Abstract:A novel technical solution about helically coiled tube-in-tube (HCTT) heat exchanger with double cooling source is proposed to obtain regeneratively cooled air for advance aeroengine. 54 simulation runs are performed according the Box-Behnken design table, in which the effect of geometrical and operating parameters on performance of heat exchanger are well considered. Grid independence was carefully carried out referring to ASME V&V 20–2009. The simulation model is validated based on comparison with available experimental data and analysis of flow pattern. The performance of the HCTT heat exchanger i.e. entropy generation number Ne, absorption heat ratio of the inner tube η, and out temperature of the regeneratively cooled air Ta,out were evaluated using Response Surface Methodology. The significance of each term in regression model has been checked by analysis of variance. The results shows that all the design variables are significant for predicting Ne, η, and Ta,out, except non-dimensional coil pitch λ for finding η; the regression models have a good prediction performance; outer tube curvature ratio (δo) is the most significant structure parameter affecting Ne and Ta,out, while inner tube curvature ratio (δi) is the most significant linear term for predicting η, indicating that δo and δi are key structure parameters. It also shows that heat transfer characteristics of the HCTT heat exchanger are complicated engineering problem subjected to multi factors interaction. For instance, total number of terms in model for predicting η reaches to 18, including 5 linear terms, 10 interaction terms along with 3 square terms. The influences of all interaction terms on Ne, η, and Ta,out were displayed using 3D surface graph, the effect rule of interaction terms were discussed in details. Desirability function approach was employed to conduct multi-objective optimization for goals of Ta,out = 630 K, and minimum Ne and η. The optimum values of design variable were obtained. This method possesses practical significances for prediction and optimization of HCTT heat exchanger.

Multivariate optimization and sensitivity analyses of relevant parameters on efficiency of scraped surface heat exchanger

Multi-objective Optimization of Transpiration Cooling for High Pressure Turbine Vane

Multi-objective optimization and sensitivity analysis of offset strip fin compact heat exchangers

Analysis, prediction and multi-objective optimization of helically coiled tube-in-tube heat exchanger with double cooling source using RSM

Parametric optimization of a spiral ground heat exchanger by response surface methodology and multi-objective genetic algorithm

Performance Analysis and Multi-Objective Optimization of an Offset Plate-Fin Crossflow Heat Exchanger

Experimental investigation and multi-objective optimization of a novel multi-fluid heat exchanger performances using response surface methodology and genetic algorithm

Optimized design of Helical-Finned Double Pipe heat exchangers via numerical simulation and Artificial Intelligence

HEAT EXCHANGER STUDY AND OPTIMIZATION APPROACH FOR ENGINE EFFICIENCY IMPROVEMENT

Multi-objective optimization research of printed circuit heat exchanger based on RSM and NSGA-II

Single- and multi-objective optimization of a plate-fin heat exchanger with offset strip fins adopting the genetic algorithm

Experimental and Numerical Optimization Study on an Airfoil-Shaped Heat Exchanger

Analysis of the performance optimisation parameters of shell and tube heat exchanger using CFD

Three-dimensional analysis for optimizing thermo-hydrodynamic performance of heat exchangers with perforated semi-circular inserts

Numerical Simulation and Sensitivity Analysis Using RSM on Natural Convective Heat Exchanger Containing Hybrid Nanofluids

Experimental and statistical analysis on the effects of fouling and effective parameters on performance of heat exchanger

Multi-objective optimization of a plate heat exchanger thermal energy storage with phase change material

Numerical Study And Optimization Of Corrugation Height And Angle Of Attack Of Vortex Generator In The Wavy Fin-And-Tube Heat Exchanger

Optimization of thermal and flow characteristics of plate heat exchanger with variable structure parameter

Performance optimization for an optimal operating condition for a shell and heat exchanger using a multi-objective genetic algorithm approach

Multidisciplinary Sensitivity Analysis of the Cooling System of a High-Pressure Turbine Blade in the Pre-Design Phase