Abstract:Purpose The purpose of this study is to investigate the effects of nanoadditive lubricants on the vibration and noise characteristics of helical gears compared with conventional lubricants. The experiment aims to analyze whether nanoadditive lubricants can effectively reduce gear vibration and noise under different speeds and loads. It also analyzes the sensitivity of the vibration reduction to load and speed changes. In addition, it compares the axial and radial vibration reduction effects. The goal is to explore the application of nanolubricants for vibration damping and noise reduction in gear transmissions. The results provide a basis for further research on nanolubricant effects under high-speed conditions. Design/methodology/approach Helical gears of 20CrMnTi were lubricated with conventional oil and nanoadditive oils. An open helical gearbox with spray lubrication was tested under different speeds (200–500 rpm) and loads (20–100 N·m). Gear noise was measured by a sound level meter. Axial and radial vibrations were detected using an M+P VibRunner system and fast Fourier transform analysis. Vibration spectrums under conventional and nanolubrication were compared. Gear tooth surfaces were observed after testing. The experiment aimed to analyze the noise and vibration reduction effects of nanoadditive lubricants on helical gears and the sensitivity to load and speed. Findings The key findings are that nanoadditive lubricants significantly reduce the axial and radial vibrations of helical gears under low-speed conditions compared with conventional lubricants, with a more pronounced effect on axial vibrations. The vibration reduction is more sensitive to rotational speed than load. At the same load and speed, nanolubrication reduces noise by 2%–5% versus conventional lubrication. Nanoparticles change the friction from sliding to rolling and compensate for meshing errors, leading to smoother vibrations. The nanolubricants alter the gear tooth surfaces and optimize the microtopography. The results provide a basis for exploring nanolubricant effects under high speeds. Originality/value The originality and value of this work is the experimental analysis of the effects of nanoadditive lubricants on the vibration and noise characteristics of hard tooth surface helical gears, which has rarely been studied before. The comparative results under different speeds and loads provide new insights into the vibration damping capabilities of nanolubricants in gear transmissions. The findings reveal the higher sensitivity to rotational speed versus load and the differences in axial and radial vibration reduction. The exploration of nanolubricant effects on gear tribological performance and surface interactions provides a valuable reference for further research, especially under higher speed conditions closer to real applications. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-07-2023-0220/

Effect of lubricants on the rotational transmission between solid-state gears

Mechanical Transmission of Rotation for Molecule Gears and Solid-State Gears

Atomistic Modelling of Energy Dissipation in Nanoscale Gears

Influence of Nanoparticles in Lubricant on Sliding Contact of Atomic Rough Surfaces—A Molecular Dynamics Study

Mechanical Transmission of Rotational Motion between Molecular-Scale Gears

Effects of lubrication on gear performance: A review

Interlocking Molecular Gear Chains Built on Surfaces.

Evolution of tooth surface morphology and tribological properties of helical gears during mixed lubrication sliding wear

Lubrication Performance of Helical Gear Pair Under Dynamic Load Based on Local Involute Profile

Surface phonon induced rotational dissipation for nanoscale solid-state gears

Wear Simulations of Involute Harmonic Gear Under Mixed Lubrication Condition

Molecular Dynamics Simulation of the Effect of Nanoparticles on the Tribological Properties of Lubricant Film

Influence of coating material on elastohydrodynamic lubrication between gear meshing interfaces based on direct coupling solution

Effect of lubricant viscosity on dynamics of high-precision gear considering lubricant-induced backlash reduction

Parametric Studies of Lubrication Performance of A Helical Gear Pair with Non-Newtonian Fluids

Key Parameters and Experimental Study of High-Speed Rotating Meshing Gear Injection Lubrication Based on Moving Particle Semi-Implicit Method

Hydrodynamic Lubrication in a Nanoscale Bearing

Interlocking Mechanism between Molecular Gears Attached to Surfaces

Research on the dynamic performance of double-helical planetary gear transmission under friction and wear

Experimental analysis of vibration and noise characteristics of helical gears with nano-lubricant additives