposites can be optimized. Both the experimental results and computational simulations prove that the hierarchically-structured nanofillers can effectively suppress the local field distortion and reduce leakage current. The resulting polymer nanocomposite exhibits a high discharged energy density which is 137% greater than that of a conventional nanocomposite with the same content of freely dispersed BT nanoparticles, in addition to a much improved charge-discharge efficiency. The proposed hierarchically-structured nanofillers shed light on the design of polymer nanocomposites with high energy density and high charge-discharge efficiency.
Modulating interfacial charge distribution and compatibility boosts high energy density and discharge efficiency of polymer nanocomposites

Tao Zhang,Mengfan Guo,Jianyong Jiang,Xueyou Zhang,Yuanhua Lin,Ce-Wen Nan,Yang Shen

DOI: https://doi.org/10.1039/c9ra06933j

IF: 4.036

2019-01-01

RSC Advances

Abstract:Fluoro-polymer shells concomitantly enhance the energy density and discharge efficiency by active interactions with BTO cores and P(VDF-HFP).

chemistry, multidisciplinary
High energy density and efficiency achieved in nanocomposite film capacitors via structure modulation

Yi Zeng,Zhong-Hui Shen,Yang Shen,Yuanhua Lin,Ce-Wen Nan

DOI: https://doi.org/10.1063/1.5012006

IF: 4

2018-03-05

Applied Physics Letters

Abstract:Flexible dielectric polymer films with high energy storage density and high charge-discharge efficiency have been considered as promising materials for electrical power applications. Here, we design hierarchical structured nanocomposite films using nonlinear polymer poly(vinylidene fluoride-HFP) [P(VDF-HFP)] with inorganic h-boron nitride (h-BN) nanosheets by electrospinning and hot-pressing methods. Our results show that the addition of h-BN nanosheets and the design of the hierarchical multilayer structure in the nanocomposites can remarkably enhance the charge-discharge efficiency and energy density. A high charge-discharge efficiency of 78% and an energy density of 21 J/cm3 can be realized in the 12-layered PVDF/h-BN nanocomposite films. Phase-field simulation results reveal that the spatial distribution of the electric field in these hierarchical structured films affects the charge-discharge efficiency and energy density. This work provides a feasible route, i.e., structure modulation, to improve the energy storage performances for nanocomposite films.

physics, applied
Ultrahigh energy storage performance of a polymer-based nanocomposite via interface engineering

Peng Wang,Zhongbin Pan,Weilin Wang,Jianxu Hu,Jinjun Liu,Jinhong Yu,Jiwei Zhai,Qingguo Chi,Zhonghui Shen

DOI: https://doi.org/10.1039/d0ta10044g

IF: 11.9

2021-01-01

Journal of Materials Chemistry A

Abstract:Multiscale internal/external interfaces are constructed to break the paradox of a high dielectric constant with decreased breakdown strength for superior energy storage capability. An ultrahigh discharged energy density of ∼25.26 J cm −3 is achieved.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Significant Improvements in Dielectric Constant and Energy Density of Ferroelectric Polymer Nanocomposites Enabled by Ultralow Contents of Nanofillers

Li Li,Jingsai Cheng,Yunyun Cheng,Ting Han,Yang Liu,Yao Zhou,Guanghui Zhao,Yan Zhao,Chuanxi Xiong,Lijie Dong,Qing Wang

DOI: https://doi.org/10.1002/adma.202102392

IF: 29.4

2021-07-24

Advanced Materials

Abstract:Polymer dielectrics with excellent processability and high breakdown strength (Eb) enable the development of high-energy-density capacitors. Although the improvement of dielectric constant (K) of polymer dielectric has been realized by adding high-K inorganic fillers with high contents (>10 vol%), this approach faces significant challenges in scalable film processing. Here, the incorporation of ultralow ratios (<1 vol%) of low-K Cd1−xZnxSe1−ySy nanodots into a ferroelectric polymer is reported. The polymer composites exhibit substantial and concurrent increase in both K and Eb, yielding a discharged energy density of 26.0 J cm−3, outperforming the current dielectric polymers and nanocomposites measured at ≤600 MV m−1. The observed unconventional dielectric enhancement is attributed to the structural changes induced by the nanodot fillers, including transformation of polymer chain conformation and induced interfacial dipoles, which have been confirmed by density function theory calculations. The dielectric model established in this work addresses the limitations of the current volume-average models on the polymer composites with low filler contents and gives excellent agreement to the experimental results. This work provides a new experimental route to scalable high-energy-density polymer dielectrics and also advances the fundamental understanding of the dielectric behavior of polymer nanocomposites at atomistic scales.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
High Conduction Band Inorganic Layers for Distinct Enhancement of Electrical Energy Storage in Polymer Nanocomposites

Zhu Yingke,Shen Zhonghui,Li Yong,Chai Bin,Chen Jie,Jiang Pingkai,Huang Xingyi

DOI: https://doi.org/10.1007/s40820-022-00902-9

IF: 26.6

2022-01-01

Nano-Micro Letters

Abstract:Dielectric polymer nanocomposites are considered as one of the most promising candidates for high-power-density electrical energy storage applications. Inorganic nanofillers with high insulation property are frequently introduced into fluoropolymer to improve its breakdown strength and energy storage capability. Normally, inorganic nanofillers are thought to introducing traps into polymer matrix to suppress leakage current. However, how these nanofillers effect the leakage current is still unclear. Meanwhile, high dopant (> 5 vol%) is prerequisite for distinctly improved energy storage performance, which severely deteriorates the processing and mechanical property of polymer nanocomposites, hence brings high technical complication and cost. Herein, boron nitride nanosheet (BNNS) layers are utilized for substantially improving the electrical energy storage capability of polyvinylidene fluoride (PVDF) nanocomposite. Results reveal that the high conduction band minimum of BNNS produces energy barrier at the interface of adjacent layers, preventing the electron in PVDF from passing through inorganic layers, leading to suppressed leakage current and superior breakdown strength. Accompanied by improved Young's modulus (from 1.2 GPa of PVDF to 1.6 GPa of nanocomposite), significantly boosted discharged energy density (14.3 J cm(-3)) and charge-discharge efficiency (75%) are realized in multilayered nanocomposites, which are 340 and 300% of PVDF (4.2 J cm(-3), 25%). More importantly, thus remarkably boosted energy storage performance is accomplished by marginal BNNS. This work offers a new paradigm for developing dielectric nanocomposites with advanced energy storage performance.
Achieving high energy density at a low electric field of high-temperature sandwich-structured polymer dielectric composite by PVDF crystallinity regulation

Tianran Zhang,Qinzhao Sun,Zepeng Wang,Ruirui Kang,Fang Kang,Rong Xue,Jiping Wang,Lixue Zhang

DOI: https://doi.org/10.1039/d3tc00390f

IF: 6.4

2023-01-01

Journal of Materials Chemistry C

Abstract:Polarization enhanced by PVDF crystallinity regulation, resulting in high energy density at 150 °C.

materials science, multidisciplinary,physics, applied
Significantly enhancing the dielectric constant and breakdown strength of linear dielectric polymers by utilizing ultralow loadings of nanofillers

Li Li,Jingsai Cheng,Yunyun Cheng,Ting Han,Yang Liu,Yao Zhou,Zhubing Han,Guanghui Zhao,Yan Zhao,Chuanxi Xiong,Lijie Dong,Qing Wang

DOI: https://doi.org/10.1039/d1ta05408b

IF: 11.9

2021-01-01

Journal of Materials Chemistry A

Abstract:Dielectric polymer nanocomposites with ultralow content of nanofillers exhibit remarkable enhancements in dielectric constant and breakdown strength, yielding high discharged energy densities and efficiencies.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Double-gradients design of polymer nanocomposites with high energy density

Yu Feng,Jin-Peng Xue,Tian-Dong Zhang,Qing-Guo Chi,Jing-Lei Li,Qing-Guo Chen,Jian-Jun Wang,Long-Qing Chen

DOI: https://doi.org/10.1016/j.ensm.2021.10.008

IF: 20.4

2022-01-01

Energy Storage Materials

Abstract:Polymer dielectrics are encouraging contenders for high-density energy storage applications. The energy density of a polymer dielectric depends on the breakdown strength and dielectric constant. However, a polymer dielectric with a high breakdown strength usually has a low dielectric constant, or vice versa. Therefore, it is critical to perform microstructure design to achieve the optimal energy-storage performance. In this work, we propose to improve the energy density of a polymer nanocomposite by introducing double gradients into the microstructure. More specifically, employed a stochastic model to simulate the microstructure effect on the breakdown strength and revealed that the microstructure with opposite gradients for the two nanofillers can effectively enhance the breakdown strength. Then, we fabricated composites of polyetherimide (PEI) filled with 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3 fibers (BZCTFS) and boron nitride nanosheets (BNNS), where BZCT and BNNS have opposite gradients. The optimal microstructure was shown to have an enhanced breakdown strength of 580 kV/mm and dischargeable energy density of 4.87 J/cm3, which are 38% and 95% higher than those of the pure polymer (420 kV/mm and 2.5 J/cm3), respectively. It is expected that the double-gradients design strategy will be extensively used to engineer the microstructure of polymer nanocomposites to obtain high-energy-density storage.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
High Energy Density Performance of Polymer Nanocomposites Induced by Designed Formation of BaTiO3@sheet-likeTiO2 Hybrid Nanofillers

Ran Su,Zhengdong Luo,Dawei Zhang,Yang Liu,Zhipeng Wang,Junning Li,Jihong Bian,Yanxi Li,Xinghao Hu,Jinghui Gao,Yaodong Yang

DOI: https://doi.org/10.1021/acs.jpcc.6b01853

2016-01-01

Abstract:Nanocomposites incorporating inorganic nanoparticles (NPs) within ferroelectric polymeric matrices have great potential for high density energy capacitors, In this strategy, employing the nanostructures with specially designed morphology as fillers would notably improve the energy storage. However, this strategy is extremely challenging and has not been largely explored. Here, the BaTiO3@sheet-likeTiO(2) core shell NPs have been successfully synthesized, and can be well-dispersed into polyvinylidene fluoride (PVDF) matrices. The nanocomposites with the volume fraction 2.5% BT@TiO2 NPs have higher the electric displacement (6.0 mu m/cm(2)) than that of PVDF films with the 2.5 vol % BaTiO3 (BT) NPs (5.1 mu m/cm(2)) under the same electric field of 350 kV/mm, which is mainly ascribed to the hierarchical interfacical polarization induced by the large surface area of TiO2 sheet assembled on BT NPs in the nanocomposites. Simultaneously, the medium permittivity TiO2 with medium er as a buffer layer between the BT NPs and polymer matrix could minimize the inhomogeneous electric field in the nanocomposites, which results in the enhancement of the breakdown strength (490-kV/mm with 2.5 vol % BT@TiO2 NPs) compared to "pristine PVDF. As a result of a gratifying E-B and D; the energy density of the nanocomposites with 2.5 vol % BT@TiO2 NPs reached 17.6 J/cc.
Interface-Strengthened Polymer Nanocomposites with Reduced Dielectric Relaxation Exhibit High Energy Density at Elevated Temperatures Utilizing a Facile Dual Crosslinked Network.

Jie Liu,Zhonghui Shen,Wenhan Xu,Yu Zhang,Xiaoshi Qian,Zhenhua Jiang,Yunhe Zhang

DOI: https://doi.org/10.1002/smll.202000714

IF: 13.3

2020-01-01

Small

Abstract:High-temperature ceramic/polymer nanocomposites with large energy density as the reinforcement exhibit great potential for energy storage applications in modern electronic and electrical power systems. Yet, a general drawback is that the increased dielectric constant is usually achieved at the cost of decreased breakdown strength, thus leading to moderate improvement of energy density and even displaying a marked deterioration under high temperatures and high electric fields. Herein, a new strategy is reported to simultaneously improve breakdown strength and discharged energy density by a step-by-step, controllable dual crosslinking process, which constructs a strengthened interface as well as reduces molecular chains relaxation under elevated temperatures. Great breakdown strength and discharged energy density is achieved in the dual crosslinked network BT-BCB@DPAES nanocomposites at elevated temperatures when compared to noninterfacial-strengthened, BT/DPAES composites, i.e., an enhanced breakdown strength and a discharged energy density of 442 MV m-1 and 3.1 J cm-3 , increasing by 66% and 162%, and a stable cyclic performance over 10 000 cycles is demonstrated at 150 °C. Moreover, the enhancement through the synergy of two crosslinked networks is rationalized via a comprehensive phase-field model for the composites. This work offers a strategy to enhance the electric storage performances of composites at high temperatures.
Ultrahigh discharge efficiency in multilayered polymer nanocomposites of high energy density

Jianyong Jiang,Zhonghui Shen,Jianfeng Qian,Zhenkang Dan,Mengfan Guo,Yuanhua Lin,Ce-Wen Nan,Longqing Chen,Yang Shen

DOI: https://doi.org/10.1016/j.ensm.2018.09.013

IF: 20.4

2019-03-01

Energy Storage Materials

Abstract:Poly(vinylidene fluoride) (PVDF)-based dielectric polymers are in great demand for the future electronic and electrical industry because of their high dielectric constants and energy density. However, some issues that limit their practical applications remain unsolved. One of the most urgent issues is their high dielectric loss and hence low efficiency. In this contribution, we proposed and demonstrate that substantially enhanced discharge efficiency of PVDF-based polymers nanocomposites could be achieved by simultaneously optimizing their topological-structure and phase composition. In the poly(vinylidene fluoride-co-hexafluoropropylene) (P(VDF-HFP))/poly(vinylidene fluoride-ter-trifluoroethylene-ter-chlorofluoroethylene) (P(VDF-TrFE-CFE)) multilayered nanocomposites fabricated by non-equilibrium process, an ultrahigh discharge efficiency of ~85% is achieved up to 600 MV/m, which is the highest discharge efficiency reported so far for any polar-polymer dielectric materials at such high electric field. By adjusting the quenching temperature, the phase-composition hence dielectric permittivity in the terpolymer layers could be tuned for suppressed ferroelectric loss. Results of phase-field simulations further reveal that local electric field is substantially weakened at the interfaces between the Co/Ter polymer layers, which will act as barriers to motion of charge carriers and give rise to much suppressed conduction loss and a remarkably enhanced breakdown strength. Synergy of the optimized topological-structure and phase-composition thus leads to a nanocomposite that exhibits an unprecedented high discharge efficiency of the multilayered nanocomposites that is comparable to the bench-mark biaxially oriented polypropylene (BOPP) at high electric field as well as a high discharge energy density that is over 10 times higher than that of BOPP.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology

High Energy Density of Polymer Nanocomposites at a Low Electric Field Induced by Modulation of Their Topological-Structure

Topological‐Structure Modulated Polymer Nanocomposites Exhibiting Highly Enhanced Dielectric Strength and Energy Density

Polymer Nanocomposites with Ultrahigh Energy Density and High Discharge Efficiency by Modulating their Nanostructures in Three Dimensions.

Polymer nanocomposites with high energy storage densities

Modulation of Topological Structure Induces Ultrahigh Energy Density of Graphene/ba 0.6 Sr 0.4 TiO 3 Nanofiber/polymer Nanocomposites

Enhanced Energy Density of Polymer Nanocomposites at a Low Electric Field Through Aligned BaTiO3 Nanowires

Tuning Phase Composition of Polymer Nanocomposites towards High Energy Density and High Discharge Efficiency by Non-Equilibrium Processing.

Achieving ultra-high discharge energy density of dielectric polymer nanocomposites by in situ synthesis

Highly Enhanced Energy Density Induced by Hetero-Interface in Sandwich-Structured Polymer Nanocomposites

Polymer nanocomposites with high energy density and improved charge-discharge efficiency utilizing hierarchically-structured nanofillers

Modulating interfacial charge distribution and compatibility boosts high energy density and discharge efficiency of polymer nanocomposites

High energy density and efficiency achieved in nanocomposite film capacitors via structure modulation

Ultrahigh energy storage performance of a polymer-based nanocomposite via interface engineering

Significant Improvements in Dielectric Constant and Energy Density of Ferroelectric Polymer Nanocomposites Enabled by Ultralow Contents of Nanofillers

High Conduction Band Inorganic Layers for Distinct Enhancement of Electrical Energy Storage in Polymer Nanocomposites

Achieving high energy density at a low electric field of high-temperature sandwich-structured polymer dielectric composite by PVDF crystallinity regulation

Significantly enhancing the dielectric constant and breakdown strength of linear dielectric polymers by utilizing ultralow loadings of nanofillers

Double-gradients design of polymer nanocomposites with high energy density

High Energy Density Performance of Polymer Nanocomposites Induced by Designed Formation of BaTiO3@sheet-likeTiO2 Hybrid Nanofillers

Interface-Strengthened Polymer Nanocomposites with Reduced Dielectric Relaxation Exhibit High Energy Density at Elevated Temperatures Utilizing a Facile Dual Crosslinked Network.

Ultrahigh discharge efficiency in multilayered polymer nanocomposites of high energy density