Abstract:The practical applications of perovskite solar cells (PSCs) are limited by further improvement of their stability and performance. Additive engineering and interface engineering are promising medicine to cure this stubborn disease. Herein, an alkali metal fluoride as an additive is introduced into the tin oxide (SnO2) electron transport layer (ETL). The formation of coordination bonds of F– ions with the oxygen vacancy of Sn4+ ions decreases the trap-state density and improves the electron mobility; the hydrogen bond interaction between the F ion and amine group (FA+) of perovskite inhibits the diffusion of organic cations and promotes perovskite (PVK) stability. Meanwhile, the alkali metal ions (K+, Rb+, and Cs+) permeated into PVK fill the organic cation vacancies and ameliorate the crystal quality of PVK films. Consequently, a SnO2-based planar PSC exhibits a power conversion efficiency (PCE) of 20.24%, while the PSC modified by CsF achieves a PCE of 22.51%, accompanied by effective enhancement of stability and negligible hysteresis. The research results provide a typical example for low-cost and multifunctional additives in high-performance PSCs.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c16519.Top-view SEM images (Figure S1); K 2p, Rb 3d, and Cs 3d core-range XPS spectra (Figure S2); Figure S3: high-resolution XPS spectra of F 1s. Figure S4: fitted high-resolution XPS spectra of Sn 3d. Figure S5: EDS mapping image. Figure S6: XPS spectra of Cs 3d. Figure S7: dark I–V curves of electron-only devices. Figure S8: UPS spectra. Figure S9: distribution histogram of PCEs for devices. Figure S10: J–V curves of PSCs. Table S1: main parameters of the Sn 3d peak. Table S2: main parameters of the O 1s peak. Table S3: TRPL parameters of perovskite. Table S4: resistance data of different ETLs. Table S5: conductivity for different ETLs. Table S6: average PCEs of PSCs. Table S7: statistics of photovoltaic data of PSCs (PDF)This article has not yet been cited by other publications.

Femtosecond Laser Annealing of Fluorine-doped Tin Oxide Films towards High-performance Perovskite Photovoltaics

A Facile Interface Engineering Method to Improve the Performance of FTO/ZnO/CsPbI 3− X Br X ( X < 1)/C Solar Cells

Direct Laser Interference Patterning of Fluorine‐Doped Tin Oxide as a Pathway to Higher Efficiency in Perovskite Solar Cells

Ion Implantation Modified Fluorine-doped Tin Oxide by Zirconium with Continuously Tunable Work Function and Its Application in Perovskite Solar Cells.

Surface Morphology and Photoelectric Properties of Fluorine-Doped Tin Oxide Thin Films Irradiated with 532 Nm Nanosecond Laser

Chlorinated Fluorine Doped Tin Oxide Electrodes with High Work Function for Highly Efficient Planar Perovskite Solar Cells

Ultrafast and Scalable Laser‐Induced Crystallization of Titanium Dioxide Films for Planar Perovskite Solar Cells

Composition and Energy Band–Modified Commercial FTO Substrate for in Situ Formed Highly Efficient Electron Transport Layer in Planar Perovskite Solar Cells

Highly efficient and stable perovskite solar cells enabled by a fluoro-functionalized TiO2 inorganic interlayer

In Situ Surface Fluorination of TiO 2 Nanocrystals Reinforces Interface Binding of Perovskite Layer for Highly Efficient Solar Cells with Dramatically Enhanced Ultraviolet‐Light Stability

In Situ Surface Fluorination of TiO2 Nanocrystals Reinforces Interface Binding of Perovskite Layer for Highly Efficient Solar Cells with Dramatically Enhanced Ultraviolet‐Light Stability

Facilitating the formation of SnO<sub>2</sub> film via hydroxyl groups for efficient perovskite solar cells

Laser-assisted Preparation and Photoelectric Properties of Grating-Structured Pt/FTO Thin Films

Photoexcitation-induced passivation of SnO2 thin film for efficient perovskite solar cells

Effect of Optimization of TiO2 Electron Transport Layer on Performance of Perovskite Solar Cells with Rough FTO Substrates

Effects of Laser Irradiation on the Photoelectric Properties of Thermal-Annealed Metal/Fluorine-Doped Tin Oxide Transparent Conductive Films

Alkali Metal Fluoride-Modified Tin Oxide for n–i–p Planar Perovskite Solar Cells

To Greatly Reduce Defects Via Photoannealing for High-Quality Perovskite Films.

Facilitating the formation of SnO2 film via hydroxyl groups for efficient perovskite solar cells

Electron Transport Assisted by Transparent Conductive Oxide Elements in Perovskite Solar Cells

A 16.5% Efficient Perovskite Solar Cells with Inorganic NiO Film As Hole Transport Material