Abstract:The employment of nanoparticle additives in engine oil provides an effective technique for improvement in engine performance and emission. In this study, graphene, graphene–MWCNT, and graphene–SiO2 hybrid nanoparticles have been dispersed in engine oil (n‐decane) to measure the effects of microscopic characteristics of interfacial layer between the carbon–carbon, carbon–hydrogen, carbon–oxygen, and hydrogen–oxygen molecules under fixed shear rate 600 s−1. The boundary lubrication conditions are depicted with nanoindentation operation, in which interaction between the atoms generates the molecular forces under indentation and scratching operation that provide the nucleation and propagation of dislocation in the planes. The result shows that in an early stage of nanoindentation, plastic deformation occurs in the lubricant substrate around the indenter. Furthermore, forces generated in the z‐direction have a significant effect as compared with the forces x‐ and y‐directions. Nanoindentation results concluded that for graphene–MWCNT/engine oil (n‐decane) nanoparticles, at a volume fraction of 1.8%, the nanoparticles outperformed all other nanolubricants. At a volume fraction of 0.3%, the adhesion between the solid and liquid interface was increased by 2.5% graphene nanolubricant, 4% graphene–MWCNT nanolubricant, and 8% graphene–SiO2 nanolubricant. At 1.8% volume fraction, 240% increase in graphene–MWCNT nanolubricant, 72% increase in graphene nanolubricant, and 20% increase in graphene–SiO2 nanolubricant. This trend indicates that the performance of graphene SiO2 nanolubricants is superior at low‐volume fractions, whereas the performance of graphene nanolubricants and graphene–MWCNT nanolubricants is superior at high‐volume fractions. Also we observed the scratching effect of indenter on nanolubricants.

Multi-response Optimization of Tribological Characteristics for Graphene-Gear Oil Nanolubricants Using Grey-Taguchi Methodology Followed by Scrutinization of Lubrication Mechanisms

Tribological evaluation of steel–steel contact surface lubricated by graphene nanoparticle-enhanced lubricant

Enhancing the tribological properties of hydraulic oil-based nanolubricants using MWCNT-SiO2 hybrid nanoparticles

Evaluation of tribological efficacy and EP lubricity properties of gear oil (EP90) energized with molybdenum disulfide (MoS2) nano-additives

Tribological Performance Evaluation of Greases on a Four-Ball Tester with Graphene Oxide Nanoparticles

Exploring the potential of graphene nanoplatelets as a lubricant additive: Topography evolution and performance under boundary lubrication conditions

Tribological and Vibration Studies on Newly Developed Nanocomposite Greases Under Boundary Lubrication Regime

Tribological investigations of 2D nanostructured lamellar materials as additives to castor oil-derived lithium grease

Performance Study of Graphene-Zinc Oxide Hybrid Nanolubricants under Various Test Conditions

Tribological Characteristics of GNPs and HNTs as Lubricant Additives in an Aluminum-Based Hybrid Composite-Steel Contact

Graphene Oxide Nanosheets as Effective Friction Modifier for Oil Lubricant: Materials, Methods, and Tribological Results

Tribological and rheological properties of the lubricant containing hybrid graphene nanosheets (GNs)/titanium dioxide (TiO2) nanoparticles as an additive on calcium grease

Investigating Tribological Properties of Electrophoretically Deposited Graphene Nanoplatelets Coatings on Mild Steel

Friction-reducing and anti-wear properties of 3D hierarchical porous graphene/multi-walled carbon nanotube in castor oil under severe condition: Experimental investigation and mechanism study

Experimental Investigation on the Tribological and Rheological Properties of Graphene and FMWCNT Based Nanolubricants with CTAB Surfactants

Ultralow Concentration of Graphene Oxide Nanosheets As Oil-Based Lubricant Additives

Effect of Graphene-Based Nanoadditives on the Tribological and Rheological Performance of Paraffin Grease

An Investigation on Tribological Properties and Lubrication Mechanism of Graphite Nanoparticles as Vegetable Based Oil Additive

Molecular dynamics simulation on engine oil nanolubricant boundary lubrication conditions

Effects of Thickness and Particle Size on Tribological Properties of Graphene as Lubricant Additive

Tribological Properties of Lubricating Oil with Sheet Graphite Nanoparticles